Substructures
Design Features
1.Four kinds of substructures: box-on-box, integrate and one step risen, two-step raising & swing-lift.
2.The box-on-box structure: The front platform is suitable for installing standard BOP and the rear platform for installing heavy main drawworks
and transmission groups.
3.Integrate and one step risen: It is raised in place with the mast. The mast, the drill floor, and equipment on the drill floor are installed at ground
level and raised/lowered with power of drawworks.
4.The two-step structure: The equipment on the drill floor can be installed at ground level. The mast is raised when the drill floor is in the lower
position. Then the floor and entire mast are raised together. The drill floor is equipped with two hydraulic cylinders, which serve the function of
snubbing while raising the floor and push-back while lowering the floor.
5.The swing-lift structure: The rope for the mast and the substructure is reeved only once. They are raised integrally with power of drawworks.
The mast, the drill floor, and the equipment on the drill floor are all installed at ground level.
6.The substructures conform to API Spec 4F.
Basic Parameters of Substructures
| Model | DZ225/6-XD |
| Height of drill foor m(ft) | 6(20) |
Clear height under rotary table beam m(ft) | 4.77(15.65) |
| Rotary table beam load rating kN | 2250 |
| Stand load rating kN | 1150 |
| Max.static hook load kN | 2250 |
| Bottom span of mast m(ft) | 8(26.3) |
| Model | DZ225/7.5-S |
| Height of drill foor m(ft) | 7.5(25) |
Clear height under rotary table beam m(ft) | 6.26(20.54) |
| Rotary table beam load rating kN | 2250 |
| Stand load rating kN | 1150 |
| Max.static hook load kN | 2250 |
| Bottom span of mast m(ft) | 8(26.3) |
| Model | DZ315/7.5-XD |
| Height of drill foor m(ft) | 7.5(25) |
Clear height under rotary table beam m(ft) | 6.26(20.54) |
| Rotary table beam load rating kN | 3150 |
| Stand load rating kN | 1600 |
| Max.static hook load kN | 3150 |
| Bottom span of mast m(ft) | 9(30) |
| Model | DZ315/9-S |
| Height of drill foor m(ft) | 9(30) |
Clear height under rotary table beam m(ft) | 7.62(25) |
| Rotary table beam load rating kN | 3150 |
| Stand load rating kN | 1600 |
| Max.static hook load kN | 3150 |
| Bottom span of mast m(ft) | 8(26.3) |
| Model | DZ450/9-XD |
| Height of drill foor m(ft) | 9(30) |
Clear height under rotary table beam m(ft) | 7.73(25.4) |
| Rotary table beam load rating kN | 4500 |
| Stand load rating kN | 2200 |
| Max.static hook load kN | 4500 |
| Bottom span of mast m(ft) | 9(30) |
| Model | DZ450/10.5-S |
| Height of drill foor m(ft) | 10.5(35) |
Clear height under rotary table beam m(ft) | 8.92(29.3) |
| Rotary table beam load rating kN | 4500 |
| Stand load rating kN | 2200 |
| Max.static hook load kN | 4500 |
| Bottom span of mast m(ft) | 9(30) |
| Model | DZ585/10.5-X |
| Height of drill foor m(ft) | 10.5(35) |
Clear height under rotary table beam m(ft) | 9(29.5) |
| Rotary table beam load rating kN | 5850 |
| Stand load rating kN | 2880 |
| Max.static hook load kN | 5850 |
| Bottom span of mast m(ft) | 10(33) |
| Model | DZ675/12-S |
| Height of drill foor m(ft) | 12(40) |
Clear height under rotary table beam m(ft) | 10(33) |
| Rotary table beam load rating kN | 6750 |
| Stand load rating kN | 3240 |
| Max.static hook load kN | 6750 |
| Bottom span of mast m(ft) | 10(33) |
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.