VS3 Pump – API 610 Vertical Single-Stage Double Suction Pump for Large Flow Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
VS3 pump is API 610 vertical single-stage double suction centrifugal pump with vertical rotor, double suction impeller for large flow capacity, low NPSH and balanced axial force. Used for large flow, medium head, clean or slightly corrosive liquids in power plant circulating water, raw water intake, refinery cooling water, municipal water supply, chemical plant large flow circulation, seawater lifting. Key features: API 610 VS3 design, double suction impeller balances thrust, high hydraulic efficiency, low NPSH anti-cavitation, vertical compact structure saves floor space, simplified bearings for low maintenance, multiple material options (cast iron, carbon steel, 316L, duplex) for water, oil and mild corrosive media. Get free VS3 datasheet, performance curve, CAD drawing and factory quotation.

Conatct For Details
DetailReview(0)Additional

The VS3 pump is an API 610 vertical single-stage double suction centrifugal pump, designed for large flow, medium head, and low NPSH applications. Its vertical rotor and double suction impeller provide balanced axial thrust, high hydraulic efficiency, and excellent cavitation resistance. The VS3 is widely used in power plant circulating water systems, raw water intake stations, refinery cooling water circuits, municipal water supply, chemical plant large flow circulation, and seawater lifting.

Key Design Features

  • API 610 VS3 Vertical Single-Stage Double Suction – Fully compliant with API 610 (latest edition) for heavy-duty continuous service.

  • Double Suction Impeller – Balanced axial thrust eliminates the need for complex thrust bearings. Lower NPSH requirement and reduced cavitation risk.

  • Large Flow Capacity – Handles high flow rates efficiently (up to 5,000+ m³/h) while maintaining good efficiency across the operating range.

  • Low NPSH Performance – Double suction design splits flow evenly, reducing inlet velocity and NPSHr. Excellent for cooling water and raw water where suction head may be limited.

  • Vertical Compact Structure – Saves valuable floor space compared to horizontal double suction pumps. Motor mounted on top, pump directly below.

  • Simplified Bearing Arrangement – Lower maintenance requirements. Only upper bearings are above the liquid; lower bearing (if present) is water-lubricated.

  • Multiple Material Options – Cast iron (clean water), carbon steel (oily water), 316L and duplex (slightly corrosive or seawater).

Typical Performance Range

  • Flow: up to 5,000 m³/h (22,000 GPM) – depending on size and speed

  • Head: up to 150 m (490 ft)

  • Speed: 740 / 985 / 1480 rpm (low speed for large flow)

  • Temperature: -20°C to +150°C (-4°F to +302°F) – higher with materials

  • Pressure: up to 20 bar (290 psi)

Material Options

  • Casing: Cast iron, carbon steel, 316L, duplex

  • Impeller: Bronze, 316L, duplex, stainless steel

  • Shaft: 4140, 316L, duplex

  • Wear rings: Bronze, hardened 316L

Main Applications

  • Power plant circulating water – Condenser cooling water, auxiliary cooling systems with large flow requirements.

  • Raw water intake – Pumping from rivers, lakes, or reservoirs to treatment plants.

  • Refinery cooling water – Large flow circulation for heat exchanger networks.

  • Municipal water supply – Primary water distribution pumps.

  • Chemical plant large flow circulation – Cooling loops, wash water, process water.

  • Seawater lifting – With duplex materials for corrosion resistance.

Why Choose Our VS3 Pump?

  • High efficiency – Double suction hydraulics reduce losses, saving energy over decades of operation.

  • Low NPSH – Operates reliably where suction head is limited.

  • Compact vertical design – Ideal for space-constrained sites, reduces building costs.

  • Easy maintenance – Back pull-out design (on many sizes) allows motor and rotor removal without disturbing piping.

  • API 610 reliability – Built for continuous 24/7 service in power and industrial plants.

Get Your VS3 Pump Technical Package

We provide free:

  • VS3 datasheet (API 610 format)

  • Performance curve (head, efficiency, NPSHr)

  • CAD drawing (2D vertical pump layout, PDF/DWG)

  • 3D model (STEP/IGES)

  • Factory direct quotation (EXW / FOB / CIF)

How to Request?

Send us your operating conditions:

  • Flow rate (m³/h or GPM)

  • Total head (m or ft)

  • Fluid name and temperature (°C)

  • Any special requirement (material, low NPSH, high temp, ATEX, etc.)

Our engineering team will reply within 24 hours with the recommended VS3 pump model, performance curve, CAD drawing, and factory price.

Email: info@hyrig.com

We are a professional API 610 pump manufacturer (OH1–OH6, BB1–BB5, VS1–VS7 types) serving global power plants, refineries, water utilities, chemical plants, and industrial facilities. Contact us for custom-engineered VS3 vertical double suction pumps at factory direct wholesale pricing.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit