The vertical barrel pump consists of six primary assemblies, each engineered for extreme duty.
Material: Forged low‑alloy steel (e.g., AISI 4140) or carbon steel with stainless steel cladding.
Function: Contains the full discharge pressure. The barrel is hydrostatically tested at 1.5× design pressure.
Mounting: Flanged to the discharge head at the top, closed at the bottom by a suction bell.
A removable unit that contains all hydraulic and rotating parts. It includes:
Suction bell – directs flow into the first‑stage impeller.
Diffuser stack – multiple stages of diffusers (static) and impellers (rotating). Diffuser vanes convert velocity to pressure.
Shaft – large‑diameter, hardened steel or stainless steel, with keyed impellers.
Radial bearings – sleeve (journal) bearings located between stages, lubricated by the pumped fluid.
Balance device (balance drum or balance disc) – compensates residual axial thrust.
Type: Closed (enclosed) radial flow for maximum efficiency.
Arrangement: Opposed (back‑to‑back) or in‑line, depending on axial thrust management strategy.
Material: 316L SS, duplex, or precipitation‑hardened steel (for high hardness in abrasive service).
Located in the discharge head or motor adapter, the tilting‑pad thrust bearing absorbs the full down‑thrust generated by the multistage rotor. L10 life ≥25,000 hours per API 610.
Material: Carbon steel or stainless steel.
Function: Supports the driver (motor or turbine), contains the thrust bearing and seal chamber, and routes discharge flow to the piping flange.
Features: Includes vents, drains, and connection for auxiliary piping (cooling, flushing).
The seal chamber is located in the discharge head, where the shaft passes through. It accepts cartridge mechanical seals – single, tandem, or dual pressurised – per API 682 Plan 11, 21, 23, 52, or 53B.
| Component | Clearance | Importance |
|---|---|---|
| Impeller to diffuser front wear ring | 0.2 – 0.4 mm | Maintains efficiency, prevents recirculation |
| Balance drum clearance | 0.3 – 0.5 mm | Controls axial thrust |
| Journal bearing clearance | 0.1 – 0.25 mm | Ensures hydrodynamic lubrication |
For any inquiries, please contact: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.