Filter Mother Liquor Tank / Underground Tank / Emergency Pit Vertical Sump Pump – Heavy Soda Service – API 610 VS4/VS5 Vertical Suspended Pump by Leading China 610 Pump Manufacturer

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 610 VS4/VS5 vertical sump pump (vertical suspended, single or multistage) designed for pumping corrosive mother liquor from filter mother liquor tanks, underground storage tanks, and emergency spill pits in heavy soda ash production. Flow 20‑200 m³/h, head 20‑60 m. All wetted parts in 316L stainless steel. Submerged suction eliminates priming and NPSH issues. Manufactured by a certified China API 610 pump manufacturer. VS4 (wet pit) and VS5 (closed sump) configurations available. Back pull‑out design. 20‑year design life, 3‑year continuous operation.

Conatct For Details
DetailReview(0)Additional

Product Overview

The vertical sump pump (VS4 / VS5) is specifically designed for pumping corrosive, solids‑laden mother liquor from filter mother liquor tanks, underground storage tanks, and emergency spill pits in soda ash production plants (ammonia‑soda / Hou`s process). These applications typically involve:

  • Filter mother liquor tanks – Collecting filtrate from bicarbonate filters after washing, containing mother liquor with fine crystal carryover.

  • Underground tanks – Below‑grade storage of heavy soda mother liquor, requiring a pump with excellent suction lift characteristics.

  • Emergency pits / spill containment – Collecting accidental spills or leaks of mother liquor, where the pump must run intermittently and self‑prime or operate submerged.

The fluid handled is corrosive mother liquor containing chlorides (NaCl, NH₄Cl), carbonates, ammonia, and fine suspended solids (bicarbonate crystals, carbonate fines, salt particles). The pump must operate reliably even with limited NPSH (submerged suction) and must not require manual priming.

The pump is classified under API 610 (ISO 13709) as Type VS4 (wet pit sump) or VS5 (closed sump/barrel). These are vertically suspended, single‑stage or multistage, diffuser‑type or volute‑type pumps with the pump end submerged in the liquid and the motor mounted above grade on a discharge head. The vertical design eliminates priming concerns (the impeller is always submerged) and provides inherent low NPSH.

This pump is manufactured by a leading China API 610 pump manufacturer with full API Q1 certification, extensive experience in soda ash and heavy chemical services, and thousands of vertical sump pumps installed globally.

Construction & API 610 Classification

FeatureVS4 (Wet Pit)VS5 (Closed Sump / Can)
API 610 TypeVS4 – vertical suspended, wet pit, single or multistageVS5 – vertical suspended, closed sump (barrel), single or multistage
SuctionOpen suction bell, submerged in tank/pitSuction pipe from closed vessel or can
Casing formDiffuser or volute typeDiffuser or volute type
Motor mountingDischarge head above gradeDischarge head above grade
Pump columnSuspended from discharge head, length customised to pit depthSuspended from discharge head, enclosed in outer barrel
Number of stagesSingle‑stage (typical) or multistage (for higher head)Single‑stage or multistage

Why VS4/VS5 for Filter Mother Liquor, Underground Tanks & Emergency Pits

  • No priming required – The pump impeller is always submerged in the liquid (for tanks with sufficient liquid level) or installed in a can that maintains a flooded suction. This is critical for emergency pits that may be dry for long periods and then need to start instantly.

  • Excellent low NPSH – The vertical column of liquid above the impeller provides positive NPSH even with low tank levels.

  • Corrosion‑resistant construction – 316L stainless steel wetted parts resist chlorides and ammonia.

  • Space‑saving design – The pump is installed directly in the tank or pit, requiring no separate pump house foundation.

  • Easy maintenance – The entire rotating assembly (column, shaft, impeller, bearings) can be withdrawn upward from the discharge head without draining the tank or pit.

  • VS5 closed sump option – For underground tanks requiring a sealed suction line or for applications with very low liquid levels, the VS5 can (barrel) maintains a flooded suction even when the external pit is nearly empty.

Key Technical Specifications (Mother Liquor Sump Duty)

ParameterDesign Range
Flow rate20 – 200 m³/h (90 – 880 GPM)
Head20 – 60 m (65 – 195 ft)
Fluid temperature40 – 80°C (104 – 176°F)
Solids content≤5% fine suspended crystals (bicarbonate, carbonate fines)
pH range7 – 10 (ammoniacal brine)
Maximum column lengthUp to 6 m (customisable, longer on request)
Material316L stainless steel (wetted parts)
Speed1,450 / 2,900 rpm (50Hz) or 1,750 / 3,500 rpm (60Hz)
NPSHrVery low (submerged suction) – typically ≤2 m
Design life20 years minimum

Materials – 316L Stainless Steel for Corrosion Resistance

Mother liquor in soda ash production contains chlorides (NaCl, NH₄Cl), ammonia, carbonates, and water. 316L stainless steel is the recommended material for its excellent resistance to pitting and crevice corrosion in these environments.

ComponentMaterialAPI 610 Class
Discharge head316L stainless steel or carbon steel with 316L claddingS‑8 / C‑6 with clad
Pump column / discharge pipe316L stainless steelS‑8
Diffuser / casing bowls316L stainless steel (CF3M)S‑8
Impeller316L stainless steelS‑8
Shaft316 stainless steel (AISI 316)A‑8
Line shaft bearingsSilicon carbide or PTFE‑impregnated bronze–
Thrust bearing (in discharge head)Heavy‑duty angular contact ball bearing–
Fasteners316 stainless steel–
Gaskets / O‑ringsPTFE or Viton (FKM)–

316L stainless steel contains molybdenum (2‑3%) which significantly improves resistance to chloride pitting (PREN 25‑30). This is essential for long service life in soda ash mother liquor.

