This page provides complete technical parameters for our VS1 API 610 vertical submerged multistage centrifugal pump. The VS1 is designed for installation inside tanks, sumps, or vessels, with the entire pump fully submerged in the pumped liquid. Its multistage design delivers high head while the submerged configuration provides ultra-low NPSH, making it ideal for low-level liquid lifting, condensate boosting, and tank transfer applications in refineries, petrochemical plants, chemical facilities, and power utilities.
Performance Range
| Parameter | Value |
|---|---|
| Flow rate | 3 ~ 1,200 m³/h (13 ~ 5,280 GPM) |
| Total head | 50 ~ 1,200 m (164 ~ 3,940 ft) – higher on request |
| Speed | 1,480 / 2,980 rpm (50/60 Hz) |
| Medium temperature | -40°C ~ +380°C (-40°F ~ +716°F) – higher with special materials |
| Maximum working pressure | Up to 120 bar (1,740 psi) |
| NPSHr | Ultra low NPSH submerged design (inducer optional for extreme low NPSH) |
Structural & Mechanical Design
Type: Vertical submerged multistage pump (API 610 VS1 designation)
Installation: Fully submerged inside tank, sump, or vessel – no suction piping required; pump draws liquid directly from the vessel
Number of stages: 2 ~ 10 stages customizable – more stages on request for higher head
Casing: Multistage segmental structure – each stage consists of diffuser and impeller; stacked and held together by tie rods
Shaft: Long vertical alloy shaft, high rigidity – designed for submerged operation with minimal deflection
Bearings: Internal liquid lubricated bearings (product lubricated) – located between stages and at column intervals; no external lubrication required
Outlet: Top discharge vertical arrangement – discharge through headplate mounted on tank nozzle or vessel flange
Material Options
| Component | Standard Materials | Upgrade Options |
|---|---|---|
| Casing / column | Carbon steel, 316L stainless steel | Duplex, super duplex |
| Impeller | Stainless steel (316L), high chrome alloy | Duplex, bronze |
| Shaft | Forged alloy steel (4140), 316L | Duplex, K500 |
| Wear rings / bushings | Anti-corrosion & anti-abrasion alloy | Colmonoy-coated, Stellite |
| Internal bearings | PTFE / carbon / silicon carbide | High temperature grades |
Key Design Features Explained
Ultra Low NPSH Submerged Design
Because the entire pump is submerged below the minimum liquid level, the static head of the liquid column provides positive suction pressure. This eliminates cavitation even for boiling point liquids (condensate, light hydrocarbons, hot water). An optional inducer can further reduce NPSHr.
Multistage for High Head
Multiple stages (2–10) allow the VS1 to achieve heads up to 1,200 meters without requiring high-speed operation or large impeller diameters. Each stage adds pressure incrementally.
Vertical Submerged Construction
The pump hangs from a headplate that rests on the tank nozzle or sump flange. No foundation, no baseplate, no suction piping. The entire weight is supported by the tank or vessel.
Liquid Lubricated Bearings
Internal bearings are lubricated by the pumped liquid itself. No oil or grease required, making the pump suitable for clean liquids where contamination is a concern.
Top Discharge
Discharge piping connects above the tank. The discharge column extends from the pump bowl assembly up to the headplate.
Typical Applications
Tank internal pumping (storage tanks, day tanks, process vessels)
Condensate boosting from low-level collection tanks
Low NPSH high head service (boiling point liquids)
Refinery tank transfer (crude, intermediates, products)
Petrochemical sump pumping with high head requirement
Low liquid level high-lift pumping
Available Technical Documents (Free Request)
API 610 data sheet (filled with your operating conditions)
Tank installation drawing (2D CAD, PDF/DWG) – includes column length, headplate dimensions, tank nozzle interface
Performance curve (head, efficiency, NPSHr vs flow)
3D model (STEP/IGES for plant layout)
Material certificate (EN 10204 3.1 or 3.2)
Hydrostatic and performance test report
Get Your VS1 Pump Technical Specification Package
To request a complete documentation package with a formal quotation, please send us your operating conditions:
Flow rate (m³/h or GPM)
Total head (m or ft)
Fluid name and temperature (°C)
Tank/sump depth (mm or inches) – to determine column length
Any special requirement (material, low NPSH, inducer, ATEX, etc.)
Our engineering team will respond within 24 hours with:
Recommended VS1 pump model (number of stages, column length, material)
Performance curve PDF
API 610 data sheet
2D CAD drawing (tank installation) and 3D model link
Bearing and wear ring recommendations
Factory direct price (EXW / FOB / CIF)
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1, OH2, OH3, OH4, OH5, OH6, BB1, BB2, BB3, BB4, BB5, VS1–VS7 types) serving global refineries, petrochemical plants, chemical facilities, power utilities, and condensate systems. Contact us for custom-engineered VS1 submerged multistage pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.