The XQ89/3YC hydraulic power tong is a specialized workover tool manufactured by Yancheng TEDA Drilling and Production Equipment Co., Ltd. Designed for efficient tubing make‑up (running in) and break‑out (pulling out), it is an upgraded version of the XYQ3B model. Driven by a low‑speed high‑torque hydraulic motor and equipped with an H‑type manual control valve, the XQ89/3YC combines lightweight construction with field‑proven reliability.
Advanced jaw gripping – Internal curve roller climbing mechanism. No parts change required for 2⅞", 3", and 3½" tubing.
Two‑speed transmission – High gear for fast spinning (100 rpm), low gear for high torque (3.0 kN·m rated, 4.0 kN·m max).
Top‑mounted brake mechanism – Easy adjustment and maintenance on the master tong cover.
Hydraulic backup tong – Works in synchronization with the master tong – clamping and releasing in one step.
Adjustable torque – Simply regulate oil pressure to achieve optimal make‑up torque for different tubing grades.
Multiple Chinese patents – Proven quality and innovation.
| Parameter | Value | Unit |
|---|---|---|
| Tubing range | ½"*, 2⅜", 2⅞", 3½" | in |
| High gear rated torque | 1.1 – 1.6 | kN·m |
| Low gear rated torque | 1.8 – 3.0 | kN·m |
| Maximum torque | 4.0 | kN·m |
| High gear rated speed | 100 | r/min |
| Low gear rated speed | 30 | r/min |
| Jaw opening | 95 | mm |
| Weight (master tong) | 105 | kg |
*Note: ½" tubing is likely a typo; the practical range starts from 2⅜". The design primarily targets 2⅜" to 3½" oil tubing.
| Parameter | Value | Unit |
|---|---|---|
| Tubing / coupling range | 2⅜", 2⅞", 3½" upset tubing | in |
| Jaw opening | 116 | mm |
| Weight | 53 | kg |
| Parameter | Value | Unit |
|---|---|---|
| Overall dimensions (L×W×H) | 650 × 430 × 350 | mm |
| Rated system pressure | 6 – 10 | MPa |
| Max operating pressure | 12.5 | MPa |
| Oil flow rate | 80 | L/min |
| Max hydraulic oil temperature | 65 | °C |
The XQ89/3YC offers two distinct operating modes:
| Gear | Rated Torque Range | Max Speed | Application |
|---|---|---|---|
| High gear | 1.1 – 1.6 kN·m | 100 rpm | Fast spinning, light make‑up |
| Low gear | 1.8 – 3.0 kN·m (max 4.0 kN·m) | 30 rpm | Final make‑up, heavy break‑out |
By adjusting the system pressure within the rated range (6–10 MPa, max 12.5 MPa), operators can fine‑tune torque output to match the specific tubing grade and thread type.
Open‑throat design – Quick positioning on tubing.
Synchronized hydraulic backup – Eliminates separate backup tong control.
Safety door – Must be closed during operation.
Tail rope requirement – 20 kN capacity, attached perpendicularly to the tong during make‑up.
Workover rigs (land and offshore)
Tubing running and pulling (2⅜" – 3½")
Light repair and well maintenance
The XQ89/3YC is one of the lightest hydraulic tubing tongs in its class – master tong only 105 kg, backup 53 kg. This significantly reduces operator fatigue and makes rig‑up faster. Despite its light weight, it delivers 4.0 kN·m of maximum torque – enough for all standard tubing connections. The combination of no‑parts‑change for common tubing sizes, top‑mounted brake for easy service, and synchronized hydraulic backup makes the XQ89/3YC a favorite among workover contractors who value efficiency and simplicity.
Use anti‑wear hydraulic oil with viscosity grade ISO VG 46. Maintain oil temperature below 65°C. Keep hydraulic oil clean with a filter fineness of ≥0.025 mm (25 microns).
For inquiries, technical data, or to order genuine TEDA parts for XQ89/3YC, please contact:
info@hyrig.com
*We provide fast response, on‑site training, and full after‑sales support for all XQ series power tongs (XQ89/3C, XQ89/3YC, XQ114/9, XQ140/12A, and others).*
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.