The OH3 pump is an API 610 vertical overhung cantilever sump pump with no submerged bearing. Its unique design – bearings located above the mounting plate, a long cantilever shaft, and no dynamic seal below the liquid – makes it the most reliable choice for sump, pit, and tank side pumping in demanding industrial environments. Below are the primary application scenarios.
1. Oil Refinery
Oily sump water recovery – Pumping oily water from process unit sumps, API separator collection basins, and drain sumps.
Tank bottom residual liquid pumping – Emptying storage tank containment pits and draining residual hydrocarbons.
Refinery pit drainage – Removing water and light hydrocarbon mixtures from underground pits.
Hydrocarbon medium transfer – Pumping light oils, slop oil, and hydrocarbon-water mixtures from low-level collection points.
Why OH3 for refinery: No submerged bearing eliminates failures caused by sand, sludge, and hydrocarbons. 316L or duplex materials provide corrosion resistance for sour water. Dry-run resistant design handles intermittent sump emptying.
2. Petrochemical & Chemical Plant
Chemical sump tank liquid delivery – Pumping aggressive chemicals from containment sumps to treatment or storage.
Corrosive medium vertical pumping – Handling acids, alkalis, and solvents with 316L, duplex, or PTFE-lined options.
Reactor overflow collection – Pumping overflow from reactor catch basins during emergency or maintenance.
Solvent recovery – Collecting and transferring organic solvents from floor drains and equipment drips.
Why OH3 for chemical: Wide material selection (316L, duplex, high-chrome) for corrosive fluids. No submerged seal eliminates leakage risk. Suitable for temperatures up to 280°C with cooling jacket.
3. Power Plant
Power plant sump drainage – Removing collected water from turbine building sumps, pump house pits, and drainage channels.
Condensate tank pumping – Emptying condensate collection tanks and low-level pits.
Waste water collection and transfer – Pumping plant utility wastewater to treatment systems.
Why OH3 for power: Reliable operation with minimal maintenance. Long cantilever shaft fits deep sumps. Cast iron or carbon steel construction for clean water and condensate.
4. Wastewater & Environmental Protection
Industrial wastewater lifting – Collecting and transferring industrial effluent from deep sumps to treatment trains.
Sewage sump pump – Handling screened sewage and plant sanitary sumps (with semi-open impeller for solids).
Low-level liquid recovery system – Pumping from spill containment basins, equalization tanks, and collection pits.
Why OH3 for wastewater: No submerged bearing – critical for abrasive or fibrous wastewater. Semi-open impeller passes small solids. Strainer option for debris protection.
5. General Industry
Tank side vertical installation – Space-saving vertical mounting alongside storage tanks for transfer and emptying.
Underground pit drainage – Removing water and light liquids from below-grade pits in factories and warehouses.
Liquid storage tank emptying – Draining tanks completely using a vertical cantilever pump through tank top flange.
Why OH3 for general industry: Compact vertical footprint, easy maintenance from above, no need to drain the pit for pump repair.
Custom Solutions for Special Working Conditions
We offer:
Custom sump depth – 500 mm to 5,000 mm or longer.
Material upgrades – Cast iron, carbon steel, 316L, duplex, super duplex, high chrome alloy.
Motor configuration – Standard, explosion-proof (ATEX/IECEx), VFD-ready.
Impeller types – Closed, semi-open, open.
Optional features – Suction strainer, vortex breaker, cooling jacket, wear plates.
Get an Application-Specific OH3 Pump Recommendation
Send us your operating conditions:
Application name (e.g., "refinery oily sump")
Flow rate (m³/h or GPM)
Total head (m or ft)
Sump depth (mm or inches)
Fluid name and temperature (°C)
Any solids or corrosivity
Our engineering team will respond within 24 hours with:
Recommended OH3 pump model (size, material, impeller type)
Performance curve with duty point
Sump installation drawing (2D CAD)
Material and seal recommendations
Factory direct price (EXW / FOB / CIF)
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1, OH2, OH3, BB1, BB2, BB3, BB4, BB5, VS types) serving global refineries, petrochemical plants, power utilities, wastewater treatment facilities, and general industry. Contact us for custom-engineered OH3 sump pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.