This page provides complete technical parameters for our VS3 API 610 vertical single-stage double suction centrifugal pump. The VS3 is designed for large flow, medium head, low NPSH applications such as power plant circulating water, raw water intake, refinery cooling systems, municipal water supply, and industrial circulation. Its double suction impeller balances axial thrust and provides high hydraulic efficiency.
Performance Range
| Parameter | Value |
|---|---|
| Flow rate | 200 ~ 8,000 m³/h (880 ~ 35,200 GPM) |
| Total head | 15 ~ 120 m (49 ~ 394 ft) |
| Speed | 740 / 980 / 1,480 rpm (low speed for large flow) |
| Medium temperature | -20°C ~ +180°C (-4°F ~ +356°F) – higher with special materials |
| Maximum working pressure | Up to 16 bar (232 psi) – higher on request |
| NPSHr | Low NPSH optimized double suction design – reduces cavitation risk |
Structural & Mechanical Design
Type: Vertical single-stage double suction pump (API 610 VS3 designation)
Impeller: Double suction, symmetric hydraulic design – fully balanced axial thrust, no thrust bearing required
Casing: Vertical split volute casing – efficient flow distribution, easy access for inspection
Shaft: High rigidity vertical alloy shaft – designed for large flow, low speed operation
Bearings: Upper combined bearing set (radial + thrust) – simple structure, long life
Lubrication: Grease lubrication (standard) or oil lubrication (optional)
Installation: Floor mounted or pit mounted vertical arrangement – flexible for site conditions
Material Options
| Component | Standard Materials | Upgrade Options |
|---|---|---|
| Casing | Cast iron, ductile iron, carbon steel | 316L stainless steel, duplex |
| Impeller | Stainless steel (304/316L), bronze | Duplex, super duplex |
| Shaft | 4140 alloy steel | 316L, duplex, K500 |
| Wear rings | Anti-abrasion alloy (cast iron based) | Bronze, hardened 316L, Colmonoy-coated |
Key Design Features Explained
Double Suction Impeller
The double suction design splits flow evenly into both sides of the impeller, eliminating axial thrust. This simplifies bearing arrangement and extends bearing life. Lower inlet velocities also reduce NPSHr by up to 30% compared to single suction pumps.
Vertical Split Volute Casing
The volute casing is vertically split, allowing access to the impeller and internal components without major disassembly. The vertical orientation saves floor space.
Low NPSH Performance
Optimized hydraulic design provides low NPSHr, allowing the VS3 to operate reliably in applications with limited suction head (e.g., cooling water intake from canals or rivers).
Vertical Compact Footprint
The pump occupies minimal ground area – motor on top, pump below. Ideal for power plants, pumping stations, and industrial facilities where space is constrained.
Simple Bearing Arrangement
Only an upper bearing housing (combined radial and thrust bearings) is above the mounting plate. No complex lower bearing system reduces maintenance frequency.
Available Technical Documents (Free Request)
API 610 data sheet (filled with your operating conditions)
Installation dimension drawing (2D CAD, PDF/DWG) – includes foundation bolt pattern, nozzle coordinates, overall height
Performance curve (head, efficiency, NPSHr vs flow)
3D model (STEP/IGES for plant layout)
Material certificate (EN 10204 3.1 or 3.2)
Hydrostatic and performance test report
Typical Applications
Power plant circulating water (condenser cooling)
Raw water intake for treatment plants
Refinery cooling water circulation
Municipal large flow water supply
Chemical plant large flow circulation (cooling loops, wash water)
Seawater lifting (with duplex materials)
Get Your VS3 Pump Technical Specification Package
To request a complete documentation package with a formal quotation, please send us your operating conditions:
Flow rate (m³/h or GPM)
Total head (m or ft)
Fluid name and temperature (°C)
Available NPSH (if known)
Any special requirement (material, low NPSH, vertical pit mounting, ATEX, etc.)
Our engineering team will respond within 24 hours with:
Recommended VS3 pump model (size, impeller trim, material)
Performance curve PDF
API 610 data sheet
2D CAD drawing and 3D model link
Installation recommendations (floor or pit)
Factory direct price (EXW / FOB / CIF)
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1–OH6, BB1–BB5, VS1–VS7 types) serving global power plants, refineries, water utilities, chemical plants, and industrial facilities. Contact us for custom-engineered VS3 vertical double suction large flow pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.