Slurry Pump – API 610 Centrifugal Pump for High-Temperature Process Applications

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 610 centrifugal slurry pump engineered for high-temperature process slurry applications. Double-walled design with outer pressure casing and replaceable erosion-resistant internal liners. Flows up to 3,409 m³/h, heads to 244 m, pressures to 83 bar, temperatures to 426°C. Repelling vanes replace traditional wear rings. Inducer option for low NPSHa. ISO 13709 / API 610 compliant.

Conatct For Details
DetailReview(0)Additional

roduct Overview

The API 610 centrifugal slurry pump is specifically engineered for demanding high-temperature process slurry applications in the oil and gas, petrochemical, and refining industries. Unlike conventional centrifugal pumps designed for clean fluids, slurry pumps must handle fluids containing suspended solids, abrasives, and erosive particles while maintaining the reliability and availability requirements of API 610 (ISO 13709) standards.

This pump combines the robust construction of API 610 heavy-duty centrifugal pumps with specialized slurry-handling features. Within API 610 classification, slurry pumps are typically configured as OH2 (overhung, centerline-mounted, single-stage) for horizontal applications, VS4 (vertical sump pumps) for pit or sump installations, or specialized lined-barrel designs such as the HPX6000 platform for extreme high-temperature slurry service.

Key Specifications (HPX6000 Slurry Pump Platform)

ParameterRange / Value
Flow rateUp to 3,409 m³/h (15,000 gpm)
HeadUp to 244 m (800 ft)
Pressure ratingUp to 83 bar (1,200 psi)
Temperature ratingUp to 426°C (800°F) – custom designs exceed this limit
Size range1" to 24" discharge
StandardISO 13709 / API 610
ConfigurationOH2 (overhung, centerline-mounted, single stage)

The HPX6000 platform represents the state of the art for API 610 slurry pumps – a fully-lined, double-walled design specifically developed for high-temperature abrasive and corrosive slurries.

API 610 Slurry Pump Configurations

Horizontal Configuration (OH2 Type)

The most common slurry pump configuration for general refinery and petrochemical service. Overhung design with impeller mounted at the shaft end, bearings housed at the drive end. Centerline mounting accommodates thermal expansion for high-temperature slurries. Repelling vanes replace traditional wear rings, eliminating an erosion-prone component.

Vertical Configuration (VS4 Type)

For sump, pit, or tank applications where horizontal pumps are not feasible. VS4 vertical pumps are fully compliant with API 610 latest edition and can be specified for hazardous open drains, space-restricted areas, or applications requiring submerged suction.

The OCV pump range is a proven API 610 VS4 sump pump series with fully compliant construction. Key features include:

  • Interchangeable cover, wear parts, and impeller with OH2 pumps – reduces spare parts inventory

  • Flows up to 750 m³/h (2,200 gpm), heads up to 280 m (880 ft), pressure up to 40 bar, temperature –46°C to 260°C

  • Discharge sizes from 50 mm to 200 mm (2" to 8")

  • Materials: API 610 S-6, S-8, A-8, D-1, D-2

  • Steam jacketed variant (OCVSF) for molten sulfur applications

For slurry applications requiring vertical installation, API 610 VS4 pumps provide the reliability of API 610 construction with slurry-specific features.

Construction – Double-Walled Lined Design

The API 610 slurry pump features a double-walled construction where the outer pressure casing contains the process pressure, and replaceable internal liners provide erosion and corrosion resistance.

Pressure Casing (Outer Shell)
The outer casing is the pressure-containing vessel designed to API 610 standards. Available in a variety of materials including carbon steel, stainless steel, CA6NM, and duplex stainless steel. The casing includes penetrations for vents and drains, all protected by renewable liners.

Replaceable Internal Liners
Mechanically fastened liners completely protect the pressure casing from erosion and abrasion. The cost of replacing renewable liners is a fraction of replacing or repairing a coated ISO/API pump pressure casing. Casing liners are available in multiple abrasion-resistant materials and surface treatments to meet any process or operational requirement.

Impeller Design (Barske-Style)
The impeller is manufactured from the same erosion-resistant material as the liners. The Barske-style impeller design with repelling vanes replaces traditional wear rings (a common erosion point). Repelling vanes on the front and rear of the impeller eliminate erosion-prone wear rings entirely. The matching volute allows the pump to operate at low flows near BEP while minimizing radial loads.

Performance Flexibility

By changing the casing liner and impeller, pump performance can be altered without modifying piping or foundations. Each pressure shell accommodates multiple hydraulic sizes, allowing field re-rating without expensive hardware changes.

