| Standard | Scope | Our compliance |
|---|---|---|
| API 610 / ISO 13709 | Centrifugal pumps for petroleum, heavy chemical and gas industries | VS6 / VS7 types, 20‑year design life |
| ISO 24490:2025 | Minimum requirements for design, manufacture and testing of centrifugal pumps for cryogenic service | Full compliance with latest edition |
ASME Section VIII, Div. 1 – Pressure vessel design for outer barrel / suction vessel.
ASME Section IX – Welding qualification.
PED 2014/68/EU – European Pressure Equipment Directive, Cat. III (depending on fluid and pressure).
ATEX / IECEx – II 2G Ex h IIB T4 for Zone 1 hazardous areas (LNG vapour).
API 682 4th Edition – Mechanical seal chambers (static electrical penetration).
The ISO 24490:2025 (effective from October 2025) specifies minimum requirements for design, materials, NDE, testing, and documentation for centrifugal pumps for cryogenic service. It also provides guidance on installation design but does not cover operation or maintenance.
20‑year design life – Per API 610, ISO 13709.
3‑year continuous operation – Designed for uninterrupted service.
L10 bearing life ≥25,000 hours – Thrust bearing in discharge head.
Hydrostatic test at 1.5× MAWP – Outer barrel and discharge head tested.
Performance test per API 610 Grade 2 – Water or cryogenic test fluid.
NACE MR0175 – For sour cryogenic hydrocarbons (H₂S‑containing LNG).
For any inquiries, please contact: info@hyrig.com
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.