The Vertical Barrel Pump, officially designated as API 610 Type VS6 (Vertically Suspended, Double-Casing Diffuser Pump), is a specialized high-pressure pump designed for services with extremely low Net Positive Suction Head available (NPSHa). Its core technical advantage is the vertical, double-casing construction: the pump is installed vertically in a cylindrical outer "barrel" or can, which is either buried in the ground or placed inside a tank or sump. This arrangement ensures the lowest stage impeller is always submerged, maximizing the NPSH available.
This pump is the Industry Standard for critical high-head applications, including boiler feed water, offshore seawater lift, crude oil pipelines, and high-pressure hydrocarbon injection.
The term "Vertical Barrel Pump" in industrial engineering refers to the API 610, Type VS6 classification:
| API 610 Type | Casing Design | Mounting | Best Applications |
|---|---|---|---|
| VS1 | Single Casing, Wet Pit | Vertically suspended | General sump pumping, high-flow/low-head |
| VS6 | Double Casing (Can Type) | Suspended inside a fabricated outer can or sump | Low NPSH, high-pressure services like boiler feed, seawater lift |
| VS7 | Double Casing (Closed Line) | Connected to suction piping | High inlet pressure, high-head services |
The construction of this pump is defined by its double-case design built for high pressure and reliability:
Outer Barrel (Can): A cylindrical pressure-retaining vessel that encloses the pump. It allows the pump to be suspended with the suction bell submerged, providing positive pressure on the first-stage impeller.
Inner Pump Assembly (Cartridge): A removable assembly containing the hydraulic stages (impellers & diffusers), shaft, and radial bearings.
Radial & Thrust Bearings: A combination of radial sleeve bearings (within the stages) for rotor support and a Kingsbury-type tilting-pad thrust bearing at the top to absorb the down-thrust.
Stuffing Box & Sealing: Provides dynamic sealing at the shaft penetration point in the discharge head, per API 682.
Discharge Head: The mounting point for the driver and the connection for discharge piping.
| Service | Recommended API 682 Seal Arrangement | Plan | Remarks |
|---|---|---|---|
| High-Temperature Water / Condensate | Arrangement 1 (Single, Type B) | Plan 21 / 23 | High-temperature durability |
| High-Pressure Water Injection | Arrangement 2 (Tandem, Type B) | Plan 52 | Buffer fluid for emissions control |
| Low Temperature / LNG | Arrangement 3 (Double, Type A) | Plan 53B | Zero emissions for hazardous fluids |
All wetted parts meet API 610 Table H classes, with EN 10204 3.1 material certification.
Low NPSH Requirement: The vertical, double-casing design submerges the impeller, ideal for cryogenic fluids and other low-NPSH services.
High-Pressure Containment: Its outer barrel is rated for extreme pressures, often exceeding 200-300 bar.
High Reliability: The heavy-duty bearing design and double-casing provide high reliability.
Excellent NPSH: The vertical suspension ensures a flooded impeller for very low NPSH applications.
| Test | Standard Industrial | API 610 vs. ISO 13709 Performance |
|---|---|---|
| Hydrostatic test | 1.5x design pressure | - |
| Performance test | Water at rated speed per ISO 9906 Grade 2 or 3 | API 610 Grade 2 Performance |
| NPSH test | Available | API 610 full verification |
| Material certification | EN 10204 3.1 | Available |
Each pump is supplied with a certified performance curve, material certificates, and dimensional drawings.
API 610 full compliance (VS6): 11th/12th edition ISO 13709, 20-year design life, 3‑year continuous run.
Double-casing pressure containment: Outer barrel provides robust pressure containment for high-pressure services.
Low NPSH design: Vertical double-casing design ensures suction stage is fully submerged, suitable for cryogenic and low NPSHa applications.
Severe duty rating: Capable of pressures up to 350 bar and temperatures down to –196°C (LNG) or up to 200°C.
API 682 mechanical seals: Cartridge seals with Plan 52 or 53B fully supported.
High-performance materials: AISI 316L (S-8), duplex, super duplex, and low-temperature steel options.
High-head multistage: Radial diffuser stages with opposed impellers for axial thrust balancing.
Proven service: Tens of thousands of VS6 pumps operating in LNG terminals, boiler feed systems, offshore platforms, and water injection plants.
For detailed selection of the correct custom API 610 vertical barrel pump for your application, please contact our engineering team.
Email: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.