The Lower IBOP 114706-500 is a secondary inner blowout preventer manufactured to NOV Varco specifications for the VARCO TDS-4SA top drive system. It installs below the top drive, between the upper IBOP and the drill string, serving as a redundant barrier against uncontrolled flow from inside the drill pipe.
While the upper IBOP (110103-500) provides primary isolation, the lower IBOP offers dual barrier protection. This configuration is standard practice for deep well control and is recommended by API 16D for critical operations.
Direct fit for VARCO TDS-4SA top drive (mounts below top drive, above saver sub)
Working pressure: 5,000 psi (34.5 MPa)
Full bore: 3-1/4" (82.6 mm)
Material: 4130 alloy steel forging
Seals: NBR (nitrile rubber) for standard service
Connections: API IF thread (compatible with TDS-4SA lower spindle)
Operation: Manual T-handle (clockwise close)
API compliance: API Spec 7-1, API 16D
Redundant barrier – if upper IBOP leaks or fails, lower IBOP provides backup
Equalization capability – allows pressure equalization before opening upper IBOP
Full bore design – no restriction for wireline tools or logging equipment
Field-proven – used on thousands of TDS-4SA installations worldwide
| Position | Part Number | Primary Role |
|---|---|---|
| Upper IBOP | 110103-500 | Primary barrier, closes before breaking connection |
| Lower IBOP | 114706-500 | Secondary barrier, backup for well control |
Land and offshore drilling with VARCO TDS-4SA
Wells requiring dual barrier isolation (deep or high-pressure wells)
Workover and completion operations where backflow risk is high
Non-sour environments (standard NBR version)
For pricing, availability, and technical datasheets:
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.