Mechanical Seals & Shaft Sealing

For VS4/VS5 vertical sump pumps, the mechanical seal or stuffing box is located in the discharge head above grade, not submerged in the liquid. This simplifies maintenance and allows the seal to operate in a clean, non‑submerged environment.

Seal ArrangementAPI 682 PlanSuitability
Single cartridge mechanical sealPlan 11 (self‑flush from pump discharge)Clean mother liquor with low solids – acceptable
Single seal with external flushPlan 32Recommended for mother liquor containing fine solids – clean external flush prevents solids from reaching seal faces
Dual pressurised seal (Arrangement 3)Plan 53BFor toxic ammonia service (high NH₃ concentration) – zero emissions

Seal faces: Silicon carbide vs. carbon (standard) or silicon carbide vs. silicon carbide (for abrasive mother liquor).
Elastomers: Viton (FKM) or PTFE – resistant to ammonia and chlorides.

For pumps that operate intermittently (emergency pits) with long idle periods, a static sealing arrangement (e.g., graphite packing with lantern ring) may be used instead of a mechanical seal, as it tolerates dry starts better.

Special Considerations for Each Application

Filter Mother Liquor Tank

  • Continuous duty, moderate solids (2‑5%). The pump typically runs 24/7.

  • Recommend Plan 32 external flush to keep seal faces clean.

  • Consider a strainer on the suction bell to prevent large crystals from entering.

Underground Tank

  • Suction is from below grade. Pump column length must be specified correctly to ensure suction bell is below minimum liquid level.

  • NPSH is adequate due to liquid column height. No inducer required.

  • Tank may be unvented (sealed) – ensure the discharge head includes a vent connection.

Emergency Pit / Spill Containment

  • Intermittent duty; pump may sit for months without operation.

  • Vertical sump pump is ideal because no priming is required when emergency starts.

  • Recommend gland packing (instead of mechanical seal) for better tolerance of dry starts.

  • Install a low‑level cutout switch to prevent the pump from running dry after pit is emptied.

Why Choose a VS4/VS5 Vertical Sump Pump from This China 610 Manufacturer

  • API 610 full compliance (VS4/VS5) – 11th/12th edition ISO 13709, 20‑year design life, 3‑year continuous operation.

  • 316L stainless steel wetted parts – Excellent corrosion resistance to chloride‑rich mother liquor.

  • Submerged suction – No priming required, inherent low NPSH, ideal for below‑grade tanks and pits.

  • Wide hydraulic range – Flow 20‑200 m³/h, head 20‑60 m, covering all tank / pit sump duties.

  • Custom column lengths – Pump column manufactured to match your tank depth (up to 6 m standard, longer on request).

  • Easy maintenance – Withdrawable rotating assembly; no need to drain tank or pit for seal/impeller inspection.

  • Seal flexibility – Plan 11, Plan 32, or Plan 53B; also gland packing for intermittent duty.

  • Space‑saving – Directly installed in tank, no separate foundation or pump house required.

  • Certified China manufacturer – API Q1, ISO 9001, with global references in soda ash and heavy chemical industries.

  • Proven in heavy soda service – Thousands of vertical sump pumps operating in filter mother liquor tanks, underground storage, and emergency pits worldwide.

API 610 Compliance Highlights

  • Design life: 20 years minimum

  • Continuous operation: ≥3 years uninterrupted (for VS4/VS5 in mother liquor tank duty)

  • Thrust bearing L10 life: ≥25,000 hours

  • Critical speed: ≥120% of maximum operating speed

  • Hydrostatic test: Discharge head and column at 1.5× design pressure

  • Performance test: Water per API 610 Grade 2 (Grade 1 optional)

  • Material certification: EN 10204 3.1 for all wetted parts

  • NACE MR0175 available on request

Quality Assurance & Testing (Per API 610)

  • Hydrostatic test – Discharge head and column tested at 1.5× MAWP.

  • Performance test – Water at rated speed per API 610 Grade 2.

  • Mechanical run test – 4 hours minimum; vibration and bearing temperature recorded.

  • Impeller dynamic balancing – Grade G6.3 or better.

  • Material certification – EN 10204 3.1 for 316L components; PMI available.

  • NDE – Dye penetrant on castings; ultrasonic on shafts as required.

Recommended Spare Parts (Per Pump)

ComponentRecommended Quantity
Mechanical seal cartridge (Plan 32 ready) or gland packing set1 set
Line shaft bearing set (every 1‑2 metres of column)1 set per column section
Thrust bearing set (discharge head)1 set
Impeller1
Shaft (for critical duty)1
Gasket / O‑ring kit (full set)1 set

Get a Quote or Engineering Support

For a detailed selection of the API 610 VS4/VS5 vertical sump pump for your filter mother liquor tank, underground tank, or emergency pit in heavy soda service – including flow, head, tank depth and configuration, fluid composition (chlorides, solids), intermittent or continuous duty, and material (316L stainless steel) – please contact our engineering team.

Email: info@hyrig.com

*Our API 610 VS4/VS5 vertical sump pumps are specifically engineered for heavy soda mother liquor tank and pit service – 316L stainless steel, submerged suction, no priming, low NPSH, and easy maintainability. Manufactured by a leading China API 610 pump manufacturer, API Q1 certified, with custom column lengths to fit your underground tanks and emergency pits.*


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit