This page provides complete technical parameters for our OH4 API 610 vertical overhung centerline mounted sump pump. The OH4 is an upgraded version of the OH3, specifically engineered for high temperature service up to 400°C, featuring centerline mounting to eliminate thermal deformation and no submerged bearing for maximum reliability in refinery, petrochemical, and high temperature process sump applications.
Performance Range
| Parameter | Value |
|---|---|
| Flow rate | 3 ~ 1,600 m³/h (13 ~ 7,050 GPM) |
| Total head | 5 ~ 150 m (16 ~ 490 ft) |
| Speed | 1480 / 2980 rpm (50/60 Hz) |
| Medium temperature | -40°C ~ +400°C (-40°F ~ +752°F) |
| Maximum working pressure | Up to 18 bar (261 psi) – higher on request |
| Custom sump depth | 500 mm ~ 3,500 mm (longer on request) |
Structural & Mechanical Design
Type: Vertical overhung sump pump (API 610 OH4 designation)
Mounting: Centerline mounted – casing supported at the shaft centerline for even thermal expansion at high temperature, preventing misalignment and binding
Bearing: Upper bearing only – no submerged bearing. Bearings located above mounting plate, completely isolated from pumped liquid
Impeller: Closed (standard for clean high temp fluids) or semi-open (for slight solids) – single suction
Shaft: High strength alloy steel, high temperature resistant – long cantilever design, no intermediate bearings
Casing: Vertical volute, rigid heavy-duty design for high temperature service
Cooling jacket: Optional for ultra-high temperature service (above 300°C) – maintains bearing housing temperature
Material Options
| Component | Standard Materials | Upgrade Options |
|---|---|---|
| Casing | Carbon steel (high temp grade), 316L | Duplex, super duplex |
| Impeller | Stainless steel (316L), high chrome alloy | Duplex, 17-4PH (heat treated) |
| Shaft | Forged alloy steel (high strength, high temp) | 316L, duplex, K500 |
| Wear parts | Anti-corrosion & anti-abrasion alloy | Colmonoy-coated, Stellite |
Key Design Features Explained
Centerline Mounting for High Temperature
Unlike OH3 (foot-mounted vertical pump), the OH4 uses centerline support. The casing expands evenly around the shaft centerline at high temperatures up to 400°C. No misalignment, no binding, no seal or bearing distress – critical for hot oil and high temp waste liquid services.
No Submerged Bearing
The only bearings are located above the mounting plate. They never contact the pumped liquid – eliminating failure from sand, sludge, corrosives, or high temperature. This is the #1 reliability advantage of OH3/OH4 designs.
Long Cantilever Shaft
Custom sump depths from 500 mm to 3,500 mm (or longer). No intermediate bearings means no alignment issues, no stuck bearings, and simple maintenance.
Cooling Jacket Option
For service above 300°C, a cooling jacket on the bearing housing and/or column extension keeps bearings within safe operating limits.
Dry Run Capability
Optional design allows short-term dry running without damage – ideal for intermittent sump emptying.
Available Technical Documents (Free Request)
API 610 data sheet (filled with your operating conditions)
Installation dimension drawing (2D CAD, PDF/DWG) – includes sump depth, mounting flange details
Performance curve (head, efficiency vs flow, multiple impeller trims)
3D model (STEP/IGES for plant layout)
Material certificate (EN 10204 3.1 or 3.2)
Typical High Temperature Applications
Refinery high temperature waste liquid sumps (up to 400°C)
Hot oil pit drainage (thermal oil heaters, reboilers)
High temperature condensate sump recovery
Petrochemical reactor overflow sumps (high temp corrosive)
Chemical high temperature acid/caustic sumps (with duplex)
Get Your OH4 Pump Technical Specification Package
To request a complete documentation package with a formal quotation, please send us:
Flow rate (m³/h or GPM)
Total head (m or ft)
Fluid name and temperature (°C)
Sump depth (mm or inches)
Any special requirement (cooling jacket, material, ATEX, etc.)
Our engineering team will respond within 24 hours with:
Recommended OH4 pump model (size, impeller trim, material)
Performance curve PDF
API 610 data sheet
2D CAD drawing and 3D model link
Cooling jacket recommendation (if required)
Factory direct price (EXW / FOB / CIF)
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1, OH2, OH3, OH4, BB1, BB2, BB3, BB4, BB5, VS types) serving global refineries, petrochemical plants, chemical facilities, power utilities, and high temperature process industries. Contact us for custom-engineered OH4 high temperature sump pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.