Cryogenic Pump Construction – API 610 VS6 Component Breakdown & Submerged Motor

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 610 VS6 cryogenic pump – double‑casing diffuser design. Submerged motor, integrally cast diffuser bowls, induced flow first stage, thrust bearing in discharge head. For LNG, liquid nitrogen, hydrogen, and industrial gases. Up to 20,000 m³/h.

Conatct For Details
DetailReview(0)Additional

Major Components of a Cryogenic Pump

The API 610 Type VS6 cryogenic pump has seven primary assemblies.

1. Submerged Motor Unit

  • The pump and motor are coaxially integrated, fully immersed in the cryogenic liquid.

  • Stator windings are epoxy‑encapsulated or specially insulated for cryogenic temperatures.

  • Rotor is fitted with permanent magnets or induction cage; cooled directly by pumped liquid.

2. Outer Barrel (Can / Suction Vessel)

  • Cylindrical pressure‑containing vessel enclosing the pump.

  • Fabricated from 9% nickel steel or stainless steel for cryogenic service.

  • Prevents vapour ingress and maintains flooded suction.

3. Inner Pump Assembly (Cartridge)

  • Removable unit containing all hydraulic stages.

  • Diffuser bowls are integrally cast (single or multiple pieces) bolted together with metal‑to‑metal joints.

4. Inducer & First‑Stage Impeller

  • Inducer mounted immediately before first‑stage impeller to raise suction pressure.

  • First‑stage impeller has large eye and low‑specific‑speed design for minimal NPSHr.

5. Diffuser Stack (Multistage)

  • Each impeller has its own diffuser with integral guide vanes.

  • Converts velocity to pressure with high efficiency (80%+ in well‑designed units).

  • Replaceable inter‑stage bushings.

6. Thrust Bearing

  • Located in the discharge head (above liquid level).

  • Kingsbury tilting‑pad type, L10 life ≥25,000 hours per API 610.

  • Lubricated by pumped liquid or external oil system.

7. Discharge Head & Column Pipe

  • Supports driver (motor) and transmits discharge flow.

  • Contains seal chamber (API 682) although seal is static at electrical penetration only.


For any inquiries, please contact: info@hyrig.com



Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit