M-I SWACO Compatible Hydrocyclones | 4" Twin & 12" Cones

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG supplies a full range of compatible replacement hydrocyclone cones for M-I SWACO desander and desilter systems. This range includes the 4-inch twin desilter cone (replacing 9622220 / 9622221) and the 12-inch desander cone (replacing 9621280), engineered for drop-in installation on existing manifolds. M-I SWACO is a registered trademark of Schlumberger. HYRIG is an independent supplier of compatible replacement products and is not affiliated with, authorized by, or endorsed by M-I SWACO or Schlumberger.
Conatct For Details
DetailReview(0)Additional

Key Facts



Compatible ModelsM-I SWACO 9622220 (4" Twin), 9621280 (12" Desander)
Cone Sizes4-inch Twin Desilter, 12-inch Desander
Flow Capacity150 GPM (4" Twin at 45 PSI), 500 GPM (12" at 45 PSI)
Separation Range20–40 μm (4" Twin), 40–100 μm (12" Desander)
Body MaterialPolyurethane standard
Manifold InterfaceGrooved-end couplings, matches Mongoose PT and D-Sander headers
Replacement CompatibilityDrop-in replacement for standard M-I SWACO mud cleaner desander/desilter sections

Key Specifications (Complete Model Range)

Parameter4" Twin Desilter Cone12" Desander Cone
Replacement Part No.9622220 (Assembly) / 9622221 (Liner)9621280
Cone Diameter4 in (102 mm) per cone12 in (305 mm)
Flow Capacity150 GPM at 45 PSI (per twin assembly)500 GPM at 45 PSI
Separation Range20–40 μm (API RP 13C)40–100 μm
Body MaterialPolyurethane (Shore 85A–90A)Polyurethane
Apex Options1/2" std; 3/8" (9622338); 5/8" (9622358)Standard; variable available
Coupling TypeGrooved-end interfaceGrooved-end interface
Max Pressure0.35 MPa (50 psi)Verify against manifold pressure

Data source: Technical data table.

Dimensions

ModelOverall HeightInlet/Outlet InterfaceApprox. Weight
4" TwinMatches 9622220 outlineGrooved-end coupling6.8 kg per cone
12" DesanderMatches 9621280 outlineGrooved-end coupling25–30 kg

Structure / Working Principle

Hydrocyclone cones separate solids from drilling fluid using centrifugal force. Mud enters tangentially and spins inside the cone; heavier sand and silt particles are pushed to the wall and exit through the apex (underflow), while cleaner fluid rises through the vortex finder (overflow). The 12" desander handles the primary sand removal at higher flow rates (500 GPM), while the 4" twin desilter polishes the mud by removing fine silt (20–40 μm).

Both sizes feature field-replaceable wear components. The 4" twin cone uses replaceable feed liners (9622221) and interchangeable apexes (9622338 / 9622358). The 12" cone allows for replacement of the internal body and feed sections. This modularity allows you to replace only the worn section without discarding the entire assembly.

Cross-Reference & Replacement

Upgrading or replacing worn cones across your mud cleaner? Here is what to check:

  1. Size and Stage: Confirm whether your manifold needs 12" desander cones (primary sand removal) or 4" twin desilter cones (fine silt removal).
  2. Manifold Coupling: Check the grooved-end connection size against your existing Mongoose PT or D-Sander header.
  3. Wear Part Options: Decide between standard 1/2" apex and optional 3/8" or 5/8" apexes for the 4" twin to match your underflow density target.

Not interchangeable with: Cones designed for non-grooved flanged manifolds or non-standard manifold layouts. If your manifold has a custom bolt pattern, contact HYRIG with the manifold drawing before ordering.

Applications

  • Mongoose PT Mud Cleaners: Direct replacements for worn 4" twin desilter sections.
  • D-Sander Units: 12" desander cones for primary sand removal ahead of the desilter stage.
  • Weighted Mud Systems: Balanced cut points for barite retention and fine solids removal.
  • HDD and Compact Rigs: The 4" twin footprint provides desilter capacity in a smaller envelope.

Selection Support

Not sure whether your manifold accepts 12" desander or 4" twin desilter cones, or whether a 3/8" vs. 1/2" apex is right for your setup?

Send us your manifold drawing or current cone nameplate, and we will confirm the exact matching replacement.

Spare Parts

HYRIG provides a full range of replacement parts for compatible hydrocyclone cones. Whether you need complete assemblies or specific wear components, we supply the critical parts that keep your manifold running:

  • 4" Twin Desilter: Complete assembly (9622220), feed liner (9622221), 3/8" apex (9622338), 5/8" apex (9622358), 90° elbow (9622582).
  • 12" Desander: Complete cone (9621280), body cone, feed section.

To browse individual wear parts and inspection guidelines, see our 4" twin cone wear parts or 12" desander wear parts.

Frequently Asked Questions

Q1: Are these original M-I SWACO hydrocyclone cones?
A: No. HYRIG supplies independent, compatible replacement cones and is not affiliated with or endorsed by M-I SWACO or Schlumberger.

Q2: How do I choose between the 12" desander and 4" twin desilter cones?
A: Use 12" cones to remove sand at 500 GPM; use 4" twin cones to remove fine silt at 150 GPM per assembly.

Q3: Do you supply the 9622338 and 9622358 apex sizes?
A: Yes. The 3/8" (9622338) and 5/8" (9622358) apexes are available as separate wear components for the 4" twin assembly.

Q4: What is the lead time for bulk cone replacement orders?
A: Standard polyurethane cones ship in 2–3 weeks. Plan orders ahead of year-end shutdowns or rig moves.

Q5: What are the most common wear parts on these cones?
A: The 4" twin feed liner (9622221) and apex wear fastest. Inspect them every 500–1,000 operating hours.

Contact

For M-I SWACO-compatible hydrocyclone cone selection and spare parts, contact HYRIG: info@hyrig.com

What to include for fastest quote:

  • Manifold layout or current cone part number
  • Required sizes (4" Twin, 12", or others)
  • Quantity and apex preference
  • Destination port
Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit