OH3 Pump – API 610 Vertical Overhung Cantilever Sump Pump for Refinery, Chemical & Wastewater

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
OH3 pump is an API 610 vertical overhung cantilever sump pump with no bottom bearing, single overhung impeller design. Widely used for sump tank, pit, tank side liquid pumping in refinery, petrochemical, chemical and wastewater industries. Key features: API 610 OH3 vertical cantilever sump type, no submerged bearing reduces failure and maintenance, long shaft cantilever for deep sump installation, back pull-out for easy inspection and repair, no shaft seal under liquid (lower leakage risk), multiple alloy materials for corrosive media, dry-run resistant design available. Applications: refinery sump recovery, chemical tank transfer, pit drainage, wastewater treatment, plant oily water collection, low-level medium pumping. Get free OH3 datasheet, dimension drawing and factory quotation.

Conatct For Details
DetailReview(0)Additional

The OH3 pump is an API 610 vertical overhung cantilever sump pump with no submerged bearing, featuring a single overhung impeller design at the bottom of a long shaft. It is widely used for sump tank, pit, and tank side liquid pumping in refineries, petrochemical plants, chemical facilities, and wastewater treatment systems. Unlike conventional vertical pumps with submerged bearings, the OH3 design eliminates bearing failures caused by contamination or liquid ingress, significantly improving reliability.

Key Design Features

  • API 610 OH3 Vertical Cantilever Sump Type – Fully compliant with API 610 (latest edition) for heavy-duty sump and pit services.

  • No Submerged Bearing – The bearing assembly is located above the mounting plate, completely out of the pumped liquid. This eliminates bearing contamination, reduces failure risk, and lowers maintenance frequency.

  • Long Shaft Cantilever Design – Adaptable to deep sump installations (standard lengths up to 3 meters, longer on request). No intermediate bearings mean no alignment issues.

  • Back Pull-Out Structure – The entire rotating assembly (shaft, impeller, bearing housing) can be removed from above without draining the sump or disturbing the discharge piping – easy inspection and repair.

  • No Shaft Seal Under Liquid – Unlike submerged pumps, the OH3 has no dynamic seal below the liquid level, greatly reducing leakage risk.

  • Multiple Alloy Materials – Available in carbon steel, 316L stainless steel, duplex, and high-chrome alloys for corrosive or abrasive media.

  • Dry-Run Resistant Design Available – Special bearing and shaft designs allow short periods of dry running without damage.

Typical Performance Range

  • Flow: up to 1,000 m³/h (4,400 GPM) – depending on sump depth and speed

  • Head: up to 150 m (490 ft)

  • Sump depth: up to 3,000 mm standard (longer available)

  • Temperature: up to 250°C (482°F) – higher with special materials

  • Speed: 1480 / 2980 rpm (50/60 Hz) or lower for deep sump

Material Options

ComponentStandard MaterialsUpgrade Options
Casing / columnCarbon steel, 316LDuplex, super duplex
Impeller316L, high-chromeDuplex, CD4MCu, 17-4PH
ShaftForged 4140316L, duplex, K500
Bearing housingCast ironStainless steel

Main Applications

  • Refinery sump recovery – Collecting and pumping oily water, hydrocarbon spills, and drain sumps around process units.

  • Chemical tank liquid transfer – Emptying storage tank pits, containment sumps, and spill collection basins.

  • Pit drainage – Pumping water and light chemical mixtures from underground pits in petrochemical plants.

  • Wastewater treatment – Lifting station pumps, clarifier sump pumps, and sludge pit transfer.

  • Plant oily water collection – API separator sumps, oily water sewer systems.

  • Low-level medium pumping – Pumping from tanks where bottom clearance is limited.

Why Choose Our OH3 Pump?

  • Highest reliability in sump service – No submerged bearing eliminates the #1 failure mode of conventional vertical sump pumps.

  • Easy maintenance – Back pull-out from above – no need to drain the sump or remove discharge piping.

  • Leak-free below liquid – No dynamic shaft seal under the liquid surface means no leakage into the environment.

  • Dry-run capability – Optional design allows the pump to run dry for short periods without damage (e.g., after sump emptying).

  • Corrosion resistance – 316L or duplex materials handle aggressive chemicals, salt water, and sour water.

Get Your OH3 Pump Technical Package

We provide free:

  • OH3 datasheet (API 610 format)

  • Dimension drawing (2D CAD, PDF/DWG) – with sump depth and mounting flange details

  • Performance curve (head, efficiency vs flow)

  • Factory direct quotation (EXW / FOB / CIF)

How to Request?

Send us your operating conditions:

  • Flow rate (m³/h or GPM)

  • Total head (m or ft)

  • Sump depth (mm or inches)

  • Fluid name and temperature (°C)

  • Any solid content or corrosivity information

Our engineering team will reply within 24 hours with the recommended OH3 pump model, dimension drawing, and factory direct price.

Email: info@hyrig.com

We are a professional API 610 pump manufacturer (OH1, OH2, OH3, BB1, BB2, BB3, BB4, BB5, VS types) serving global refineries, petrochemical plants, chemical facilities, and wastewater treatment systems. Contact us for custom-engineered OH3 sump pumps at factory direct wholesale pricing.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit