Roller Reamer – GL Series – Complete Product Introduction

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Roller reamer is designed for various reaming operations, especially in hard or abrasive formations, to maintain standard hole size. When the drill bit wears and becomes under gauge, the roller reamer reams the bottom well and restores standard hole size. Whether drilling vertical or directional wells, the three‑roller reamer ensures that the following drill bit or casing can run into a normal hole size. Features include low frictional resistance against the well wall, strong abrasive resistance, and long service life. Available models: GL149, GL152, GL216, GL311, GL444, GL559, GL660, GL711.

Conatct For Details
DetailReview(0)Additional

Overview
The roller reamer is a downhole tool specifically designed for various reaming operations. It is particularly effective in hard formations or abrasive formations where maintaining a standard, full‑gauge hole size is challenging. When the drill bit wears and becomes under gauge (i.e., drilling a smaller diameter than intended), the roller reamer can be run to ream the bottom section of the well and restore it to the standard hole size. Whether drilling a vertical well or a directional well, the three‑roller reamer ensures that the following drill bit (or casing string) can run into a normal, full‑gauge hole size without hanging up. Key features of the roller reamer include low frictional resistance against the well wall, strong abrasive resistance, and a long service life.

Key Features

  • Three‑Roller Design – Rolling cutters (cones) contact the borehole wall, reaming to full gauge with minimal friction.

  • Hard & Abrasive Formation Capable – Rollers are hardfaced or fitted with tungsten carbide inserts for extreme wear resistance.

  • Restores Under‑Gauge Hole – Reams bottom hole sections where the bit has worn below standard diameter.

  • Ensures Smooth Run for Bit/Casing – Creates a consistent, full‑gauge borehole, preventing hang‑ups.

  • Low Frictional Resistance – Rolling action instead of sliding dramatically reduces torque and drag.

  • Long Service Life – Robust construction and replaceable or hardfaced rollers provide extended operational life.

  • Wide Size Range – Models from 149.2 mm (5‑7/8″) to 711.2 mm (28″) working OD.

Working Principle
The roller reamer is placed in the bottom hole assembly (BHA) above the bit or as a string tool. It consists of a central body with three or more rolling cutters (rollers) mounted on journals. As the drill string rotates, the rollers contact the borehole wall and rotate independently. Unlike a fixed‑blade stabilizer or reamer, the rolling action generates very low friction against the formation. The rollers are dressed with hardfacing or tungsten carbide inserts to resist abrasion. When the drill bit wears under gauge, the roller reamer’s larger diameter (standard hole size) will contact the formation and ream it back to full gauge. In vertical wells, it helps maintain a straight, in‑gauge hole. In directional wells, it prevents ledges and doglegs that could obstruct subsequent bits or casing. The low friction also reduces the risk of differential sticking and lowers surface torque.

Technical Specifications

ModelWorking OD mm (inch)ID mm (inch)Body OD mm (inch)OAL mm (ft)Roller OD mm (inch)Roller Length mm (inch)Connection
GL149149.2 (5-7/8)31.8 (1-1/4)120.7 (4-3/4)1400 (4.6)46 (1-13/16)200 (7-7/8)NC38
GL152152.4 (6)31.8 (1-1/4)120.7 (4-3/4)1400 (4.6)50.8 (2)200 (7-7/8)NC38
GL216215.9 (8-1/2)44.5 (1-3/4)165 (6-1/2)1730 (5.7)71.4 (2-13/16)200 (7-7/8)NC50
GL311311.15 (12-1/4)71.4 (2-13/16)203 (8)1900 (6.2)100 (3-15/16)300 (11-13/16)6-5/8 REG
GL444444.5 (17-1/2)76.2 (3)229 (9)2200 (7.2)140 (5-1/2)304 (12)7-5/8 REG
GL559558.8 (22)76.2 (3)241.3 (9-1/2)2667 (8.8)158 (6-7/32)400 (15-3/4)7-5/8 REG
GL660660.4 (26)76.2 (3)241.3 (9-1/2)2867 (9.4)178 (7)400 (15-3/4)7-5/8 REG
GL711711.2 (28)76.2 (3)241.3 (9-1/2)2867 (9.4)178 (7)400 (15-3/4)7-5/8 REG

Note: Custom specifications and other sizes are available upon request – refer to the technical agreement for details.

Applications

  • Vertical, directional, and horizontal wells where bit wear or formation abrasiveness causes under‑gauge holes

  • Reaming bottom hole sections before running casing or a subsequent bit

  • Hard rock drilling (granite, basalt, quartzite) and abrasive sandstones

  • Wells requiring low torque and drag while maintaining full gauge

  • Onshore and offshore drilling, including deep and HPHT wells

Value Proposition

  • Restores Full Gauge – Reams under‑gauge hole sections to standard diameter, ensuring proper casing or bit run.

  • Low Friction – Rolling cutters reduce torque and drag, lowering surface power requirements and protecting equipment.

  • Extremely Wear Resistant – Hardfaced or carbide‑insert rollers last much longer than fixed‑blade reamers in abrasive formations.

  • Smoother Tripping – Consistent hole gauge prevents ledges and tight spots, reducing stuck pipe risk.

  • Long Service Life – Rollers can be replaced or refurbished, extending tool life across multiple runs.

The GL series roller reamer is an indispensable tool when hole gauge integrity is critical. By using low‑friction rolling cutters instead of fixed blades, it provides superior abrasive resistance and reaming performance in hard formations, ensuring that every bit and casing string reaches target depth without obstruction.

Contact Us
For technical data sheets, roller selection, or a quotation, please contact:
Email: info@hyrig.com


Roller Reamer – Roll to full gauge, run without resistance.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit