This page provides complete technical parameters for our OH5 API 610 horizontal overhung integral gear drive pump. The OH5 combines a pump and gearbox into a single unitized assembly, enabling high-speed operation (3,000–6,000+ rpm) to achieve high head at low flow rates where conventional single-stage pumps at 2,980 rpm cannot meet the duty. It is ideal for light hydrocarbon transfer, condensate boosting, gas plant processes, and refinery auxiliary systems.
Performance Range
| Parameter | Value |
|---|---|
| Flow rate | 2 ~ 800 m³/h (9 ~ 3,520 GPM) |
| Total head | 50 ~ 450 m (164 ~ 1,480 ft) – higher on request |
| Speed | 3,000 ~ 6,000 rpm (gear driven high speed; up to 12,000 rpm available) |
| Medium temperature | -50°C ~ +300°C (-58°F ~ +572°F) |
| Max working pressure | Up to 35 bar (508 psi) – higher on request |
| NPSHr | Optimized hydraulic design for high speed operation (inducer optional) |
Structural & Mechanical Design
Type: Horizontal overhung integral gear drive (API 610 OH5 designation)
Configuration: Pump + gearbox integrated unit – no separate baseplate alignment required; factory-aligned, compact monoblock structure
Casing: Radial split, back pull-out design – rotating assembly removable without disturbing piping
Impeller: Closed single suction, high-speed type – precision cast for high peripheral speeds
Gear unit: Integral precision gear drive – case-hardened alloy steel gears, low noise, high efficiency (up to 98% per stage)
Bearings: Heavy-duty high-speed bearing set – designed for continuous operation up to 12,000 rpm
Seal: API 682 cartridge mechanical seal – supports all plans (single, dual, dry gas)
Material Options
| Component | Standard Materials | Upgrade Options |
|---|---|---|
| Casing | Carbon steel, 316L stainless steel | Duplex, super duplex |
| Impeller | Stainless steel (316L), high alloy (17-4PH) | Duplex, titanium |
| Shaft & gear | High strength alloy steel (case-hardened, precision ground) | 316L, duplex |
| Wear parts | Anti-wear corrosion resistant alloy | Colmonoy-coated, Stellite |
Key Design Features Explained
Integral Gear Drive
Unlike conventional pumps that require a separate gearbox and coupling, the OH5 integrates the gear unit within the pump housing. This eliminates alignment issues, reduces installation space by up to 50%, and provides factory-set gear backlash and bearing preload.
High Speed for High Head Low Flow
Standard pump speeds (2,980 rpm) often cannot achieve required head at low flow without using multiple stages. The OH5 operates at 3,000–6,000+ rpm, allowing a single-stage impeller to generate heads up to 450+ meters, reducing complexity and cost compared to multistage pumps.
Back Pull-Out Maintenance
The entire rotating assembly (impeller, shaft, bearings, mechanical seal) can be removed from the rear without disconnecting piping. Gearbox service can also be performed without removing the pump casing.
API 682 Sealing
Accepts all API 682 seal types. For light hydrocarbons, Plan 11 (internal flush) or Plan 52/53 (dual seals with barrier fluid) are recommended. Dry gas seals available for LPG or low-lubricity fluids.
Available Technical Documents (Free Request)
API 610 data sheet (filled with your operating conditions)
Dimensional drawing (2D CAD, PDF/DWG) – includes pump + gearbox footprint
High-speed performance curve (head, efficiency, NPSHr vs flow at multiple speeds)
3D model (STEP/IGES for plant integration)
Material certificate (EN 10204 3.1 or 3.2)
Gearbox efficiency and vibration test report
Typical Applications
Light hydrocarbon transfer (LPG, propane, butane, NGL)
Condensate boosting in gas processing plants
Amine circulation and glycol dehydration (low flow high head)
Refinery chemical injection and catalyst feed
High pressure low flow process pumping
Get Your OH5 Pump Technical Specification Package
To request a complete documentation package with a formal quotation, please send us your operating conditions:
Flow rate (m³/h or GPM)
Total head (m or ft)
Fluid name and temperature (°C)
Viscosity and specific gravity
Any special requirement (material, seal plan, explosion-proof, ATEX, etc.)
Our engineering team will respond within 24 hours with:
Recommended OH5 pump model (gear ratio, impeller trim)
High-speed performance curve PDF
API 610 data sheet
2D CAD drawing and 3D model link
Gearbox selection and seal recommendation
Factory direct price (EXW / FOB / CIF)
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1, OH2, OH3, OH4, OH5, BB1, BB2, BB3, BB4, BB5, VS types) serving global refineries, petrochemical plants, gas plants, and light hydrocarbon facilities. Contact us for custom-engineered OH5 integral gear drive pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.