OH4 Pump – API 610 Vertical Overhung Centerline Mounted Sump Pump for High Temperature Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
OH4 pump is an API 610 vertical overhung centerline mounted sump pump, upgraded from OH3 for high temperature thermal stability and heavy-duty continuous process service. Features vertical cantilever structure with centerline support, suitable for high temperature up to 400°C, corrosive media, deep sump and tank installation. No submerged bearing – low failure rate, easy maintenance. Long cantilever shaft with customized sump depth. High temperature resistant structure, anti-corrosion alloy material optional (316L, duplex), dry run capability, stable 24/7 operation. Applications: high temperature sump tank, hot oil pit drainage, refinery high temperature waste liquid, petrochemical vertical process pumping, chemical corrosive medium recovery. Get OH4 datasheet, CAD drawing, performance curve and factory quotation.

Conatct For Details
DetailReview(0)Additional

The OH4 pump is an API 610 vertical overhung centerline mounted sump pump, representing an upgraded version of the OH3 specifically optimized for high temperature thermal stability and heavy-duty continuous process service. It features a vertical cantilever structure with centerline support design, making it ideal for high temperature (up to 400°C), corrosive media, deep sump, and tank installation where conventional sump pumps cannot operate reliably.

Key Design Features

  • API 610 OH4 Vertical Overhung Sump Pump – Fully compliant with API 610 (latest edition) for heavy-duty sump and pit services.

  • Centerline Mounted Design for High Temperature Anti-Deformation – Unlike foot-mounted vertical pumps, the centerline support allows even thermal expansion at high temperatures up to 400°C (752°F). No misalignment, no binding, and no seal or bearing distress.

  • No Submerged Bearing – Bearings are located above the mounting plate, completely out of the pumped liquid. Eliminates bearing contamination and failure – the #1 cause of sump pump downtime.

  • Long Cantilever Shaft – Customized sump depth available (up to 3,000 mm or longer). No intermediate bearings, simple and reliable.

  • High Temperature Resistant Structure – Special materials and design features for continuous operation up to 400°C.

  • Anti-Corrosion Alloy Material Optional – 316L, duplex, super duplex, or high-chrome alloys for corrosive or abrasive high temperature media.

  • Dry Run Capability – Optional design allows short-term dry running without damage.

  • Stable 24/7 Operation – Heavy-duty upper bearing housing and robust shaft design for continuous process duty.

Typical Performance Range

ParameterValue
Flow rate3 ~ 1,800 m³/h (13 ~ 7,900 GPM)
Total head5 ~ 160 m (16 ~ 525 ft)
TemperatureUp to 400°C (752°F) – standard high temp design
Sump depthCustomized: 500 mm ~ 3,000 mm+
Speed1480 / 2980 rpm (50/60 Hz)

Material Options

ComponentStandardUpgrade
CasingCarbon steel (for high temp), 316LDuplex, alloy steel
Impeller316L, high-chrome alloyDuplex, 17-4PH (heat treated)
ShaftForged alloy steel (high temp grade)316L, duplex

Main Applications

  • High temperature sump tank – Pumping hot condensate, hot process water, and high temp liquid from sumps.

  • Hot oil pit drainage – Collecting and pumping high temperature thermal oil from pits around heaters and reboilers.

  • Refinery high temperature waste liquid – Handling hot hydrocarbon-water mixtures, sour water, and high temp drain sumps.

  • Petrochemical vertical process pumping – High temperature chemical intermediates and reactor sump recovery.

  • Chemical corrosive medium recovery – High temperature acids, alkalis, and solvents with 316L/duplex materials.

Why Choose Our OH4 Pump?

  • Superior high temperature performance – Centerline mounting eliminates thermal deformation – critical difference from OH3 (foot-mounted).

  • No submerged bearing failure – The OH4 shares the same reliability advantage as OH3, but with high temperature design optimization.

  • Low maintenance – Back pull-out from above; no need to drain sump.

  • Leak-free below liquid – No dynamic seal below the liquid surface.

  • Custom engineered – Sump depth, materials, and motor configuration tailored to your high temperature application.

Get Your OH4 Pump Technical Package

We provide free:

  • OH4 datasheet (API 610 format)

  • CAD drawing (2D installation drawing with sump depth details, PDF/DWG)

  • Performance curve (head, efficiency vs flow)

  • 3D model (STEP/IGES)

  • Factory direct quotation (EXW / FOB / CIF)

How to Request?

Send us your operating conditions:

  • Flow rate (m³/h or GPM)

  • Total head (m or ft)

  • Fluid name and temperature (°C)

  • Sump depth (mm or inches)

  • Any special requirement (corrosive, dry-run, ATEX, etc.)

Our engineering team will reply within 24 hours with the recommended OH4 pump model, drawing, and factory direct price.

Email: info@hyrig.com

We are a professional API 610 pump manufacturer (OH1, OH2, OH3, OH4, BB1, BB2, BB3, BB4, BB5, VS types) serving global refineries, petrochemical plants, chemical facilities, power utilities, and high temperature process industries. Contact us for custom-engineered OH4 high temperature sump pumps at factory direct wholesale pricing.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit