The Water Injection Pump is a critical rotating equipment for oil and gas field reservoir pressure maintenance (waterflooding) and produced water disposal. In secondary recovery operations, treated water (seawater, produced water, or aquifer water) is injected under high pressure into the reservoir to displace remaining oil toward production wells and maintain reservoir pressure. Water injection is the single most effective method for extending the productive life of an oil field and maximizing ultimate oil recovery.
All water injection pumps engineered for this service must comply with API 610 11th/12th edition (ISO 13709) standards, ensuring minimum 3-year uninterrupted operation and a 20-year design life. Due to the high pressures, corrosive nature of seawater or produced water, and continuous duty cycle of waterflood services, the pump construction must be exceptionally robust with specialized materials and sealing systems.
Water injection pumps are classified under API 610 across four primary configurations. The BB5 barrel pump (double-casing, radially split multistage) is the most widely specified configuration for high-pressure water injection due to its superior pressure containment and containment of high-energy fluids.
| Pump Type | Construction | Best Water Injection Application |
|---|---|---|
| BB5 Barrel (Preferred) | Double casing (inner+outer), radially split barrel, between bearings, centerline mounted | High-pressure (50–300 bar), medium-to-high flow waterflood; seawater injection; onshore and offshore injection platforms |
| BB3 Axial Split | Single casing, axially split, between bearings, multistage, centerline mounted | Medium-to-high pressure water injection; where maintenance access is a priority; waterflood services |
| OH2 Overhung | Single-stage, overhung, centerline mounted | Low-to-medium pressure water injection (<50 bar); injection booster service; deoxygenated water pumps |
| VS4 / VS6 Vertical | Vertically suspended, diffuser pump, wet pit (VS4) or closed suction (VS6) | Seawater lift from caissons or sumps; low NPSHa conditions; offshore platform space constraints |
The DDHF multi-stage, double-casing, centrifugal barrel pumps (BB5) are engineered for reliable 20-year operation, well proven with over 1,000 units installed worldwide. Similarly, the A-Line barrel pumps (BB5) feature capacity up to 1,400 m³/h (6,160 gpm) with operation limits including flow up to 1,400 m³/h and head covering medium-to-high heads.
The BB5 barrel pump is the preferred choice for high-pressure water injection where safety and containment are paramount. Construction features include:
Double-casing design: Outer barrel acts as pressure vessel containing internal rotating element. The inner assembly can be withdrawn for maintenance while the outer casing remains installed on the baseplate.
Diffuser-type stage design: Superior efficiency and lower radial loads at off-design operating conditions (turndown operation common in waterflood injection).
Radially split, between bearings configuration: Handles high differential pressures up to 300 bar (4,350 psi).
Centerline mounting: Maintains alignment during thermal cycling.
All API 610 Table H materials: Carbon steel, 316L SS, duplex, super duplex, and specialty corrosion-resistant alloys.
BB5 barrel pumps are used for heavy-duty pipeline, water injection, boiler feed water, and process charge services across oil and gas, refineries, petrochemicals, and related industries.
For medium-to-high pressure water injection where casing access for maintenance is a priority, BB3 axially split pumps offer:
Single casing (no double-wall construction) with lower capital cost
Removable upper casing half provides full rotor access without disturbing piping
Dual volute design balancing radial thrust
Lower pressure rating than BB5 (typically up to 150 bar)
Well suited for between-bearings, axially split multistage pumps for pipeline, refinery and waterflood services
The BB3 configuration is suitable for waterflood applications where injection pressures do not exceed approximately 150 bar and where more frequent maintenance access is anticipated.
For lower-pressure water injection duties (typically injection pressures below 50 bar), OH2 single-stage overhung pumps provide:
Compliant with API 610 OH2 – overhung, centerline-mounted, single-stage
Compact footprint and easy seal/bearing maintenance
Back pull-out design – rotating assembly removable without disconnecting piping
For clean water or minimally corrosive water injection booster service
Offshore platforms face space constraints and low NPSHa conditions. API 610 VS4 vertical sump pumps and VS6 vertical turbine pumps are installed in platform legs or caissons to lift seawater from the sea chest to the water treatment and injection package. The vertical pump is API 610 current edition compliant, vertical close coupled, single or multistage turbine pump, with a fabricated discharge head, top mounted motor, and wet pit (VS4) or closed suction (VS6). Applications include offshore platform and seawater lift.
The VS6 vertical pump (vertically suspended double casing diffuser pump) is suitable for low-NPSH applications, pipeline boosters, and seawater lift on offshore platforms.
| Parameter | Range / Value |
|---|---|
| Flow rate | Up to 1,400 m³/h (6,160 gpm) |
| Head | Up to 2,600 m (8,500 ft) – varies by model |
| Pressure rating | Up to 300 bar (4,350 psi) |
| Temperature rating | Up to 150°C (300°F) |
| Speed | Up to 6,000 rpm |
| Parameter | Range / Value |
|---|---|
| Flow rate | 300 – 1,500 m³/h |
| Head | 500 – 1,500 m |
| Pressure rating | Up to 150 bar (2,175 psi) |
| Temperature rating | Up to 150°C |
| Parameter | Range / Value |
|---|---|
| Flow rate | Up to 840 m³/h |
| Head | Up to 900 m |
| Pressure rating | Up to 110 bar |
| Temperature rating | –196°C to +150°C |
Water injection services (particularly seawater and produced water containing chlorides, H₂S, CO₂, and dissolved oxygen) are highly corrosive and require rigorous material selection per API 610 Table H.
| Water Quality | Recommended API 610 Class | Material | PREN Value |
|---|---|---|---|
| Fresh water / aquifer | C-6 / S-8 | Carbon steel / 316L SS | <30 |
| Produced water (low H₂S) | S-8 | 316L stainless steel | 25-30 |
| Produced water (high H₂S) | D-1 / D-2 | Duplex 2205 / 25Cr super duplex | >35 |
| Seawater injection (standard) | D-1 (Duplex) / D-2 (Super Duplex) | 25Cr super duplex / 2205 duplex | >40 |
| Seawater injection (severe) | D-2 / U-8 | Super Duplex UNS S32750 (2507) | >42 |
| Sour water (H₂S + Cl⁻) | D-1 / D-2 with NACE MR0175 | Duplex / super duplex NACE certified | >40 |
It is recommended that materials have a PREN (Pitting Resistance Equivalent Number) >40 for seawater injection applications, with suitable alloys including 25Cr super duplex and CRA 2550E.
Super Duplex UNS S32750 is specifically applicable to water injection systems in oil and gas equipment and offshore platforms.
For produced water injection containing H₂S, materials must be selected per NACE MR0175 / ISO 15156. Super duplex materials meeting NACE MR0175 requirements provide resistance to hydrogen sulfide cracking – carbon steel at elevated temperatures will not be suitable and will crack rapidly in operation.
For Shell's tension leg platform offshore Malaysia at water depth of 500 meters, four highly engineered, variable speed drive barrel pumps (BB5) of super duplex stainless steel construction were supplied, built in accordance with ISO 13709 / API 610.
For produced water treatment and reservoir pressure maintenance re-injection, API 610 OH2 super duplex pumps with Plan 53B buffer fluid seal support systems are commonly supplied.
Water injection pumps (particularly those handling seawater or produced water containing H₂S) require robust sealing solutions to prevent fugitive emissions and maintain long-term reliability.
| Seal Arrangement | API 682 Plan | Water Injection Application |
|---|---|---|
| Single seal | Plan 11 / 21 | Clean, non-hazardous water (<50 bar) |
| Single seal with quench | Plan 11 + Plan 62 | Water with atmospheric solids |
| Tandem seal | Plan 52 | Medium-pressure water injection |
| Dual pressurized seal (Arrangement 3) | Plan 53B (bladder accumulator) | High-pressure water injection; seawater injection with H₂S containment; offshore platform applications |
| Dual pressurized with external flush | Plan 53B + Plan 32 | High-solids water injection |
Plan 53B with bladder accumulator is the standard dual pressurized arrangement for high-pressure water injection, providing barrier fluid pressurised above process pressure without entraining nitrogen, and eliminating emission of hazardous injection water.
Super duplex pumps for water injection are specified with Plan 53B buffer fluid seal support systems on bespoke baseplates.
Seal face materials: Silicon carbide (SiC) or tungsten carbide for abrasion resistance in seawater/particles. Elastomers: FKM (Viton) for moderate temperatures; Aflas for high-temperature water injection.
A typical water injection pumping system consists of:
Water source – Seawater intake (from platform sea chest or caisson), produced water treatment plant, or aquifer water well
Water treatment package – Filtration (media cartridge or membrane), deaeration (vacuum or nitrogen stripping), biocide dosing, oxygen scavenger injection
Seawater lift pumps – API 610 VS4 or VS6 vertical turbine pumps (if seawater source is at lower elevation from injection platform)
Booster pump – OH2 single-stage or BB3 multistage low-pressure pump (required when injection pump NPSHa margin is insufficient)
Main water injection pump – BB5 barrel multistage pump (primary high-pressure pumping unit)
Minimum flow recirculation line – Automated recirculation valve (ARC) or continuous recirculation orifice with orifice bypass line for low-flow protection of high-pressure multistage pumps during turndown operation
Injection manifold – Distributing high-pressure water to multiple injection wells across the field
Flow control valves – Regulating flow per well based on reservoir injection requirements
Injection wellheads – Downhole injection tubing packers controlling water entry into reservoir zones
In waterflood service, two types of pumps are used for high-pressure waterflood service: positive displacement (PD) and kinetic energy (centrifugal) types. Centrifugal pumps (API 610) are the most widely used type for water injection above 500 m³/h, while PD pumps may be preferred for lower flow rates or very high pressures.
Fundamental selection considerations for water injection pumps:
Anticipated injection rate and pressure (both initial waterflood and long-term field requirements)
Quality of source water (seawater, produced water, aquifer)
Corrosive constituents (chlorides, H₂S, CO₂, dissolved oxygen) determining API 610 Table H material class
NPSHa available to pump suction flange (from deaerator height, water treatment backpressure)
Continuous vs. intermittent operation duty cycle
Skid integration with water treatment package (common offshore module design)
BB5 barrel pumps for water injection are fully compliant with ANSI/API Standard 610 (ISO 13709:2009) and reflect many years of experience in the design, manufacture, quality assurance and operation of process pumps under heavy duty conditions. Key compliance requirements:
Design life: 20 years minimum
Continuous operation: Minimum 3 years uninterrupted service
Bearing life: L10 ≥25,000 hours (per API 610)
Critical speed: First lateral critical speed ≥120% of maximum operating speed
Centerline mounting: For high-temperature injection services (>80°C)
Hydrostatic testing: Pressure casing tested at 1.5x design pressure
Performance testing: Water performance test per API 610 Grade 1 or 2
Material certification: EN 10204 3.1 (full traceability)
NACE compliance (MR0175 / ISO 15156): For sour water injection service (H₂S-containing)
| Application | Details | Preferred Configuration |
|---|---|---|
| Seawater injection (onshore / offshore) | Secondary recovery offshore platforms; seawater treatment + deaeration + injection | BB5 barrel (super duplex 2507/25Cr + NACE) with Plan 53B dual seals |
| Produced water injection | Reinjecting produced water for reservoir pressure maintenance and environmental compliance; water treatment plant backpressure determines pump differential head | BB5 barrel (D-1/D-2 duplex with NACE MR0175 if H₂S present) |
| Waterflood injection | Onshore oil fields with existing waterflood patterns; injection from central water treatment plant to water injection distribution manifold across multiple well pads | BB5 barrel or BB3 axially split (material class depending on water chemistry) |
| Aquifer water injection | Pumping fresh or saline aquifer water into reservoir for EOR pressure support | BB3 axially split or OH2 single-stage (if pressure ≤50 bar) |
| Seawater lift | Lifting seawater from sea chest or caisson to water treatment package on offshore platform deck | VS4 / VS6 vertical turbine pump (super duplex construction) |
| Water injection booster | Boosting low-pressure injection water before main high-pressure pump | OH2 single-stage (duplex) |
| High pressure water injection (ESP substitute) | High-pressure water injection reservoir re-pressurization using low horsepower consumption relative to electrical submersible pumps (ESP) in waterflood operations | BB5 barrel (super duplex 2507, 20-year design) |
Shell's Malikai Tension Leg Platform (TLP), offshore Malaysia
For a fully-manned platform installed 110 km offshore Sabah, Malaysia at water depth of approximately 500 meters, custom-designed water injection pumps were supplied. Built in accordance with ISO 13709 / API 610:
Four highly engineered, variable speed drive barrel pumps (BB5) of super duplex stainless steel construction
Two multistage double case diffuser pumps supplying high-pressure deoxygenated water for well injection
Two multistage, double case volute-type pumps
Full API 610 11th/12th edition compliance (ISO 13709) – 20-year life, 3-year continuous operation
BB5 double-casing barrel construction – Superior pressure containment for high-pressure water injection up to 300 bar
Super duplex 2507 / 25Cr duplex materials – PREN >40 for seawater injection corrosion resistance
NACE MR0175 / ISO 15156 compliant materials available for produced water injection with H₂S service
Variable speed drive (VSD) compatibility – Optimized energy consumption for variable-rate waterflood injection
Over 1,000 BB5 units installed worldwide – Proven water injection track record across five continents
API 682 Plan 53B dual pressurized seals – Zero emissions bladder accumulator solution for hazardous injection
Minimum flow protection systems – ARC valve built into package or continuous recirculation for multistage pump low-flow protection
Hydrostatic test – 1.5x design pressure (BB5 outer barrel pressure test and inner casing assembly)
Performance test – Water at rated speed (Grade 1 or 2)
Mechanical run test – Minimum 4 hours continuous operation
NPSH test – Full verification if specified
Material certification – EN 10204 3.1, full traceability of all pressure-containing and wetted parts
NACE MR0175 / ISO 15156 certification – For sour service compliance (H₂S-containing injection water)
For detailed selection of the correct water injection pump configuration for your specific application – including produced water chemistry analysis (chlorides, H₂S, CO₂, O₂ scavenger residuals), hydraulic sizing (injection rate vs. reservoir pressure), material selection (API 610 Table H: C-6 carbon steel, S-8 stainless, D-1 duplex, D-2 super duplex), NPSHa verification from water treatment system backpressure, API 682 seal plan (Plan 53B for high-pressure seawater, Plan 11 for clean water), and 20-year lifecycle cost analysis – please contact our engineering team.
Email: info@hyrig.com
Our engineers support oilfield waterflood, offshore seawater injection, onshore produced water reinjection, and EOR waterflood projects worldwide with API 610 waterflood injection pumping solutions.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.