The Upper IBOP 110103-500 is a critical well control component manufactured to NOV Varco specifications for the VARCO TDS-4SA top drive system. It installs directly between the top drive spindle and the drill string, serving as the primary barrier against uncontrolled flow from inside the drill pipe.
This inner blowout preventer (IBOP) uses a manual ball valve design with a standard T-handle for operation. Clockwise rotation closes the valve; counter-clockwise opens it. The full-bore design (3-1/4") ensures minimal flow restriction and allows passage of wireline tools and logging equipment when the valve is open.
Direct fit for VARCO TDS-4SA top drive
Working pressure: 5,000 psi (34.5 MPa)
Full bore: 3-1/4" (82.6 mm)
Material: 4130 alloy steel forging
Seals: NBR (nitrile rubber) for standard service
Connections: 4-1/2" IF female (top) / 3-1/2" IF male (bottom)
Operation: Manual T-handle (clockwise close)
API compliance: API Spec 7-1, API 16D
Pressure-energized seats – higher differential pressure creates tighter seal
Polished chrome ball – corrosion resistant and low friction
Forged steel body – no cast porosity, high structural integrity
Field-proven design – used on thousands of TDS-4SA installations worldwide
Land and offshore drilling with VARCO TDS-4SA
Medium-depth wells (≤ 3,500 m)
Workover and completion operations
Non-sour environments (standard NBR version)
For pricing, availability, and technical datasheets:
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.