This page provides complete technical parameters for our VS2 API 610 vertical can-type multistage centrifugal pump. The VS2 is designed with a barrel/can casing that maintains a flooded suction, delivering ultra‑low NPSH performance while achieving high discharge pressure through multistage impellers. It is ideal for refinery hydrocarbon feed, petrochemical reactor feed, power plant condensate boosting, and other low NPSH critical services.
Performance Range
| Parameter | Value |
|---|---|
| Flow rate | 3 ~ 1,000 m³/h (13 ~ 4,400 GPM) |
| Total head | 80 ~ 1,500 m (262 ~ 4,920 ft) – higher on request |
| Speed | 1,480 / 2,980 rpm (50/60 Hz) |
| Medium temperature | -40°C ~ +400°C (-40°F ~ +752°F) – higher with special materials |
| Maximum working pressure | Up to 150 bar (2,175 psi) |
| NPSHr | Ultra low NPSH can‑type hydraulic design – flooded suction eliminates cavitation |
Structural & Mechanical Design
Type: Vertical can‑type multistage pump (API 610 VS2 designation)
Casing: Barrel / can type pressure‑containing structure – pump sits inside a vertical can that is connected to the suction vessel or flooded pit
Number of stages: 2 ~ 12 stages customizable – more stages for higher head
Installation: Mounted on tank top (direct nozzle mount) or on a concrete foundation next to the vessel
Shaft: Long vertical high‑strength alloy shaft – designed for submerged operation with minimal deflection
Bearings: Internal liquid lubricated bushings (product lubricated) – no external oil system, low maintenance
Rotor: Cartridge assembly – the complete rotating element can be pulled out vertically for maintenance without disturbing the can casing or piping
Can‑Type Low NPSH Advantage
The can (barrel) is designed to maintain a flooded suction at all times. Liquid from the vessel flows into the can, ensuring the first‑stage impeller is always submerged. This provides exceptionally low NPSH requirements, allowing the VS2 to handle boiling point liquids, light hydrocarbons, hot condensate, and other services where horizontal pumps would cavitate.
Material Options
| Component | Standard Materials | Upgrade Options |
|---|---|---|
| Can & casing | Carbon steel, alloy steel, 316L | Duplex, super duplex |
| Impeller & diffuser | Stainless steel (316L), high chromium alloy | Duplex, 17-4PH |
| Shaft | Forged alloy steel (high strength), 316L | Duplex, K500 |
| Wear rings / bushings | Anti‑corrosion & anti‑abrasion alloy | Colmonoy‑coated, Stellite |
Key Design Features Explained
Ultra Low NPSH Can‑Type Design
The VS2’s flooded suction eliminates the need for high net positive suction head. The pump can operate with liquid at its boiling point (e.g., condensate, propane) without cavitation – a key advantage over horizontal BB or OH pumps.
High Head Multistage
By stacking 2 to 12 stages, the VS2 achieves heads up to 1,500 meters in a single, compact vertical unit. This eliminates the need for multiple pumps in series.
Cartridge Rotor for Easy Maintenance
The entire rotating assembly (impellers, shaft, bearings, wear rings) is a single cartridge. To service, unbolt the discharge head and lift the cartridge out vertically. The can casing and piping remain in place – typical overhaul in hours, not days.
Liquid Lubricated Bearings
Internal bushings are lubricated by the pumped fluid. No external oil system, no greasing, and no risk of product contamination.
Compact Vertical Footprint
The VS2 occupies minimal ground space – ideal for retrofits, offshore platforms, and congested plants.
Typical Applications
Refinery hydrocarbon feed to hydrotreaters, reformers
Petrochemical reactor feed (light hydrocarbons, solvents)
Power plant condensate boosting from low‑level hotwells
Low NPSH process boosting for LPG, propane, butane
Tank top high‑pressure multistage pumping
Available Technical Documents (Free Request)
API 610 data sheet (filled with your operating conditions)
Can installation drawing (2D CAD, PDF/DWG) – shows can length, flange details, foundation/tank interface
Performance curve (head, efficiency, NPSHr vs flow)
3D model (STEP/IGES for plant layout)
Material certificate (EN 10204 3.1 or 3.2)
Hydrostatic and performance test report
Get Your VS2 Pump Technical Specification Package
To request a complete documentation package with a formal quotation, please send us your operating conditions:
Flow rate (m³/h or GPM)
Total head (m or ft)
Fluid name and temperature (°C)
Available NPSH (or specify “low NPSH”)
Any special requirement (material, number of stages, can length, ATEX, etc.)
Our engineering team will respond within 24 hours with:
Recommended VS2 pump model (stages, can length, material)
Performance curve PDF
API 610 data sheet
2D CAD drawing (can installation) and 3D model link
Bearing and material recommendations
Factory direct price (EXW / FOB / CIF)
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1–OH6, BB1–BB5, VS1–VS7 types) serving global refineries, petrochemical plants, power utilities, chemical facilities, and low‑NPSH high‑head applications. Contact us for custom‑engineered VS2 vertical can‑type multistage pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.