OH1 Pump Applications – API 610 Single-Stage Overhung Pump for Refinery, Petrochemical, Power & General Industry

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
OH1 pump serves multiple industries. Oil refinery: process fluid transfer, crude boosting, distillation circulation, amine/caustic service, product export, tank farm transfer. Petrochemical & chemical: ethylene/propylene plant auxiliaries, solvent circulation, neutral/corrosive media, low-to-medium temperature process. Power generation: cooling water, low/medium pressure boiler feed, condensate return, fire water, plant utility. Oil & gas: produced water, seawater injection, LPG transfer, MEG recovery, pipeline boosting. Water & general industry: water supply, desalination RO feed, pulp & paper, sugar, mining, HVAC, wastewater. We customize OH1 for your exact flow/head/temperature/media – back pull-out design for easy maintenance, API 682 seals, 24/7 heavy-duty reliability.

Conatct For Details
DetailReview(0)Additional

The OH1 pump is an API 610 horizontal single-stage overhung foot-mounted centrifugal pump – the most widely used general-purpose process pump across industries. Its back pull-out design, high efficiency, low NPSH, and compact footprint make it the preferred choice for clean to slightly contaminated, low-to-medium viscosity, neutral or corrosive media. Below are the primary application scenarios.


1. Oil Refinery

  • Process fluid transfer – Moving crude oil, intermediate streams, and finished products between process units.

  • Crude oil boosting – Increasing pressure for pipeline transport to distillation units.

  • Distillation circulation – Reflux pumps for atmospheric and vacuum towers.

  • Amine / caustic service – Circulating lean/rich amine for H₂S removal; caustic wash for sweetening.

  • Product export – Pumping gasoline, diesel, jet fuel, naphtha to storage or loading racks.

  • Tank farm transfer – Moving hydrocarbons between storage tanks and process units.

Why OH1 for refinery: API 610 reliability, back pull-out for quick seal/impeller changes, wide material selection (carbon steel, 316L, duplex) for sour or corrosive services.


2. Petrochemical & Chemical

  • Ethylene / propylene plant auxiliaries – Cooling water circulation, quench water, process water transfer.

  • Solvent circulation – Pumping methanol, ethanol, acetone, MEG, and other solvents.

  • Neutral / corrosive media – Acids (dilute), alkalis, salts, and chemical intermediates.

  • Low-to-medium temperature process – Suitable for temperatures up to 250°C (425°C with cooling).

Why OH1 for chemical: Material flexibility (316L, duplex, high-chrome, PTFE gaskets), API 682 seal options for fugitive emission control, ATEX/IECEx available.


3. Power Generation

  • Cooling water – Circulating water for condenser cooling, auxiliary cooling, and intake water pumps.

  • Boiler feed (low/medium pressure) – Supplying demineralized water to deaerators or medium-pressure boilers (not ultra-high pressure – use BB3/BB4/BB5 for that).

  • Condensate return – Pumping condensate from hotwell or collection tanks back to deaerator.

  • Fire water – Emergency firefighting water supply – reliable, quick start.

  • Plant utility – General wash water, sump transfer, service water.

Why OH1 for power: High efficiency reduces energy cost, compact design fits in plant utility areas, 24/7 continuous duty rating.


4. Oil & Gas

  • Produced water – Pumping water separated from crude oil for treatment or reinjection.

  • Seawater injection – Lifting seawater for reservoir pressure maintenance (low to medium pressure – use BB4/BB5 for high pressure).

  • LPG transfer – Liquid petroleum gas – requires low NPSH and leak-tight seals (dual seals or dry gas).

  • MEG recovery – Monoethylene glycol circulation in hydrate inhibition systems.

  • Pipeline boosting – Intermediate booster stations for crude or refined products.

Why OH1 for oil & gas: Low NPSH designs for light hydrocarbons, API 682 dual seals for emission control, compact skid-mountable footprint.


5. Water & General Industry

  • Water supply – Municipal raw water intake, treated water distribution, booster stations.

  • Desalination RO feed – Low-pressure feed to reverse osmosis systems (for high-pressure RO, use BB3/BB4/BB5).

  • Pulp & paper – Black liquor, white liquor, process water circulation (corrosion-resistant materials).

  • Sugar – Juice transfer, syrup pumping, condensate return.

  • Mining – Dewatering, slurry water transfer, process water.

  • HVAC – Chilled water, hot water circulation for building heating/cooling.

  • Wastewater – Effluent transfer, lift station pumps.

Why OH1 for general industry: Cost-effective, easy maintenance (back pull-out), long service life, global spare parts availability.


Customization for Your Exact Duty

We provide OH1 pumps tailored to your specific operating conditions:

  • Flow / head – Select from our hydraulic range or custom engineer for off-design points.

  • Materials – Carbon steel, 304/316L, duplex, super duplex, cast iron, bronze.

  • Sealing – API 682 all plans (single, dual, tandem) or gland packing.

  • Temperature – Standard up to 250°C; with cooling jacket up to 425°C.

  • Impeller type – Closed (clean fluids), semi-open (slight solids), open (viscous).

  • Baseplate – Grouted or non-grouted (pre-engineered), API heavy-duty.


Get an Application-Specific OH1 Pump Recommendation

To help you select the right OH1 pump for your refinery, petrochemical plant, power station, or general industrial application, please send us:

  • Application name (e.g., "cooling water circulation" or "amine service")

  • Flow rate (m³/h or GPM)

  • Total head (m or ft)

  • Fluid name and temperature (°C)

  • Any special requirement (corrosive, solids, low NPSH, ATEX, etc.)

Our engineering team will respond within 24 hours with:

  • Recommended OH1 pump model (size, impeller trim, materials)

  • Performance curve with duty point

  • API 610 data sheet

  • CAD drawing (2D) and 3D model

  • Factory direct price (EXW / FOB / CIF)

Email: info@hyrig.com

We are a professional API 610 pump manufacturer (OH1, BB1, BB2, BB3, BB4, BB5 types) serving global refineries, petrochemical complexes, power utilities, oil & gas operators, and general industries. Contact us for custom-engineered OH1 pumps at factory direct wholesale pricing.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit