The VS2 pump is an API 610 vertical can-type multistage centrifugal pump, designed with a barrel (can) casing that is installed on a tank top or foundation, with the suction inlet submerged into the vessel liquid. This configuration provides excellent low NPSH performance while enabling high-pressure multistage operation. The VS2 is widely used in refineries, petrochemical plants, power generation, and chemical industries for critical applications requiring high head and low available suction pressure.
Key Design Features
API 610 VS2 Vertical Can-Type Multistage – Fully compliant with API 610 (latest edition) for heavy-duty continuous process service. The can/barrel casing contains the multistage pump assembly and maintains a flooded suction condition.
Can / Barrel Casing Design, Optimized for Low NPSH – The pump sits inside a vertical can (barrel) that is submerged in or connected to the suction vessel. This ensures a flooded suction with minimal NPSH requirement, ideal for boiling point liquids, light hydrocarbons, and hot condensate.
Multistage Impeller Structure for Ultra High Head – Multiple stages (2 to 12+) generate heads up to 1,500+ meters without requiring excessive speed or large diameter impellers. Perfect for high-pressure process feeding.
Vertical Compact Layout, Save Plant Footprint – The vertical can-type design occupies minimal ground space compared to horizontal multistage pumps. The motor is mounted on top, with the pump extending downward into the can.
Cartridge Rotor, Easy Maintenance – The entire rotating assembly (impellers, shaft, bearings, wear rings) is a cartridge that can be removed vertically for maintenance without disturbing the can casing or piping.
Suitable for High Temperature, High Pressure and Corrosive Media – Alloy materials (316L, duplex, carbon steel) and high-temperature designs allow service up to 400°C and pressures to 100+ bar.
Liquid Lubricated Bearings, Stable 24/7 Continuous Operation – Internal bearings are lubricated by the pumped fluid, eliminating external oil systems and reducing maintenance.
Typical Performance Range
Flow: up to 1,200 m³/h (5,280 GPM)
Head: up to 1,500 m (4,920 ft) – multistage
Temperature: -40°C to +400°C (-40°F to +752°F)
Pressure: up to 100+ bar (1,450+ psi)
Can length: custom, matched to installation
Material Options
Casing/can: Carbon steel, 316L, duplex, alloy steel
Impeller: 316L, duplex, high-chrome, 17-4PH
Shaft: Forged alloy steel, 316L, duplex
Internal bearings: PTFE, carbon, silicon carbide
Main Applications
Refinery hydrocarbon feed – Pumping low NPSH feed streams to hydrotreaters, reformers, and fractionators.
Petrochemical reactor feed – Feeding high pressure reactors with light hydrocarbons, solvents, or process liquids.
Power plant condensate pumping – Boosting hot condensate from low-pressure hotwells to deaerators (low NPSH critical).
Low NPSH process boosting – Any application where suction pressure is limited but discharge pressure must be high.
Tank top high-pressure multistage pumping – Mounted directly on tank nozzle to pump high head without external suction piping.
Why Choose Our VS2 Pump?
Lowest NPSH among multistage pumps – Can-type flooded suction design.
High head with compact footprint – Multistage vertical saves space.
Easy maintenance – Cartridge rotor pulls out from top.
API 610 reliability – Designed for critical continuous service.
Get Your VS2 Pump Technical Package
We provide free:
VS2 datasheet (API 610 format)
Performance curve (head, efficiency, NPSHr)
CAD drawing (2D can installation drawing, PDF/DWG)
3D model (STEP/IGES)
Factory direct quotation (EXW / FOB / CIF)
How to Request?
Send us your operating conditions:
Flow rate (m³/h or GPM)
Total head (m or ft)
Fluid name and temperature (°C)
Available NPSH (or specify low NPSH requirement)
Any special requirement (material, can length, stages, ATEX, etc.)
Our engineering team will reply within 24 hours with the recommended VS2 pump model, performance curve, CAD drawing, and factory price.
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1–OH6, BB1–BB5, VS1–VS7 types) serving global refineries, petrochemical plants, power utilities, chemical facilities, and low NPSH high head applications. Contact us for custom-engineered VS2 vertical can-type multistage pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.