Low Flow, High Head Variant (HPXM6000)
A specialized low-flow, high-head, fully-lined slurry pump for API 610 applications where high head and low flow are required – typically in high-pressure slurry injection or transfer services.

Low NPSH Option
Inducers are available for low NPSHa applications, extending the operating envelope of the slurry pump into challenging suction conditions.

Material Selection – API 610 Table H

The selection of materials for slurry pump wetted components is governed by API 610 Table H, with options ranging from low-cost carbon steel to exotic alloys depending on fluid corrosiveness and solids characteristics.

ComponentMaterial OptionsSuitability
Pressure casingCarbon steel, stainless steel (304/316), CA6NM, duplexSupports various pressure and corrosion requirements
Internal linersMultiple abrasion-resistant materials and surface treatments (proprietary alloys, ceramics, hard metals)Tailored to specific slurry abrasiveness
ImpellerSame as liner material; Barske-style with repelling vanesErosion resistance and hydraulic performance
Wear partsInterchangeable with OH2 pump types (over 10,000 OH2 pumps in field)Reduces spare parts inventory

S-8 (316L stainless steel): The most common material for corrosive slurry services where solids are not highly abrasive but corrosion resistance is required.

D-1 / D-2 (Duplex / Super Duplex): Specified for high chloride and high H₂S environments. Amarinth supplied super duplex vertical pumps for the ADNOC Bu Haseer offshore project, handling fluids with high MEG, H₂S, and chloride concentrations. The pumps were manufactured in super duplex stainless steel with sections split for shipping and assembled on site.

CA6NM (13-4 stainless steel): A hard, martensitic stainless steel offering excellent erosion resistance for highly abrasive slurry applications.

Hard Metal Liners: For extreme abrasion, fully-lined pumps with replaceable hard metal liners provide maximum service life, with the replaceable liner cost being a fraction of pressure casing replacement.

Mechanical Seals – API 682 Compliance

Slurry pump mechanical seals must withstand erosive particles, high temperatures, and potentially corrosive fluids.

Seal TypeAPI 682 ArrangementSuitability
Dual pressurized sealArrangement 3 (Type A/B)Recommended for hazardous, toxic, or abrasive slurries
Single seal with flushed chamberArrangement 1Cleaner slurries with external flush
Tandem sealArrangement 2For H₂S-containing, high-temperature slurries

Seal face materials must be selected for abrasion resistance – silicon carbide (SiC) or tungsten carbide faces are standard. Elastomers such as Viton (FKM) or Aflas are specified based on temperature and chemical compatibility.

Flush Plans for Slurry Service

PlanDescriptionApplication
Plan 32External clean fluid injectionPrevents solids from entering seal chamber
Plan 62Quench (steam or water)For high-temperature slurries, prevents solids accumulation
Plan 53BPressurized dual seal with bladder accumulatorFor hazardous, high-pressure slurry applications

Material specification note: API 610 specifies that materials for components in contact with the process fluid must be selected from API 610 Table H. For slurry pumps, this includes the casing, impeller, and all wetted parts. Mechanical seals must comply with API 682 4th edition, with seal gland plates in contact with process fluid specified to equal or higher material grade than the pump casing.

Key Applications for API 610 Slurry Pumps

IndustryApplicationSlurry Characteristics
RefiningCatalytic slurry (FCC unit) – decant oil, slurry oilHigh-temperature hydrocarbon with catalyst fines (alumina/silica)
RefiningCoke fines handlingAbrasive coke particles in water or hydrocarbon
RefiningTail gas treatment slurrySour, H₂S-laden with solids
PetrochemicalCatalyst transferAbrasive catalyst particles
Oil & Gas ProductionProduced water with sandHigh chloride, H₂S, sand
Chemical ProcessingHigh-temperature abrasive chemical slurriesCorrosive and erosive
Mining / Mineral Processing (†limited to API 610 construction)Tailings, concentratesHighly abrasive (requires lined construction)
Power GenerationLimestone slurry (FGD)Abrasive limestone particles

Benefits of API 610 Slurry Pump vs. Conventional Slurry Pumps

FeatureAPI 610 Slurry PumpConventional Slurry Pump
Design standardAPI 610 (ISO 13709) – 20-year life, 3-year continuous runNon-API (ANSI, ISO 5199, or no standard)
Bearing lifeL10 ≥25,000 hours (API 610 mandatory)Typically shorter
Centerline mountingYes – for thermal growth at high temperatures (>150°C)Rarely; foot-mounted only
Seal chamberAPI 682 compliant – accepts all seal typesRestricted seal compatibility
BaseplateHeavy-duty grouted steelLighter construction
Material traceabilityEN 10204 3.1 full certificationLimited traceability
Shaft stiffnessLarge diameters, minimal bearing spansLess robust
Critical speed120% of operating speed (API 610)Lower margins
Spare partsCommon across API 610 platforms (e.g., OH2 interchangeability)Proprietary, limited availability

API 610 Compliance Summary

The API 610 slurry pump is designed and manufactured to meet all applicable sections of API 610 11th/12th edition:

  • Design life: 20 years minimum

  • Continuous operation: Minimum 3 years uninterrupted service

  • Bearing life: L10 ≥25,000 hours

  • Critical speed: First lateral critical speed ≥120% of maximum operating speed

  • Centerline mounting: For high-temperature slurry applications (>150°C)

  • Hydrostatic testing: Pressure casing tested at 1.5x design pressure

  • Performance testing: Water performance test per API 610 Grade 1 or 2

  • Material certification: EN 10204 3.1 (full traceability)

In high-temperature applications (such as FCC slurry in refineries) where temperature exceeds 250°C, the API 610 slurry pump incorporates significant design enhancements beyond conventional slurry pumps, including raised-face flanges and higher casing class ratings.

Why Choose Our API 610 Slurry Pump

  • Full API 610 compliance – 11th/12th edition (ISO 13709), engineered for 20-year life and 3-year continuous operation

  • Double-walled lined construction – Replaceable liners protect pressure casing; replacement cost a fraction of casing repair

  • Repelling vanes – Replace erosion-prone wear rings, extending mean time between repairs (MTBR)

  • Barske-style impeller – Low flow operation near BEP with minimized radial loads

  • High-temperature capability – Up to 426°C (800°F) standard; custom designs exceed this range

  • Broad hydraulic coverage – Flows to 3,409 m³/h, heads to 244 m, pressures to 83 bar

  • Low NPSH option – Inducer available for challenging suction conditions

  • Multi-platform availability – OH2 horizontal, VS4 vertical, and low-flow/high-head variants

  • API 682 seal compatibility – All flush plans available (Plan 32, Plan 62, Plan 53B)

  • Material flexibility – Carbon steel, stainless steel, CA6NM, duplex, super duplex, and proprietary hard metal liners

  • Interchangeable parts – Wear parts common across OH2 and VS4 platforms, reducing inventory costs

  • Proven field performance – Thousands of API 610 slurry pumps installed in refineries, petrochemical plants, and production facilities worldwide

Installation and Maintenance

  • Back pull-out design (OH2 configuration) – Rotating assembly removable without disconnecting piping

  • Replaceable liners – In-field replacement without removing outer pressure casing

  • Spacer coupling – Seal and bearing maintenance without moving driver

  • Baseplate – Heavy-duty, grouted steel construction per API 610

Recommended Spare Parts

ComponentRecommended Quantity
Complete mechanical seal cartridge1 set per pump
Liner set (casing + impeller)1 set
Bearing set (radial + thrust)1 set
Gasket / O-ring kit (full set)1 set per pump
Repelling vane set (if separate from impeller)1 set

Service Intervals (Typical for Slurry Service)

  • Mechanical seal inspection: 4,000 – 8,000 hours (shorter intervals for abrasive slurries)

  • Liner inspection: Dependent on slurry abrasiveness; monitor pressure and vibration

  • Bearing inspection: 5,000 – 10,000 hours

  • Major overhaul: 12,000 – 20,000 hours (depending on service severity)

Quality Assurance and Testing (Per API 610)

  • Hydrostatic test – 1.5x design pressure

  • Performance test – Water, at rated speed (Grade 1 or 2)

  • Mechanical run test – Minimum 4 hours continuous operation

  • NPSH test – Full verification if specified

  • Material certification – EN 10204 3.1, full traceability of all pressure-containing and wetted parts

  • Non-destructive examination (NDE) – MPI, dye penetrant, radiography, or ultrasonic examination per API 610

Get a Quote or Engineering Support

For detailed selection of the correct API 610 slurry pump for your application – including hydraulic sizing, material selection (pressure casing material + liner material), wear analysis, API 682 seal plan determination (Plan 32 external flush for abrasive solids, Plan 62 quench for high temperature, or Plan 53B for hazardous service), and complete API 610 data sheet – please contact our engineering team.

Email: info@hyrig.com

*Our engineers support refinery, petrochemical, and high-temperature process projects worldwide with reliable API 610 slurry pumping solutions – from FCC decant oil to hot catalyst slurry.*


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit