The OH4 pump is an API 610 vertical overhung centerline mounted sump pump, upgraded from the OH3 specifically for high temperature, deep sump, heavy-duty continuous service. It features centerline mounting to eliminate thermal deformation and no submerged bearing for maximum reliability. Below we compare the OH4 against OH3, OH1/OH2, and VS pumps to help you select the right vertical sump pump for high temperature applications.
Core Advantages of OH4 Pump
Centerline Mounted → Perfect Thermal Stability at High Temperature
Unlike foot-mounted OH3, the OH4's centerline support allows even thermal expansion at temperatures up to 400°C (752°F). No misalignment, no binding, no seal or bearing distress – critical for hot oil and high temperature waste liquid services.
No Submerged Bearing → Less Failure, Low Maintenance Cost
Bearings are located above the mounting plate, completely isolated from the pumped liquid. Sand, sludge, corrosives, and high temperature cannot damage bearings – eliminating the #1 cause of sump pump failure.
Longer Cantilever Design → Adapt to Deeper Sump Than OH3
Custom sump depths from 500 mm to 3,500 mm (or longer). No intermediate bearings, simple and reliable.
High Temperature Structure → Work Steadily Up to 400°C
Special materials and optional cooling jacket ensure reliable operation at extreme temperatures.
Compact Vertical Layout, Easy Tank Top Installation
Small footprint, mounts directly on tank top or pit edge. No complex foundation required.
OH4 vs OH3 (Foot-Mounted Vertical Sump Pump)
| Feature | OH4 (Centerline Mounted) | OH3 (Foot Mounted) |
|---|---|---|
| Mounting | Centerline support | Flat foot on mounting plate |
| Temperature range | Up to 400°C (752°F) | Up to 280°C (standard) |
| Thermal stability | Excellent – even expansion | Limited – may misalign at high temp |
| Best for | High temperature, heavy-duty | Normal temperature sump |
| Cost | Higher | Lower |
Verdict: Use OH4 for continuous high temperature service (above 280°C, up to 400°C). Use OH3 for normal temperature sump applications.
OH4 vs OH1 / OH2 (Horizontal Overhung Process Pumps)
| Feature | OH4 | OH1 / OH2 |
|---|---|---|
| Orientation | Vertical | Horizontal |
| Mounting | Tank top / pit edge | Floor / baseplate |
| Suitable for sump/pit | Excellent (designed for it) | Poor (needs flooded suction) |
| Submerged bearing | None | N/A |
| High temperature | Up to 400°C (centerline) | OH2 up to 425°C, but horizontal |
Verdict: Use OH4 when pumping from a sump, pit, or tank top where liquid is below grade. Use OH1/OH2 for horizontal process pumping above ground.
OH4 vs VS Pump (Vertical Multistage Sump / Deep Well Pump)
| Feature | OH4 | VS Pump |
|---|---|---|
| Configuration | Single-stage cantilever | Multistage (multiple bowls) |
| Bearings | No submerged bearings | Multiple submerged bearings (bowl bearings) |
| Maintenance | Easy – pull shaft from above | Complex – must pull column and bowls |
| Cost | Lower (simpler construction) | Higher (many stages) |
| Head range | Low to medium (up to 150 m) | High to very high (up to 600+ m) |
| High temperature | Yes (centerline, up to 400°C) | Limited (bearings submerged) |
| Best for | High temp sump, pit drainage | Deep wells, high head water |
Verdict: Choose OH4 for high temperature sump/pit applications with low to medium head and maximum reliability (no submerged bearings). Choose VS pump for deep wells, high head requirements, or clean water service.
Best Applications for OH4 Pump
Refinery hot oil pit drainage (up to 400°C)
High temperature oily sump recovery
Petrochemical reactor overflow collection
High temperature condensate sump (power plant)
Chemical corrosive high temp sump (with 316L/duplex)
Industrial high temperature storage tank emptying
Get an OH4 Pump vs OH3/OH1/OH2/VS Comparison for Your Duty
Not sure which vertical sump pump is best for your high temperature application? Our engineering team provides free pump selection advisory.
Send us your duty point:
Flow rate (m³/h or GPM)
Total head (m or ft)
Operating temperature (°C)
Sump depth (mm or inches)
Fluid (hot oil, high temp water, corrosive, etc.)
We will reply within 24 hours with:
Recommended pump type (OH4, OH3, OH1/OH2, or VS)
Side-by-side comparison for your specific duty
Performance curve and API data sheet
Sump installation drawing (2D CAD)
Factory direct price (EXW / FOB / CIF)
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1, OH2, OH3, OH4, BB1, BB2, BB3, BB4, BB5, VS types) serving global refineries, petrochemical plants, chemical facilities, power utilities, and high temperature process industries. Contact us for custom-engineered OH4 high temperature sump pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.