The Rich Amine Regenerator Bottom Pump is designed for specialized applications where a liquid stream containing significant residual H₂S and CO₂ is withdrawn from the bottom of a regenerator (stripper) column. In conventional amine sweetening, rich amine enters the top of the regenerator and is stripped of acid gases, exiting the bottom as lean amine. However, certain process configurations – such as split‑flow regeneration, partial stripping, side‑draw reboilers, or stripper bottoms recycle – may require a pump at the regenerator base that handles a fluid with higher H₂S loading than typical lean amine. This pump is engineered for those demanding duties where the column bottom liquid is still corrosive, potentially sour, and hot.
All pumps are fully compliant with API 610 11th/12th edition (ISO 13709) standards – ensuring a 20‑year design life and minimum 3‑year uninterrupted operation. Available in OH2 (single‑stage overhung), BB3 (multistage between bearings), and VS4 (vertical sump) configurations, the pump is built to withstand the most severe amine service conditions with absolute emissions containment.
| Pump Type | Configuration | Best Application |
|---|---|---|
| OH2 (Preferred) | Overhung, centreline‑mounted, single‑stage | Transfer of regenerator base liquid (heads ≤150 m, flows 10–600 m³/h) |
| BB3 | Axially split, multistage, between bearings | High‑head transfer (>150 m) where base liquid must be pumped to elevated equipment |
| VS4 | Vertical suspended sump / can type | Low NPSHa at column base; space‑constrained or fire‑code installations |
| Parameter | OH2 | BB3 | VS4 |
|---|---|---|---|
| Flow range | 10 – 600 m³/h | 50 – 1500 m³/h | 10 – 750 m³/h |
| Head range | 20 – 260 m | 100 – 1500 m | 15 – 280 m |
| Pressure rating | Up to 64 bar | Up to 150 bar | Up to 40 bar |
| Temperature | –45 to +200°C | –45 to +200°C | –46 to +260°C |
| Speed | 1,450 / 2,950 rpm | 1,450 / 2,950 rpm | 1,450 / 2,950 rpm |
The fluid may be highly corrosive (residual H₂S, CO₂, heat‑stable salts, possibly chlorides). 316L stainless steel (API 610 Class S‑8) is the minimum. Carbon steel is not acceptable.
| Component | Material (Standard) | Upgrade Option |
|---|---|---|
| Casing | 316L SS (CF3M) | Duplex (D‑1/D‑2), Super Duplex (U‑8) |
| Impeller | 316L SS | Duplex, Super Duplex, 17‑4 PH |
| Shaft | 316 SS or 4140 with coating | 17‑4 PH, Duplex SS |
| Wear rings | 316L SS + Stellite hard‑facing | Tungsten carbide |
| Gaskets / O‑rings | Spiral wound (graphite) / FKM | Aflas for higher temperatures |
For fluids with H₂S partial pressure above NACE limits, NACE MR0175 / ISO 15156 certification is required.
Because the fluid contains H₂S, dual pressurised seals are mandatory. API 682 Arrangement 3 with Plan 53B (bladder accumulator) provides zero emissions and absolute containment.
| Seal Arrangement | API 682 Plan | Application |
|---|---|---|
| Dual pressurised (Arr. 3) | Plan 53B | Mandatory – zero H₂S emissions, barrier fluid pressure > process |
| Tandem seal (Arr. 2) | Plan 52 | Not recommended for H₂S service |
| Single seal (Arr. 1) | Plan 11 / 21 | Not permitted |
Plan 53B uses a bladder accumulator to maintain barrier fluid pressure above process pressure. Seal faces: silicon carbide (SiC) / SiC. Elastomers: FKM for up to 120°C; Aflas for higher temperatures.
Column base pressure is typically near atmospheric; liquid level may be limited. The fluid is hot and contains dissolved gases. Low NPSH is a common challenge. Use low‑NPSHr impellers or inducers, and maintain NPSHa ≥ NPSHr + 1.0 m.
An automatic recirculation valve (ARC) or continuous bypass with orifice must protect the pump if the main discharge valve closes.
| Application | Description |
|---|---|
| Split‑flow regeneration | Partially stripped amine is withdrawn from regenerator base to a second stripper section |
| Side‑draw reboiler circulation | Pumping regenerator base liquid through an external reboiler |
| Stripper bottoms recycle | Returning base liquid to an upstream section of the regenerator |
| High H₂S lean amine service | When lean amine still exceeds typical H₂S concentrations |
| Sour water stripper bottoms | Stripped sour water with residual H₂S |
Design life: 20 years minimum
Continuous operation: Minimum 3 years uninterrupted service
Bearing life: L10 ≥25,000 hours
Critical speed: ≥120% of maximum operating speed
Centreline mounting (OH2/BB3): Essential for hot service
Hydrostatic test: 1.5x design pressure
Performance test: Water per API 610 Grade 1 or 2
Material certification: EN 10204 3.1 full traceability
NACE MR0175 / ISO 15156 available for sour service
Full API 610 compliance (OH2 / BB3 / VS4) – 11th/12th edition ISO 13709, 20‑year life
316L stainless steel (S‑8) as standard – proven resistance to sour, hot amine
API 682 Plan 53B dual pressurised seals – zero H₂S emissions, mandatory for safety
Broad hydraulic coverage – flows 10–1500 m³/h, heads 20–1500 m
Low NPSH designs – inducer option for challenging column base NPSHa
Centreline mounting – maintains alignment through thermal cycling
Easy maintenance – back pull‑out (OH2), axial split (BB3), vertical withdrawable (VS4)
Minimum flow protection integrated
NACE MR0175 / ISO 15156 compliant options
Engineered for specialized regenerator bottom services requiring high corrosion resistance
| Component | Recommended Quantity |
|---|---|
| Mechanical seal cartridge (API 682 Plan 53B ready) | 1 set |
| Bearing set (radial + thrust) | 1 set |
| Wear ring set (casing + impeller) | 1 set |
| Gasket / O‑ring kit (full set) | 1 set |
| Inducer (if fitted) | 1 set |
For selection of the correct Rich Amine Regenerator Bottom Pump for your specialized amine regeneration process – including column bottom fluid composition, H₂S residual, temperature, NPSHa, material selection (316L SS, duplex, or NACE MR0175), API 682 seal plan (Plan 53B), and complete API 610 data sheet – please contact our engineering team.
Email: info@hyrig.com
Our engineers support unconventional amine regeneration, split‑flow stripping, and high‑sour service projects worldwide with reliable API 610 regenerator bottom pumps – engineered for rich or semi‑rich amine withdrawal from stripper base.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.