The OH4 pump is an API 610 vertical overhung centerline mounted sump pump, specifically engineered for high temperature service up to 400°C (752°F). It is the upgraded version of the OH3, optimized for high temperature thermal stability and heavy-duty continuous process service. The centerline mounting eliminates thermal deformation, and the no-submerged-bearing design ensures exceptional reliability. Below are the primary application scenarios.
1. Oil Refinery
High temperature oily sump recovery – Pumping hot oily water and hydrocarbon mixtures from process unit sumps (up to 400°C).
Hot oil tank side pumping – Transferring thermal oil from heater sumps or tank-side pits.
Distillation unit sump liquid transfer – Collecting and pumping high temperature residues and drain liquids from fractionation columns.
Why OH4 for refinery: Centerline mount prevents misalignment at high temperature. No submerged bearing eliminates failure from coke, sand, or sludge. Cooling jacket option for ultra-high temp service.
2. Petrochemical Industry
High temperature process medium collection – Pumping hot chemical intermediates from reactor area sumps.
Reactor overflow drainage – Handling emergency overflow or maintenance drainage from high temperature reactors.
Heat transfer liquid vertical pumping – Circulating or recovering high temperature heat transfer fluids (Dowtherm, Therminol) from sump pits.
Why OH4 for petrochemical: Material options (316L, duplex) for corrosive high temperature media. API 610 compliance for continuous critical service.
3. Chemical Plant
Corrosive & high temperature sump liquid – Pumping hot acids, caustics, and aggressive chemicals from containment sumps (with 316L or duplex).
Solvent recovery – Collecting high temperature organic solvents from distillation or extraction area sumps.
Underground pit high temperature drainage – Removing hot process waste from below-grade pits.
Why OH4 for chemical: Anti-corrosion alloy materials. No submerged seal – zero leakage risk for hazardous chemicals. Dry-run capability for intermittent sump conditions.
4. Power Plant
High temperature condensate sump – Pumping hot condensate from power plant low-point collection sumps (up to 200°C+).
Auxiliary system waste liquid recovery – Collecting high temperature blowdown water and waste from boiler house sumps.
Thermal power pit drainage – Removing hot water from turbine building drains and heat recovery sumps.
Why OH4 for power: Reliable high temperature performance with carbon steel construction. Long cantilever shaft for deep sump access.
5. Industrial Process
High temperature storage tank emptying – Draining residual hot liquids from tank bottom sumps through top-mount installation.
Deep sump medium lifting – Pumping high temperature fluids from deep collection pits (custom depth up to 3,500 mm+).
Corrosive vertical pumping service – General service for high temperature, corrosive, or challenging fluids.
Why OH4 for industrial process: Custom sump depth, material, and high-temperature structure (cooling jacket) for special working conditions.
Custom Solutions for Special Working Conditions
Custom sump depth – 500 mm to 3,500 mm (longer on request)
Material upgrades – Carbon steel, 316L, duplex, super duplex, high chrome alloy
High temperature structure – Cooling jacket for bearing housing, high temperature gaskets, thermal barrier coatings
Impeller types – Closed (clean fluids), semi-open (slight solids)
Motor configuration – Standard, explosion-proof (ATEX/IECEx), VFD-ready
Optional features – Suction strainer, vortex breaker, dry-run protection, wear plates
Get an Application-Specific OH4 Pump Recommendation
To help you select the right OH4 pump for your high temperature sump or pit application, please send us:
Application name (e.g., "refinery hot oil pit" or "chemical corrosive sump")
Flow rate (m³/h or GPM)
Total head (m or ft)
Fluid name and temperature (°C)
Sump depth (mm or inches)
Any special requirement (corrosive, cooling jacket, ATEX, etc.)
Our engineering team will respond within 24 hours with:
Recommended OH4 pump model (size, material, impeller type)
Performance curve with duty point
API 610 data sheet
Sump installation drawing (2D CAD) and 3D model
High temperature configuration recommendation (cooling jacket if needed)
Factory direct price (EXW / FOB / CIF)
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1, OH2, OH3, OH4, BB1, BB2, BB3, BB4, BB5, VS types) serving global refineries, petrochemical plants, chemical facilities, power utilities, and high temperature process industries. Contact us for custom-engineered OH4 high temperature sump pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.