OH1 Pump – API 610 Horizontal Single-Stage Overhung Foot-Mounted Centrifugal Pump

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
OH1 pump is an API 610 horizontal single-stage overhung centrifugal pump, foot-mounted, radial split, end-suction design. Widely used for clean to slightly contaminated, low-to-medium viscosity, neutral or corrosive media in refinery, petrochemical, chemical, power, and general industry. Features: API 610 OH1 compliant, single-stage overhung rotor, foot-mounted base, radial split casing, end suction/top discharge, back pull-out design for maintenance without disconnecting piping, closed or semi-open impeller, double volute for larger sizes, API 682 mechanical seal, ATEX/IECEx optional, compact, high efficiency, low NPSH, 24/7 heavy-duty service. Applications: refinery process, petrochemical transfer, amine/caustic service, cooling water, fire water, boiler feed, seawater, produced water, LPG, MEG, general plant utility. Get OH1 datasheet, performance curve, CAD drawing, and factory quote.

Conatct For Details
DetailReview(0)Additional

The OH1 pump is an API 610 horizontal single-stage overhung centrifugal pump with foot-mounted, radial split, end-suction design. It is the most widely used general-purpose process pump for clean to slightly contaminated, low-to-medium viscosity, neutral or corrosive media in refineries, petrochemical plants, chemical facilities, power stations, and general industrial services.

Key Design Features

  • API 610 OH1 / ISO 13709 Compliant – Meets international standards for heavy-duty process pump reliability and interchangeability (also compatible with ANSI B73.1M for general chemical service).

  • Single-Stage Overhung Rotor – Impeller overhangs from bearing support – compact design, easy maintenance, lower installed cost.

  • Foot-Mounted Base – Casing feet integral with the base for stable alignment on a foundation or baseplate.

  • Radial Split Casing, End Suction / Top Discharge – Standard configuration allows easy piping connection and system integration.

  • Back Pull-Out Design – The entire rotating assembly (impeller, shaft, bearing housing, mechanical seal) can be removed without disconnecting suction or discharge piping. Maintenance downtime is significantly reduced.

  • Closed or Semi-Open Impeller – Closed impeller for clean fluids, semi-open for solids-passing capability (up to 6mm). Double volute casing available for larger sizes to balance radial thrust.

  • API 682 Mechanical Seal – Accommodates all API 682 seal plans (single, dual, tandem). ATEX / IECEx options available for hazardous areas.

  • High Efficiency, Low NPSH – Optimized hydraulic design delivers efficient operation and excellent suction performance.

Typical Performance Range

  • Flow: up to 1,200 m³/h (5,300 GPM) – depending on size

  • Head: up to 250 m (820 ft)

  • Temperature: -40°C to +300°C (-40°F to +572°F)

  • Pressure: up to 25 bar (360 psi) standard – higher on request

  • Speed: 1480 / 2980 rpm (50/60 Hz)

Material Options

  • Casing: Cast iron, carbon steel (WCB), 304, 316L, duplex

  • Impeller: 316L, duplex, bronze, high-chrome

  • Shaft: 4140, 316L, duplex

  • Wear rings: Hardened 316L, Colmonoy-coated

  • Seal: API 682 cartridge mechanical seal (all plans)

Main Applications

  • Refinery process – Crude oil transfer, intermediate streams, reflux, light hydrocarbons

  • Petrochemical transfer – Amine circulation, caustic service, MEG (monoethylene glycol), solvents

  • Chemical industry – Corrosive liquids, acids, alkalis, salts (with 316L or duplex)

  • Power generation – Cooling water, fire water, boiler feed (low to medium pressure), seawater cooling

  • Oil & gas – Produced water, LPG, condensate, utility water

  • General plant utility – Wash water, sump transfer, general liquid pumping

Why Choose Our OH1 Pump?

  • Most cost-effective API 610 pump – Lower initial cost than BB or VS series pumps

  • Easy maintenance – Back pull-out design reduces downtime to hours, not days

  • Global standard compatibility – Parts interchangeable with major API/ANSI pump brands

  • Compact footprint – Ideal for skid-mounted and space-limited installations

  • 24/7 heavy-duty service – Designed for continuous operation in demanding industrial environments

Get Your OH1 Pump Technical Package

We provide free:

  • OH1 datasheet (API 610 format)

  • Performance curve (head, efficiency, NPSHr)

  • CAD drawing (2D installation drawing, PDF/DWG)

  • 3D model (STEP/IGES)

  • Factory direct quotation (EXW / FOB / CIF)

How to Request?

Send us your operating conditions:

  • Flow rate (m³/h or GPM)

  • Total head (m or ft)

  • Fluid name and temperature (°C)

  • Any material or seal preference

Our engineering team will reply within 24 hours with the recommended OH1 pump model, performance curve, CAD drawing, and factory price.

Email: info@hyrig.com

We are a professional API 610 pump manufacturer (OH1, BB1, BB2, BB3, BB4, BB5 types) serving global refineries, petrochemical complexes, power plants, chemical factories, and industrial facilities. Contact us for factory direct pricing and full technical support.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit