The VS5 pump is an API 610 vertical multistage long shaft sump pump, featuring a long vertical column and multistage impeller design. It is installed over a sump, pit, or tank with the motor mounted on a top deck – no submerged motor, no risk of motor flooding or contamination. The VS5 is ideal for medium‑to‑high head, deep sump, low NPSH process and utility services in refineries, petrochemical plants, power plants, and mining operations.
Key Design Features
API 610 VS5 Vertical Multistage Long Shaft – Fully compliant with API 610 (latest edition) for heavy‑duty continuous service.
Top Motor Installation, No Submerged Motor – Motor mounted on top deck or grade level. No sealed motor required, no underwater electrical connections. Easy access for inspection and maintenance.
Customizable Long Column Depth for Deep Sump – Column length matched to your sump or pit depth (3 m to 15 m+). Reaches deep levels where horizontal pumps cannot be installed.
Multistage Structure for High Head Pressurization – Multiple stages (2–8+) generate high head (up to 300+ m) without requiring large diameter or high speed impellers.
Liquid Lubricated Line Shaft Bearings – Bearings along the shaft are lubricated by the pumped liquid. No external oil system; simple and reliable.
Wide Material Selection – Cast iron, carbon steel, 316L, duplex, high‑chrome alloys for water, oil, corrosive, or abrasive media.
24/7 Continuous Heavy‑Duty Operation – Designed for years of uninterrupted service in critical process and utility applications.
Typical Performance Range
Flow: up to 600 m³/h (2,640 GPM)
Head: up to 300+ m (985+ ft) – multistage
Column depth: custom – 3 m to 15 m+ (10 ft to 50 ft+)
Temperature: -20°C to +200°C (-4°F to +392°F) – higher with special materials
Pressure: up to 30 bar (435 psi)
Speed: 1,480 / 2,980 rpm (50/60 Hz)
Material Options
Column/casing: Cast iron, carbon steel, 316L, duplex
Impeller: 316L, bronze, duplex, high‑chrome
Shaft: 4140, 316L, duplex
Line shaft bearings: PTFE, bronze, rubber‑lined
Main Applications
Deep pit drainage – Removing water from deep underground pits in refineries and chemical plants.
Sump high‑head pumping – Lifting liquid from deep sumps to higher elevation or pressure.
Refinery oily water recovery – Pumping oily water from API separator sumps or collection pits.
Power plant condensate lifting – Raising condensate from low‑level hotwells to deaerators.
Chemical tank medium transfer – Pumping corrosive or non‑corrosive liquids from deep tanks.
Mine deep water pumping – Dewatering deep open pit or underground mines.
Why Choose Our VS5 Pump?
No submerged motor – Eliminates motor flooding risk and underwater electrical failures.
High head without high speed – Multistage design achieves high pressure at standard motor speeds.
Deep sump capability – Custom column reaches any depth.
Low NPSH – Submerged first stage suits low liquid level conditions.
Easy maintenance – Top‑mounted motor; entire rotating assembly pulls vertically.
Get Your VS5 Pump Technical Package
We provide free:
VS5 datasheet (API 610 format)
Performance curve (head, efficiency, NPSHr)
CAD drawing (2D column installation, PDF/DWG)
3D model (STEP/IGES)
Factory direct quotation (EXW / FOB / CIF)
How to Request?
Send us your operating conditions:
Flow rate (m³/h or GPM)
Total head (m or ft)
Fluid name and temperature (°C)
Sump or pit depth (mm or inches)
Any special requirement (material, stages, low NPSH, ATEX, etc.)
Our engineering team will reply within 24 hours with the recommended VS5 pump model, performance curve, CAD drawing, and factory price.
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1–OH6, BB1–BB5, VS1–VS7 types) serving global refineries, petrochemical plants, power utilities, chemical facilities, and mining operations. Contact us for custom‑engineered VS5 vertical multistage long shaft sump pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.