API 610 OH2 Coke Grinding / Slurry Service Pump – Heavy-Duty Overhung Process Pump for Delayed Coker and Coke Slurry Applications
The API 610 Type OH2 Coke Grinding / Slurry Service Pump is an overhung, horizontal, centerline-mounted, single-stage, radially split centrifugal pump engineered specifically for severe coke handling and slurry services in refineries, including delayed coker heater charge, coke grinding unit feed, and coke slurry transfer applications. Featuring advanced wear-resistant materials and specialized hydraulic designs for solids handling, this pump provides exceptional reliability for pumping abrasive coke particles, tar, and heavy hydrocarbons. Designed and manufactured to the latest API 610 (12th Edition) standards, this pump ensures maximum reliability, extended service life, and compliance with the demanding requirements of coking processes.
Coke grinding and slurry pumps operate in one of the most abrasive and high-temperature environments in any refinery. Common challenges include:
Extreme abrasion from coke particles entrained in the slurry – standard pump materials fail rapidly.
Particle sizes ranging from fines to larger chunks requiring specialized hydraulic designs.
High operating temperatures typical in coker heater charge and coke handling services.
Risk of plugging – conventional pump designs cannot handle the solids loading and particle sizes.
Continuous critical operation – any unplanned downtime disrupts the entire coking process.
High viscosity – heavy hydrocarbons combined with solids create challenging pumping conditions.
Erosion of internal components – leading to frequent maintenance and replacement.
Low available NPSH from coker fractionator bottoms or coke slurry tanks.
The API 610 OH2 Coke Grinding / Slurry Service Pump, with its wear-resistant features and solids-handling hydraulic design, is the proven solution specifically engineered for these extreme coker service conditions.
1. Full Compliance with API 610 (12th Edition)
Designed, manufactured, and tested to the stringent requirements of API 610 12th Edition (ISO 13709).
Centerline-mounted casing ensures thermal expansion remains concentric, maintaining alignment during high-temperature operation.
Full documentation and traceability for all critical components.
2. Solids-Handling Hydraulic Design
Specially designed flow passages accommodate coke particles without plugging.
Available in both enclosed and open impeller configurations depending on solids characteristics.
Open impeller option provides maximum clearance for large particle handling.
Generous internal clearances reduce risk of solids jamming.
Optimized for high-concentration coke slurry handling.
3. Wear-Resistant Materials and Coatings
Available with hardened materials including high-chrome iron for maximum abrasion resistance.
Optional SUME (Slurry Ultra-resistant Metal-lized Epoxy) coating for extended wear life.
Replaceable wear rings and liners designed for easy field replacement.
Thick cross-sections in wear areas for long service life.
4. High-Temperature Capability
Engineered for continuous operation at temperatures up to 425°C (800°F).
Centerline mounting maintains alignment during thermal expansion.
Finned bearing housing and fan cooling for extended bearing life at high temperatures.
Optional water-cooled bearing housings for extreme temperature applications.
5. Rigid Shaft for Minimal Deflection
Heavy-duty shaft design with deflection far below API 610 limits.
First critical speed well above operating speed range for smooth, vibration-free operation.
Minimal shaft deflection provides ideal conditions for mechanical seal reliability in abrasive service.
6. Heavy-Duty Bearing Systems
Large-capacity oil-lubricated bearings handle high radial loads from slurry operation.
Available lubrication options include oil ring, splash oil, purge mist, or pure oil mist.
Bearing life calculated for minimum 25,000 hours continuous operation.
Bearing isolators protect against contamination from coke dust and environment.
7. Enhanced Mechanical Seal Environment
API 682 compliant seal chambers for cartridge-type mechanical seals.
Rigid shaft and minimal deflection extend mechanical seal life.
Accepts various API 682 seal plans specifically designed for abrasive coke slurry service.
Optional clean water flush systems (API 682 Plan 32) to protect seal faces.
Abrasion-resistant shaft sleeve protects shaft at seal area – hardened or coated for maximum life.
8. Robust Casing Design
Casings designed for 2x API 610 nozzle loads, ensuring freedom from piping distortions.
300# or 600# flange ratings standard for high-pressure coker service.
Thick cross-sections in wear areas for extended service life.
Jacketed casings available for heated services.
9. Reduced Radial Loads
Double-volute casing design minimizes hydraulic radial forces.
Extends bearing and mechanical seal life in abrasive service.
Reduces shaft deflection and improves reliability.
10. Wide Performance Range
Capacities suitable for coke grinding and slurry applications.
Heads up to 360 meters (1,200 feet).
Pressures up to 75 bar (1,100 psi) with higher options available.
Multiple hydraulic coverages for optimal fit to duty.
11. Ease of Maintenance
Back pull-out design allows rotor removal without disturbing piping or driver.
Replaceable wear components designed for rapid field replacement.
Standardized components simplify spare parts inventory.
12. Material Options for Coke Service
Available in carbon steel, chrome-moly alloys, and high-chrome iron.
Material selection based on operating temperature, solids concentration, and particle characteristics.
NACE compliant options for sour service applications where applicable.
Operational Reliability
Continuous, trouble-free operation in the most demanding coker services.
Eliminates unplanned shutdowns that disrupt the entire coking process.
Confidence that pumps will run reliably between scheduled turnarounds.
Coke Handling Capability
Specialized hydraulic design handles coke particles that would plug conventional pumps.
Reliable performance with varying solids loading and particle sizes.
Maintains stable operation in the most challenging coke slurry applications.
Extended Service Life
Wear-resistant materials and coatings extend pump life in abrasive coke service.
Reduced frequency of wet-end component replacement.
Fewer unplanned outages for maintenance.
Reduced Maintenance
Wear-resistant features reduce erosion-related failures.
Minimal shaft deflection extends seal and bearing life.
Back pull-out design reduces maintenance time.
Lower maintenance costs over pump life.
Process Stability
Reliable coke slurry transport ensures consistent feed to coker units.
Prevents costly production interruptions.
Stable operation under varying feed conditions and particle sizes.
Lower Total Cost of Ownership
Extended component life reduces replacement part costs.
High efficiency reduces energy consumption.
Reduced maintenance frequency lowers operating expenses.
Best economic value for coke slurry pumping.
Peace of Mind
Plant management confidence in coker unit reliability.
Operations team trust in equipment performance.
Maintenance team appreciation for serviceability and extended wear life.
Delayed Coker Services
Coker heater charge pumps (smaller capacity applications)
Coke slurry transfer pumps
Coke grinding unit feed pumps
Quench water / coke handling pumps
Coke fines transfer
Refinery Heavy Oil Services
Thermal cracking unit feed
Visbreaker bottoms
Heavy residue transfer with coke particles
Vacuum tower bottoms with entrained coke
Slurry Services
Coke fines handling
Petroleum coke slurry transport
Heavy hydrocarbon slurry transfer
Catalyst fines handling (similar abrasive characteristics)
Other Abrasive Applications
Similar services requiring solids handling capability
Process applications with abrasive particles
Decades of proven performance in delayed coker units and coke handling services worldwide.
Solids-handling expertise – specialized hydraulic designs for abrasive coke slurry applications.
Wear protection technology – hardened materials and SUME coating for maximum abrasion resistance.
Custom engineered for your specific operating conditions (flow, head, temperature, particle size, solids concentration).
Global reference list – thousands of pumps operating reliably in coke and slurry service.
Lifecycle support – genuine OEM parts, recoating services, and engineering support for the entire pump life.
More Sulzer API 610 Pumps:
API 610 BB2 GSG Cooling Water Circulation Pump – Heavy-Duty Double-Suction Centrifugal Pump for Large-Volume Cooling Water Services
API 610 BB2 GSG Boiler Feed Water Pump – Heavy-Duty Multistage Barrel Pump for High-Pressure Boiler Feed Services
API 610 BB2 GSG Power Plant Circulation Pump – Heavy-Duty Multistage Barrel Pump for High-Pressure Power Generation Services
API 610 OH2 Coke Grinding / Slurry Service Pump – Heavy-Duty Overhung Process Pump for Delayed Coker and Coke Slurry Applications
API 610 OH2 Abrasive / Oil Sands Service Pump – Heavy-Duty Overhung Process Pump for Severe Abrasive Slurry and Oil Sands Applications
API 610 OH2 Low-Flow High-Head Pump – Specialized Overhung Process Pump for Low Capacity, High Pressure Services
API 610 OH2 Boiler Auxiliary / Boiler Feed Pump – Heavy-Duty Overhung Process Pump for Boiler Feed Water and Auxiliary Services
API 610 OH2 Seawater Boosting Pump – Heavy-Duty Overhung Process Pump for Seawater Lifting and Pressure Boosting Services
API 610 OH2 Amine / Desulfurization Solution Circulation Pump – Heavy-Duty Overhung Process Pump for Gas Treating and Sulfur Recovery Services
API 610 OH2 High Temperature Process Pump – Heavy-Duty Overhung Process Pump for High-Temperature Refinery and Petrochemical Services
API 610 OH2 LVGO / HVGO Transfer Pump – Heavy-Duty Overhung Process Pump for High-Temperature Vacuum Gas Oil Services
API 610 OH2 Light Hydrocarbon / Diesel / Naphtha Transfer Pump – Heavy-Duty Overhung Process Pump for Volatile and Medium Distillate Services
API 610 OH2 Low Pressure Charge Pump – Heavy-Duty Overhung Process Pump for Low Suction Pressure Refinery Charge Services
API 610 OH2 Fractionator Bottom / Slurry Pump – Heavy-Duty Overhung Process Pump for High-Temperature Slurry Services
API 610 OH2 Atmospheric / Vacuum Tower Bottom Pump – Heavy-Duty Overhung Process Pump for High-Temperature Refinery Services
API 610 BB2 Oil Sands Pump (with SUME Coating) – Heavy-Duty Centrifugal Pump for Severe Oil Sands Slurry Service
API 610 BB2 Power Plant Cooling Water Pump – Heavy-Duty Centrifugal Pump for Circulating Water Service
API 610 BB2 Seawater Transfer Pump – Heavy-Duty Centrifugal Pump for Large-Volume Seawater Handling
API 610 BB2 SWRO High Pressure Boosting Pump – Heavy-Duty Centrifugal Pump for Seawater Reverse Osmosis Membrane Feed Services
API 610 BB2 Critical Service Pump – Ultimate Reliability Centrifugal Pump for Most Demanding Refinery Applications
API 610 BB2 Amine / Carbonate Circulation Pump – Heavy-Duty Centrifugal Pump for Gas Treating and Acid Gas Removal Services
API 610 BB2 High Temperature Process Pump – Heavy-Duty Centrifugal Pump for High-Temperature Refinery Services
API 610 BB2 Boiler Feed Water Boosting Pump – Reliable High-Pressure Centrifugal Pump for Boiler Feed Water Boosting Services
API 610 BB2 Light Hydrocarbon / Diesel Transfer Pump – Reliable Refinery Centrifugal Pump for Volatile & Medium Distillate Services
API 610 BB2 Low Pressure Charge Pump – Heavy-Duty Refinery Centrifugal Pump for Low Suction Pressure Charge Services
API 610 BB2 Fractionator Bottom Pump – Heavy-Duty Refinery Centrifugal Pump for FCC & Coker Fractionator Service