Cryogenic Pump Materials – API 610 VS6 Alloys for Low‑Temperature Service

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
API 610 VS6 cryogenic pump with full material traceability. Wetted parts: 9% nickel steel (-196°C), 304L/316L SS, duplex, Inconel. Impact tested per ASME standards. NACE MR0175 for sour cryogenic hydrocarbons. Full EN 10204 3.1 certification.

Conatct For Details
DetailReview(0)Additional

Material Selection for Cryogenic Temperatures

Cryogenic service (down to -196°C) requires materials that maintain toughness, ductility and impact resistance – many steels become brittle at low temperatures. Our pumps use only certified materials verified by Charpy V‑notch impact tests.

Component Materials by Temperature

Component-50°C to -100°C-100°C to -160°C-160°C to -200°C
Outer barrelLTCS or 304L SS304/316L SS9% nickel steel
Diffuser bowls304 SS304/316L SS316L SS or 9% Ni
Impellers304 SS / bronze304/316L SS316L SS or Inconel
Inducer304 SS316L SS316L SS (impact tested)
Shaft4140 (hardened)17‑4 PH17‑4 PH / Inconel 718
BoltingL7 / B7B8 (304)B8M (316)

Low‑Temperature Steel Alloys

  • 9% nickel steel – The reference material for cryogenic service down to -196°C, used for large LNG tanks and pump barrels. Combines high strength (620-830 MPa yield) with excellent toughness.

  • LTCS (Low Temperature Carbon Steel) – Suitable down to -50°C, economical for less severe cryogenic services.

  • Austenitic stainless steel (304L/316L) – Maintains toughness to -269°C, preferred for smaller pumps where 9% nickel is not cost‑effective.

Material Certification

  • Charpy impact tests at design temperature (minimum three specimens).

  • EN 10204 Type 3.1 certification for all wetted parts.

  • NACE MR0175 available for sour cryogenic hydrocarbons.


For any inquiries, please contact: info@hyrig.com


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit