XQ28/1.8Y Hydraulic Sucker Rod Power Tong – Lightweight & Dual‑Speed for Workover

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
The XQ28/1.8Y hydraulic sucker rod power tong is specifically designed for make‑up and break‑out of sucker rod connections in oil well workover operations. It handles CYG16, 19, 22, 25, 28 sucker rods (approx. 5/8″ to 1⅛″) and tubing from φ48–60mm (1 7/8″–2 3/8″). Two‑speed transmission: high gear delivers 0.7 kN·m at 104 rpm for fast spinning; low gear delivers 1.8 kN·m (max rated) at 40 rpm for high‑torque break‑out. System pressure 10 MPa, flow 65 L/min. Features a compact, lightweight design (95 kg) with a hydraulic backup tong that synchronizes with the master tong. Jaw opening 63 mm. Ideal for sucker rod servicing.

Conatct For Details
DetailReview(0)Additional

The XQ28/1.8Y hydraulic sucker rod power tong is a specialized workover tool manufactured by Yancheng TEDA Drilling and Production Equipment Co., Ltd. It is designed for make‑up (running in) and break‑out (pulling out) of sucker rod connections in oil and gas well servicing. With a compact structure, dual‑speed transmission, and synchronized hydraulic backup tong, the XQ28/1.8Y significantly improves efficiency while reducing operator fatigue.


Key Features & Benefits

  • Sucker rod range – Adapts to CYG16, 19, 22, 25, and 28 sucker rods (approximately 5/8″ to 1⅛″). Also handles tubing from φ48 to 60 mm (1 7/8″ to 2 3/8″).

  • Dual‑speed operation – High gear (0.7 kN·m @104 rpm) for fast spinning; low gear (1.8 kN·m @40 rpm) for high‑torque back‑out and final make‑up.

  • Low‑speed high‑torque motor – Provides smooth, powerful output in a compact package.

  • Hydraulic backup tong – Synchronizes with the master tong for simultaneous clamping and releasing. Simply change jaw dies to adapt to different sucker rod sizes.

  • Lightweight and compact – Weighs only 95 kg; dimensions 543×334×404 mm – easy to handle and store on the rig floor.

  • Field‑proven reliability – Backed by TEDA’s extensive experience in workover equipment.


Technical Specifications

Master Tong (XQ28/1.8Y)

ParameterValueUnit
Sucker rod rangeCYG16, 19, 22, 25, 28 (approx. 5/8″ – 1⅛″)—
Tubing rangeφ48 – 60 (1 7/8″ – 2 3/8″)mm / in
High gear rated torque0.7 (approx. 516 ft·lbs)kN·m
Low gear rated torque1.8 (approx. 1328 ft·lbs)kN·m
High gear speed104r/min
Low gear speed40r/min
System pressure10MPa (1450 psi)
Oil flow rate65L/min
Jaw opening63mm (2.5 in)
Weight95kg
Dimensions (L×W×H)543 × 334 × 404mm

Performance Overview

The XQ28/1.8Y offers two distinct operating modes to match different phases of sucker rod handling:

GearTorqueSpeedApplication
High gear0.7 kN·m104 rpmFast spinning of sucker rod threads
Low gear1.8 kN·m40 rpmHigh‑torque break‑out (backing out) and final make‑up

The hydraulic backup tong works in perfect synchronization with the master tong. To change sucker rod sizes, simply replace the jaw dies – no need to adjust other components.


Construction & Safety Features

  • Open‑throat design – Jaw opening of 63 mm allows quick positioning on sucker rod couplings.

  • Hydraulic drive – Smooth, controllable torque with overload protection.

  • Synchronized backup tong – Eliminates separate control, reduces cycle time.

  • Compact footprint – Fits easily in tight workover rig layouts.

Applications

  • Sucker rod replacement and repair in producing wells

  • Workover operations involving sucker rod strings (all common CYG sizes)

  • Light tubing make‑up / break‑out (1.9″ – 2.4″ OD)

Why Choose the XQ28/1.8Y?

The XQ28/1.8Y is one of the few purpose‑built sucker rod power tongs on the market. Most workover crews still use manual tongs or modified tubing tongs for sucker rods – both are inefficient and unsafe. The XQ28/1.8Y provides:

  • Proper torque range – 0.7 kN·m for spinning, 1.8 kN·m for break‑out – exactly what sucker rod threads need.

  • Light weight (95 kg) – One person can handle it on the rig floor.

  • Hydraulic backup tong – Safer and faster than a separate backup.

  • Easy size change – Different jaw dies for different CYG sizes.

For any workover contractor routinely handling sucker rods, the XQ28/1.8Y is a smart investment that pays back through reduced labor, faster cycle times, and fewer thread failures.


Hydraulic Oil Recommendation

Use anti‑wear hydraulic oil with viscosity grade ISO VG 46. Maintain oil temperature below 65°C. Keep oil clean with a filter fineness of ≥0.025 mm (25 microns).


For inquiries, technical data, or to order genuine TEDA parts for XQ28/1.8Y, please contact:

info@hyrig.com

We provide fast response, on‑site training, and full after‑sales support for all XQ series power tongs (sucker rod tongs, tubing tongs, and drill pipe tongs).


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit