This page presents verified field cases of our API 610 OH3 vertical overhung cantilever sump pumps operating reliably in sump pits, tank bottoms, and low-level liquid recovery services. Each case demonstrates the pump's key advantage – no submerged bearing – resulting in low maintenance, leak-free operation, and stable long-term performance.
Case 1 – Refinery Oily Sump Recovery (Middle East)
Background: A refinery needed a reliable pump for continuous recovery of oily water from a deep sump pit collecting runoff from process units, tank farm drains, and API separator inlet. Conventional submersible pumps failed frequently due to bearing contamination from sand and hydrocarbons.
OH3 Pump Solution:
Flow: 180 m³/h
Head: 35 m
Sump depth: 2,500 mm
Material: Carbon steel casing, 316L impeller
Features: No submerged bearing, dry-run resistant design
Results:
Continuous recovery of oily water for over 3 years without bearing failure
Stable operation – no vibration increase over time
Low maintenance – only annual lubrication of upper bearings
No leakage (no submerged seal) – environmental compliance achieved
Available references: Sump installation drawing, site photo, maintenance log.
Case 2 – Chemical Plant Corrosive Sump (Southeast Asia)
Background: A chemical plant had a sump pit collecting slightly corrosive acidic liquid from reactor overflow and equipment drips. Previous pumps suffered from rapid corrosion and seal leakage.
OH3 Pump Solution:
Flow: 95 m³/h
Head: 22 m
Sump depth: 1,800 mm
Material: 316L stainless steel (casing, impeller, shaft)
Features: No submerged mechanical seal, corrosion-resistant wetted parts
Results:
Anti-corrosion, leak-free long-term service – 2+ years without failure
No submerged bearing means no corrosion-induced bearing seizure
No seal leakage below liquid level – safe for chemical environment
Plant standardized on OH3 pumps for all corrosive sump services
Available references: Material certificate (EN 10204 3.1), installation photo, corrosion inspection report.
Case 3 – Power Plant Wastewater Sump (Asia)
Background: A power plant required multiple sump pumps for pit drainage across various locations: turbine building sump, coal yard sump, and plant utility drainage. Automatic control with level switches was needed.
OH3 Pump Solution:
Three OH3 pump sets (different sizes)
Flow range: 40–250 m³/h
Head: 15–45 m
Sump depth: 1,200–2,000 mm
Material: Cast iron / carbon steel
Features: Automatic level control system, dry-run protection
Results:
Reliable operation all year round – over 2 years without any pump failure
Automatic start/stop based on sump level – no manual intervention
No submerged bearings – pumps handle intermittent operation with dry-running protection
Easy maintenance – pull shaft from above without draining pits
Available references: Control panel schematic, site installation photos, operation log.
Case 4 – Industrial Tank Bottom Liquid Emptying (Europe)
Background: A chemical storage terminal needed a pump to empty residual liquid from the bottom of large storage tanks. Tank bottom clearance was limited, and the pump had to mount through the tank top flange.
OH3 Pump Solution:
Flow: 65 m³/h
Head: 18 m
Sump depth: custom 3,200 mm (tank height)
Material: 316L stainless steel
Features: Long cantilever shaft, no bottom bearing, strainer option
Results:
Efficient and convenient tank bottom emptying – reduces residual liquid to minimum
Custom sump depth matched exact tank height
No submerged bearing – no risk of product contamination from bearing lubricant
Easy installation through tank top nozzle – no bottom support needed
Available references: Tank installation drawing, site photo, pumping performance data.
What You Can Request From Us for Each Case
Installation drawings (sump pit or tank mounting details)
Site photos and installation images
Project parameter sheet (flow, head, depth, material)
Operation reference data (run hours, maintenance intervals)
Why Real Project Cases Matter
Field references prove that our OH3 pumps deliver:
Stable, low-maintenance operation in refinery oily sump service
Corrosion resistance and leak-free performance in chemical sumps (316L)
Automatic, year-round reliability in power plant drainage
Efficient tank bottom emptying with custom depth configurations
Get the Complete OH3 Pump Case Study Package
We can match your sump depth and fluid conditions to similar successful installations. Request the OH3 pump project case PDF or ask for references in your specific industry.
Email: info@hyrig.com
Please specify your industry (refinery / chemical / power / tank terminal) and we will send relevant case studies, installation drawings, and technical data within 24 hours. We also welcome inquiries for custom OH3 sump pump selection and factory direct pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.