The OH1 pump is an API 610 horizontal single-stage overhung centrifugal pump with foot-mounted, radial split, end-suction design. It is the standard general-purpose process pump for low-to-medium pressure, medium head duties in refineries, petrochemical plants, chemical facilities, power stations, and general industry. Below we compare the OH1 against OH2, BB1, and BB2 to help you select the right pump for your application.
Core Advantages of OH1 Pump
Foot‑Mounted – Simple Base, Cost‑Effective, Easy Installation
The casing has integral feet that bolt directly to a baseplate or foundation. No complex centerline supports, reducing foundation cost and installation time.
Back Pull‑Out Design – Fast Maintenance, No Pipe Disconnection
The entire rotating assembly (impeller, shaft, bearing housing, seal) can be removed without disconnecting suction or discharge piping. Maintenance downtime is reduced by up to 70% compared to pumps that require piping removal.
High Efficiency & Low NPSH
Optimized hydraulic design provides high operating efficiency (up to 85%+) and low NPSH requirements, reducing energy cost and allowing use in low suction pressure applications.
Wide Material Range
Available in cast iron, carbon steel, 304/316L stainless steel, duplex, and high-chrome alloys. Covers water, hydrocarbons, acids, caustics, and many corrosive media.
Proven Reliability
The OH1 is the workhorse of global refineries and chemical plants – millions of operating hours, easy spare parts availability, and well-understood maintenance procedures.
OH1 vs OH2 (Centerline‑Mounted Overhung Pump)
| Feature | OH1 (Foot‑Mounted) | OH2 (Centerline‑Mounted) |
|---|---|---|
| Mounting | Foot-mounted on base | Centerline-mounted |
| Temperature range | ≤250°C (≤482°F) – up to 425°C with cooling jacket | ≥250°C to 450°C+ (excellent thermal stability) |
| Thermal expansion | Casing expands downward – may require alignment check | Expands around shaft centerline – no misalignment |
| Cost | Lower | Higher (more complex casing) |
| Typical use | General process, moderate temperature | High temperature service (hot oil, boiler feed) |
Verdict: Use OH1 for temperatures below 250°C where cost and simplicity matter. Use OH2 for high temperature (>250°C) services where thermal stability is critical.
OH1 vs BB1 (Axial Split Between Bearings)
| Feature | OH1 | BB1 |
|---|---|---|
| Configuration | Overhung (impeller at shaft end) | Between bearings (impeller between two bearings) |
| Pressure capability | Low to medium (up to 25 bar) | Medium to high (up to 40 bar) |
| Flow range | Small to medium (up to 2,600 m³/h) | Medium to large (up to 2,800 m³/h) |
| Head range | Low to medium (up to 360 m) | Medium (up to 300 m) |
| Cost | Lower (simpler construction) | Higher (more bearings, larger casing) |
| Maintenance | Back pull-out – very fast | Axial split – open upper half |
| Best for | General process, compact skids | Large flow, higher pressure, continuous heavy duty |
Verdict: Choose OH1 for general-purpose duties where cost and compact footprint are priorities. Choose BB1 for larger flow, higher pressure, or when between-bearings stability is required.
OH1 vs BB2 (Radial Split Between Bearings)
| Feature | OH1 | BB2 |
|---|---|---|
| Configuration | Overhung | Between bearings, radial split |
| Flow range | Small to medium (up to 2,600 m³/h) | Large (up to 3,400 m³/h) |
| Head range | Low to medium (up to 360 m) | Medium to high (up to 450 m) |
| Pressure | Up to 25 bar | Up to 50 bar (higher) |
| Temperature | ≤250°C standard | Up to 425°C (centerline mount) |
| Cost | Lower | Higher |
| Best for | General process, utilities | Refinery main line, high flow, high temperature |
Verdict: OH1 is ideal for general process and utility services. BB2 is required for high flow, high temperature refinery main line duties where between-bearings stability and higher pressure ratings are essential.
Quick Selection Guide – Which Pump Do You Need?
| Requirement | Recommended Pump |
|---|---|
| General process, moderate temperature (<250°C), cost-sensitive | OH1 |
| High temperature (>250°C) overhung duty | OH2 |
| Large flow, higher pressure, between-bearings stability | BB1 or BB2 |
| Ultra-high pressure or extreme critical service | BB3/BB4/BB5 |
| Vertical installation, limited floor space | VS series |
When to Choose OH1 (and When Not To)
Choose OH1 when:
Media temperature ≤250°C (or ≤425°C with cooling jacket)
Pressure ≤25 bar (360 psi)
Flow and head are within OH1 hydraulic range
Compact footprint and low installed cost are important
Easy maintenance (back pull-out) is valued
Do NOT choose OH1 when:
Temperature exceeds 425°C – use OH2 or BB2/BB3
Pressure exceeds 25 bar significantly – use BB1/BB2
Very large flow (>2,600 m³/h) or very high head (>360 m) – use BB series
Extreme reliability or continuous critical service demands between-bearings design
Get an OH1 Pump vs Alternative Comparison for Your Duty
Not sure whether OH1, OH2, BB1, or BB2 is best for your application? Our engineering team provides free pump selection advisory.
Send us your duty point:
Flow rate (m³/h or GPM)
Total head (m or ft)
Operating temperature (°C)
Fluid (and any corrosivity)
Pressure requirement
We will reply within 24 hours with:
Recommended pump type (OH1, OH2, BB1, or BB2)
Side-by-side comparison for your duty
Performance curve, CAD drawing, and API data sheet
Factory direct price (EXW / FOB / CIF)
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1, OH2, BB1, BB2, BB3, BB4, BB5, VS types) serving global refineries, petrochemical plants, power utilities, oil & gas operators, and general industries. Contact us for factory direct pricing, custom engineering, and full technical support.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.