The VS2 pump is an API 610 vertical can-type multistage centrifugal pump, specifically engineered for applications requiring ultra-low NPSH and high discharge pressure. The can (barrel) casing maintains a flooded suction, eliminating cavitation even when pumping boiling point liquids, light hydrocarbons, or hot condensate. Multistage impellers deliver heads up to 1,500 meters. Below are the primary application scenarios.
1. Oil Refinery
Hydrocracking unit feed – Pumping high-pressure hydrocarbon feed to hydrocracker reactors. Low NPSH from hot, light feedstocks is handled by the can-type flooded suction.
Vacuum distillation booster – Boosting reduced crude or vacuum gas oil from low-level columns to downstream units with high head.
Fractionator low NPSH pumping – Circulating reflux or removing bottoms from fractionators where available NPSH is minimal.
High-pressure hydrocarbon transfer – Moving LPG, naphtha, or light ends at high pressure from storage or process vessels with limited suction head.
Why VS2 for refinery: Can-type design provides ultra-low NPSH for light hydrocarbons near boiling point. Multistage delivers high pressure for reactor feed. Vertical footprint saves space in congested refineries.
2. Petrochemical Industry
Ethylene & propylene plant reactor feed – Feeding high pressure polymerization reactors with low NPSH propylene, ethylene, or other light olefins.
Low NPSH process medium – Pumping solvents, refrigerants, or other low-boiling-point liquids with limited suction head.
High-pressure circulation service – Circulating heat transfer fluids or process media in high-pressure loops.
Why VS2 for petrochemical: Can-type flooded suction prevents cavitation on light ends. 316L or duplex materials handle corrosive process media. All-welded construction for leak-free operation.
3. Power Generation
Condensate high-pressure boosting – Pumping hot condensate from low-level hotwells to deaerators or boiler feed pumps. Condensate is often near boiling point – VS2’s low NPSH is critical.
Boiler feed auxiliary pump – Providing high-pressure make-up water to intermediate pressure boilers.
Thermal power low liquid level high-lift system – Lifting water from deep sumps or low-level tanks to high elevation.
Why VS2 for power: Eliminates cavitation on hot condensate. Multistage achieves high head without multiple pumps. Compact vertical design fits in power plant auxiliary buildings.
4. Chemical Industry
Corrosive medium high-head delivery – Pumping hot acids, alkalis, or aggressive chemicals with 316L or duplex materials at high pressure.
Solvent multistage pressurization – Boosting organic solvents, chlorinated hydrocarbons, or other low NPSH liquids.
Reactor bottom liquid pumping – Removing high-pressure reactor contents from bottom outlets with low NPSH available.
Why VS2 for chemical: Full alloy construction for corrosion resistance. No submerged mechanical seal – only top-mounted seal above liquid. Liquid lubricated bearings avoid external oil contamination.
5. Industrial Process
Low NPSH limited installation space – Where horizontal pumps cannot meet NPSH requirements and floor space is restricted.
Tank top mounted high-pressure multistage pumping – Direct nozzle mount on tank top eliminates suction piping and reduces installation cost.
Special process applications – Any duty requiring high head from a low liquid level with limited NPSH.
Why VS2 for industrial process: Simple installation – bolt to tank nozzle or foundation. Easy maintenance – cartridge rotor pulls out vertically. Reliable 24/7 operation with liquid lubricated bearings.
Custom Solutions for Critical Working Conditions
Custom stage number – 2 to 12+ stages to achieve exact head requirement (up to 1,500 m)
Custom can length – Matched to tank nozzle elevation or foundation layout
Material upgrades – Carbon steel, 316L, duplex, super duplex, alloy steel
High temperature design – Up to 400°C with thermal compensation
Sealing – Top-mounted API 682 mechanical seal; no submerged seal
Low NPSH optimization – Inducer on first stage for extreme low NPSH
Get an Application-Specific VS2 Pump Recommendation
To help you select the right VS2 pump for your low NPSH high head application, please send us:
Application name (e.g., "refinery hydrocracker feed" or "power plant condensate")
Flow rate (m³/h or GPM)
Total head (m or ft)
Fluid name and temperature (°C)
Available NPSH (or specify "low NPSH")
Installation type (tank top or foundation)
Our engineering team will respond within 24 hours with:
Recommended VS2 pump model (stages, can length, material)
Performance curve with duty point
API 610 data sheet
Can installation drawing (2D CAD) and 3D model
Factory direct price (EXW / FOB / CIF)
Email: info@hyrig.com
We are a professional API 610 pump manufacturer (OH1–OH6, BB1–BB5, VS1–VS7 types) serving global refineries, petrochemical plants, power utilities, chemical facilities, and low NPSH industrial processes. Contact us for custom-engineered VS2 vertical can-type multistage pumps at factory direct wholesale pricing.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.