The VS1 pump is an API 610 vertical submerged multistage centrifugal pump, specifically designed for installation inside tanks, sumps, or vessels. Unlike horizontal or vertical dry-installed pumps, the VS1 is fully submerged in the pumped liquid, offering exceptional low NPSH performance and the ability to handle high head requirements from low liquid levels. It is widely used in refineries, petrochemical plants, chemical facilities, and power plants for tank internal pumping, condensate boosting, and low-level high-lift applications.
Key Design Features
API 610 VS1 Vertical Submerged Multistage Design – Fully compliant with API 610 (latest edition) for heavy-duty continuous service. The entire pump (suction, impellers, diffusers, discharge column) is submerged inside the tank or sump.
Entire Pump Submerged Inside Tank / Sump – No suction piping required. The pump draws liquid directly from the tank, eliminating suction line losses and reducing NPSHr.
Excellent Low NPSH Performance, No Cavitation Easily – The submerged design provides natural positive suction head. First-stage inducer or specially designed suction impeller further reduces NPSHr, making it ideal for boiling point or low NPSH services (condensate, light hydrocarbons, hot water).
Multistage Impeller for High Head Pressurization – Multiple stages (2 to 15+) in series generate high head without requiring large diameter impellers or high peripheral speeds. Head up to 600+ meters.
Compact Vertical Structure, Save Floor Space – Vertical configuration occupies minimal ground area. No large concrete foundation or baseplate required.
No Complex Foundation Required – The pump discharges through a headplate that rests on the tank nozzle or vessel flange. Simple support structure.
Multiple Alloy Materials – Carbon steel, 316L, duplex, super duplex, and high-chrome alloys for corrosive, high-temperature, or abrasive media.
Typical Performance Range
Flow: up to 800 m³/h (3,520 GPM) – depending on tank size and column length
Head: up to 600+ m (1,970+ ft) – multistage
Temperature: -40°C to +250°C (-40°F to +482°F) – higher with special materials
Pressure (discharge): up to 50 bar (725 psi)
Column length: custom, up to 6,000+ mm (20+ ft)
Material Options
Casing/column: Carbon steel, 316L, duplex, super duplex
Impeller: 316L, duplex, high-chrome, bronze
Shaft: 4140, 316L, duplex, K500
Wear rings: Hardened 316L, Colmonoy
Main Applications
Tank internal pumping – Pumping liquid directly from storage tanks, day tanks, or process vessels. No external suction piping.
Sump high head delivery – Lifting liquid from deep sumps to higher elevation with multistage pressure.
Condensate boosting – Pumping hot condensate from low-level collection tanks to deaerators or boiler feed systems.
Refinery process tank transfer – Transferring crude, intermediates, or products from tank bottoms.
Petrochemical medium circulation – Circulating heat transfer fluids or process liquids from tanks.
Low liquid level high-lift pumping – Applications where liquid level is below pump centerline or NPSH is limited.
Why Choose Our VS1 Pump?
Lowest NPSH requirement – Submerged design + optional inducer eliminates cavitation.
High head with compact footprint – Multistage design in a vertical package.
Simple installation – No foundation, no suction piping, no priming.
Leak-free suction – No suction-side mechanical seal; only discharge seal above liquid.
Custom column length – Fits any tank or sump depth.
Get Your VS1 Pump Technical Package
We provide free:
VS1 datasheet (API 610 format)
Performance curve (head, efficiency, NPSHr)
CAD drawing (2D installation drawing with column length, PDF/DWG)
3D model (STEP/IGES)
Factory direct quotation (EXW / FOB / CIF)
How to Request?
Send us your operating conditions:
Flow rate (m³/h or GPM)
Total head (m or ft)
Fluid name and temperature (°C)
Tank/sump depth (mm or inches)
Any special requirement (material, low NPSH, ATEX, etc.)
Our engineering team will reply within 24 hours with the recommended VS1 pump model, performance curve, CAD drawing, and factory price.
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1, OH2, OH3, OH4, OH5, OH6, BB1, BB2, BB3, BB4, BB5, VS1, VS2, VS3, VS4, VS5, VS6, VS7 types) serving global refineries, petrochemical plants, chemical facilities, power utilities, and condensate systems. Contact us for custom-engineered VS1 submerged multistage pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.