DIN Globe Valve FAQ | Throttling, F1/F2 & Bellows Seal

2026-11-19 19:36

DIN Globe Valve FAQ

HYRIG can supply DIN globe valves. This FAQ addresses common engineering and procurement questions regarding throttling, pressure ratings, face-to-face series, and bellows seal configurations.

Frequently Asked Questions

Q: What is the main difference between a globe valve and a gate valve?

A globe valve is designed for throttling and frequent operation, while a gate valve is for on/off isolation with minimal pressure drop.

Q: Does DN and PN uniquely define the face-to-face length?

No. DIN 3202 defines multiple series (F1, F2). PN16–PN40 generally uses F1; PN63–PN100 uses F2. Always specify the series.

Q: What is the purpose of an OS&Y design?

An OS&Y (outside screw and yoke) design keeps the stem threads outside the process fluid, preventing corrosion and providing clear visual indication of valve position.

Q: Can a bellows seal globe valve be installed horizontally?

It is not recommended. The weight of the stem and bellows can cause uneven wear. Vertical installation (handwheel up) is preferred.

Q: What is the difference between Trim 1, Trim 8, and Trim 5?

Trim 1 is Cr13 for standard non-corrosive service. Trim 8 and Trim 5 use Stellite for high-temperature, erosive, or severe service.

Q: What is the typical pressure drop across a globe valve?

A globe valve has a higher pressure drop than a gate valve due to the S-shaped flow path. This must be accounted for in pump head calculations.

Q: What testing standards apply to DIN globe valves?

Standard testing is to DIN 3230 and BS EN 12569. API 598 testing can be provided as an option for projects that require it.

Q: What is the typical lead time?

Standard lead time is 4-6 weeks depending on size, PN rating, material, and documentation.

Selection Support

For specific questions regarding your DIN globe valve selection or installation, provide the DN, PN rating, existing gap, stem seal type, and service conditions. Our engineering team will confirm the specification.

Contact

For more information on DIN globe valves, contact HYRIG: info@hyrig.com

Related Pages

Name:
Message:
Verification code:
Submit
Comment