HYRIG can supply DSBC cylinders as replacements for discontinued FESTO DNC and DNCB cylinders. This guide explains the five checkpoints that determine whether a DSBC cylinder is a mechanical drop-in replacement for a DNC cylinder, and where the configured interface may still differ. FESTO identifies the DSBC series as the successor to the proven DNC and DNCB series, with ISO 15552-compliant dimensions that allow replacement of the preceding series.
ISO 15552 standardizes the mounting dimensions, piston rod thread, and port positions for bore sizes 32–320 mm at a maximum rated pressure of 10 bar. This means the mechanical interface is defined at the standard level, but ISO 15552 does not standardize every configured option — cushioning behaviour, seal material, temperature range, port orientation, and sensor slot geometry can still differ between the DNC and DSBC series.
A DSBC cylinder with the same bore and stroke as the existing DNC will bolt onto the same ISO 15552 bracket. But if the DNC was configured with a specific cushioning type, seal material, or port orientation, those details must be verified before the DSBC can be treated as a true drop-in replacement.
The DSBC and DNC series share the same ISO 15552 bore sizes and stroke range. Confirm that the bore and stroke of the DSBC match the existing DNC exactly. A different stroke changes the overall length and the end-of-stroke position, which may interfere with the machine frame or the load attachment.
ISO 15552 defines the port thread for each bore size. For the 40 mm bore, the port is G1/4; for the 63 mm bore, G3/8; for the 100 mm bore, G1/2. Confirm that the existing fittings match the DSBC port thread. If the DNC was configured with a non-standard port thread, the DSBC standard port may not match the existing airline.
The DNC series uses PPV-A adjustable pneumatic cushioning. The DSBC series is available with PPVA (adjustable) or PPSA (self-adjusting) cushioning. PPVA is a direct functional match for the DNC PPV-A: the cushioning screw is accessible and the deceleration can be tuned. PPSA is self-adjusting — it adapts to the load without a tuning screw. If the existing application relies on a specific cushioning setting, choose the PPVA variant to preserve the tuning capability.
ISO 15552 defines the mounting interface, so the DSBC should bolt onto the same bracket or foot as the DNC. However, the accessory part numbers may differ between the two series. Confirm the bracket, foot, and rod clevis part numbers before ordering, especially if the existing DNC was configured with a non-standard mounting accessory.
The DNC and DSBC both use a magnetic piston and sensor slots for proximity switches. Confirm the sensor slot geometry and the proximity switch model. The DSBC profile barrel may have a different slot depth or position than the DNC, which could affect the sensor mounting height or the switching point.
Not sure which DSBC model code replaces your existing DNC cylinder? Send the complete DNC part number (including all suffixes), the required force, the available space, and the mounting bracket part number, and we will confirm the DSBC model code and cushioning variant. Explore the Festo DSBC ISO 15552 cylinder overview for the complete bore and stroke range.
Q: Is the Festo DSBC a direct replacement for the DNC?
A: Mechanically yes on the ISO 15552 interface, but cushioning type, seal material, port orientation, and sensor slot geometry must be verified before treating it as a drop-in replacement.
Q: What is the difference between PPV-A and PPVA cushioning?
A: PPV-A is the DNC adjustable cushioning; PPVA is the DSBC adjustable cushioning. Both use a tuning screw, but the adjustment method and the cushioning length may differ.
Q: Can I use a PPSA DSBC to replace a PPV-A DNC?
A: Mechanically yes, but PPSA is self-adjusting and removes the manual tuning capability. If the application relies on a specific cushioning setting, choose the PPVA variant instead.
Q: What is the lead time for DSBC replacement cylinders?
A: Standard lead time is 2–4 weeks from order confirmation, depending on the bore and stroke. Confirm with HYRIG before ordering.
Q: Does the DSBC use the same seal kit as the DNC?
A: Not necessarily. The seal geometry may differ between the two series. Always use the seal kit specified for the DSBC model.
For FESTO DNC to DSBC replacement verification and model code confirmation, contact HYRIG: info@hyrig.com.