Our vertical barrel pump is designed and manufactured to API 610 11th/12th edition (ISO 13709:2009/2021) for centrifugal pumps in petroleum, petrochemical, and natural gas industries.
Key API 610 requirements met or exceeded:
| Requirement | VS6 compliance |
|---|---|
| Design life | 20 years minimum |
| Continuous operation | ≥3 years uninterrupted |
| Bearing L10 life | ≥25,000 hours |
| Critical speed | ≥120% of maximum operating speed |
| Hydrostatic test | 1.5× design pressure, 30 min hold |
| Performance test tolerance | API 610 Grade 2 (Grade 1 optional) |
| NPSH verification | Full test (if specified) |
The seal chamber in the discharge head is API 682 compliant, accepting all arrangements:
| Arrangement | Typical plan | Service |
|---|---|---|
| Arrangement 1 (single) | Plan 11, 21, 23 | Clean, non‑hazardous fluids |
| Arrangement 2 (tandem) | Plan 52 | Hydrocarbons, moderate risk |
| Arrangement 3 (dual pressurised) | Plan 53B (bladder accumulator) | H₂S, toxic, zero emission required |
For sour service (H₂S partial pressure >0.05 bar), all wetted parts are supplied with NACE MR0175 / ISO 15156 certification, including:
Hardness control
Material cert (EN 10204 3.1 with NACE line)
SSC (sulphide stress cracking) resistance
Available for explosive atmospheres:
ATEX II 2G Ex h IIB T4 (gas)
IECEx Zone 1, Group IIB
Optional certification for European pressure equipment directive – Category III depending on fluid and pressure.
CE Marking – Machinery directive 2006/42/EC
WRAS / NSF 61 – Potable water (on request)
Lloyd’s / DNV / BV – Marine and offshore type approval
For any inquiries, please contact: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.