HYRIG OH2 Lean Amine Circulation Pump – API 610 Horizontal Overhung Centrifugal Pump for Large Flow Amine Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
HYRIG OH2 Lean Amine Circulation Pump: API 610 horizontal overhung, centerline mounted design for high capacity amine circulation. Flow 100-3000 m³/h, head 30-150 m, temp up to 100°C, design pressure up to 20 bar. Handles MDEA, DEA, MEA in circulation loops. Back pull-out for easy maintenance, API 682 mechanical seal (Plan 11+62 or Plan 53B), 316L corrosion resistant trim.

Conatct For Details
DetailReview(0)Additional

Product Overview
The HYRIG OH2 Lean Amine Circulation Pump is a heavy-duty, horizontal, single-stage overhung centrifugal pump, fully compliant with API 610 (ISO 13709) standards. Specifically engineered for large flow, medium to low pressure amine circulation – including amine recirculation in absorber columns, lean amine return loops, and interstage transfer in gas sweetening, refinery tail gas treating, and carbon capture units – this pump features a centerline mounted support and back pull-out design.

With flows up to 3000 m³/h and heads ranging from 30 to 150 meters, the OH2 configuration is ideal for high capacity, relatively low differential pressure services where reliability and easy maintenance are essential. The overhung design simplifies seal and bearing access, while the heavy duty shaft and bearing housing ensure continuous, vibration-free operation.

Key Technical Parameters

  • Pump Type: API 610 OH2 Horizontal Overhung Centrifugal Pump

  • Flow Range: 100 – 3000 m³/h

  • Head Range: 30 – 150 m (higher with two-stage OH2 variant upon request)

  • Working Temperature: Up to 100°C (typical amine operating range 40–80°C)

  • Design Pressure: Up to 20 bar

  • Structure: Centerline mounted casing, back pull-out design, single or double volute for large flows

  • Seal Standard: API 682 mechanical seal – typically Plan 11 (recirculation) + Plan 62 (quench) for standard service, or Plan 53B (pressurized dual seal) for zero emissions.

  • Materials: 316L stainless steel wetted parts (impeller, wear rings, shaft sleeve) with carbon steel casing (WCB) and 316L trim; full 316L casing available for highly corrosive amine (heat stable salts). NACE MR0175 optional.

  • Application: Lean amine circulation pump (absorber bottom to top recirculation or regenerator return); amine transfer between vessels; large scale gas sweetening, CO₂ capture, and biogas upgrading processes.

Technical Challenges & Solutions for High Flow Amine Circulation

ChallengeHYRIG OH2 Solution
Large flow at moderate headOptimized single-stage hydraulics with double volute casing to reduce radial thrust and extend bearing life
Low NPSH from absorber bottomLarge eye impeller design; optional inducer for extremely low NPSH conditions
Seal leakage and emissionsAPI 682 Plan 53B dual pressurized seal with compatible barrier fluid – zero fugitive emissions
Corrosion from heat stable salts (HSS)316L impeller, wear rings, and shaft sleeve; full 316L casing option for aggressive lean amine loops
Continuous 24/7 operationHeavy duty bearing housing with large oil capacity; optional oil mist lubrication; vibration monitors integrated
Easy maintenance without piping disturbanceBack pull-out design – rotating element, bearings, and seal can be removed while casing remains in line

Case Study Snapshot – Large Natural Gas Sweetening Plant, Southeast Asia

  • Application: Lean MDEA recirculation pump in absorber loop. Flow 2100 m³/h, head 85 m.

  • HYRIG OH2 solution: Single stage, double volute casing, 316L internal trim, Plan 53B dual seal.

  • Results after 2 years:

    • Zero seal leakage

    • Vibration <2.0 mm/s at all operating points

    • Bearing temperatures within 10°C of ambient

    • No unscheduled maintenance

  • Full case study available upon request.

Key Features for Reliable Amine Circulation

  • API 610 OH2 Compliance – Built for heavy duty continuous service in gas processing plants.

  • High Flow Capacity – Up to 3000 m³/h in a single pump, reducing the number of parallel units needed.

  • Centerline Mounting – Maintains alignment during temperature changes and ensures stable operation over the entire flow range.

  • Back Pull-Out Design – Rotor, bearings, and mechanical seal can be removed without disturbing piping or motor foundation – typical seal change in 2-3 hours.

  • Low NPSH Performance – First stage impeller optimized for low suction head; inducer option extends operating range of flooded or tower bottom suction.

  • Zero Emissions Sealing – API 682 Plan 53B pressurized dual seal with barrier fluid reservoir and accumulator; compatible with amine systems.

  • Corrosion & Erosion Control – 316L impeller and wear rings standard; hardened stellited wear rings for abrasive conditions (e.g., amine with suspended solids).

  • Heavy Duty Bearings – Oversized angular contact ball bearings or tilting pad thrust bearings, oil bath or oil mist lubrication, temperature and vibration monitoring provisions.

  • High Efficiency Hydraulics – CFD optimized impeller and volute deliver up to 88% efficiency, reducing power consumption at high flow rates.

  • Maintenance Simplicity – Casing stays in line; seal and bearing replacement performed from the drive end without special tooling.

Typical Applications

  • Lean amine recirculation loop in gas sweetening (absorber bottom back to top, or to regenerator return line)

  • Amine transfer between storage and process vessels

  • Interstage circulation in large carbon capture systems (post‑combustion)

  • Amine supply to multiple absorber trains from a common header

  • Biogas upgrading units (CO₂ removal with amine wash)

  • Refinery tail gas treating unit (TGTU) lean amine circulation at moderate head

Why HYRIG OH2 for Lean Amine Circulation?

HYRIG OH2 pumps are purpose-engineered for the specific demands of high flow, low to medium head amine circulation. The combination of API 610 reliability, back pull-out maintainability, 316L corrosion protection, and API 682 sealing ensures long service life with minimal downtime. Key advantages include:

  • Lower installed cost compared to between-bearing designs for the same flow range

  • Simpler maintenance – no need to remove casing or piping for seal/bearing replacement

  • Proven performance in hundreds of amine service installations worldwide

  • Full documentation – API datasheets, CAD models, material certificates, and performance curves available

Download Resources

Request the following from our technical team:

  • OH2 Lean Amine Circulation Pump Selection Guide (PDF) – includes head/flow curves for various impeller diameters

  • API 682 Seal Plan Recommendation for Amine Service – decision matrix for Plan 11+62 vs Plan 53B

  • Case Study Pack – 5 real OH2 amine pump installations with operating data

  • 3D CAD model (STEP) for plant integration

  • API 610 Datasheet template (Excel)

Contact: info@hyrig.com – subject line “OH2 Amine Circulation Inquiry”

Contact Us

For technical quotation, size selection, or to discuss your large flow amine circulation requirements, please email us at: info@hyrig.com

Our engineering team will respond within 24 hours with a pump selection optimized for your amine type, flow rate, head, NPSH, and process conditions.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit