| Part No. | Part Name |
|---|---|
| 1132769 | BOP seal kit |
| P257EQ23 | Equalizer needle valve |
| 1101778 | Seal ram outer seal |
| P505SA00A-90 | Seal ram blind inner seal |
| P505SA'XX'A-90 | Seal ram inner seal |
Qty as per parts list; verify against original drawing.
| Item | Value |
|---|---|
| Working pressure | 15,000 psi max |
| Temperature range | -20°F to +250°F |
| Equalizer capscrew torque | 30 ft.lbs max |
| Actuator bolt torque | 150 ft.lbs |
Seal kits support ram sealing and actuator sealing. Equalizer needle valves control pressure equalization across sealing rams. Ram seals are wear components and should be replaced when cuts, cracks or hardness loss are found. Standard fasteners are matching components and are not listed as separate pages.
Looking for replacement parts for the 5 1/8″ 15K Quad BOP? Verify the part number against the original drawing and confirm ram position. See 5 1/8″ 15K Quad BOP, Blind Seal Ram Assembly, Shear Ram Assembly and Equalizer Guide.
Disclaimer: This equipment is designed for high-pressure industrial applications. Ensure strict compliance with local safety standards and verify pressure ratings prior to installation.
Send the BOP serial number, ram drawing reference and required part number. HYRIG will confirm the seal kit and replacement scope. If a part number contains XX, provide the tubing size for matching.
Q: What is included in the BOP seal kit?
A: The seal kit part number 1132769 is listed for the quad BOP; confirm contents against the original drawing.
Q: What does XX mean in P505SA'XX'A-90?
A: XX is a tubing size placeholder; provide the tubing size for matching.
Q: Can standard fasteners be ordered separately?
A: Standard fasteners are matching components; confirm against the original parts list.
Q: What is the lead time for seal kits?
A: Lead time depends on part number and quantity; confirm for urgent downtime or planned shutdowns.
Q: Is this an OEM catalog page?
A: No. It describes replacement parts documented in the operation and maintenance manual.
For 5 1/8″ 15K Quad BOP replacement parts, contact HYRIG: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.