Independent technical comparison of major cryogenic in‑tank pump suppliers at the same LNG terminal duty (Q = 319 m³/h, H = 275 m):
| Supplier | Efficiency | NPSHr |
|---|---|---|
| Our API 610 VS6 | 80.2% | 0.37 m |
| Competitor A (Nikkiso) | 69.5% | 0.50 m |
| Competitor B (Ebara) | 68.1% | 0.58 m |
Higher efficiency directly translates to reduced operating costs. For a typical 9‑pump LNG terminal, the efficiency differential can generate annual savings exceeding RMB 2 million in electricity alone.
| Cost factor | Standard pump | API 610 VS6 cryogenic pump |
|---|---|---|
| Mechanical seal leakage | Frequent (dynamic seal) | None (static electrical penetration only) |
| Seal replacement labour | Every 2‑3 years | Not required |
| Energy consumption | Baseline | 5‑15% lower |
| Unplanned downtime (days/year) | 3‑5 days | <1 day |
| Total 20‑year lifecycle cost | Higher | Lower by 25‑40% |
Zero fugitive emissions – No shaft seal eliminates methane slip from LNG pumps.
Avoided production loss – Submerged unit eliminates dry‑run and cavitation failures.
Lower maintenance frequency – Bearing L10 life ≥25,000 hours.
The higher initial investment of an API 610 VS6 cryogenic pump is typically recovered in 12‑24 months through reduced energy consumption, eliminated seal maintenance and extended overhaul intervals.
For any inquiries, please contact: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.