The KRTK 80-251/252UC2-P is a high-performance submersible centrifugal pump from the world-renowned KSB Amarex KRT series. Designed as a horizontal or vertical single-stage submersible motor pump in close-coupled configuration, this pump delivers reliable and efficient operation for the most demanding wastewater applications in municipal and industrial sectors.
Engineered for handling untreated sewage and aggressive waste water, the KRTK 80-251/252UC2-P excels at pumping fluids containing long fibres, solid substances, air/gas pockets, as well as raw, activated and digested sludge.-15
| Code Component | Meaning | Explanation |
|---|---|---|
| KRT | Amarex KRT series submersible motor pump | KSB's premium wastewater pump platform |
| K | Impeller type: Channel impeller | Non-clog design for solids passage; E = vortex impeller, D = multi-vane impeller, F = free-flow impeller |
| 80 | Nominal discharge nozzle diameter DN80 (mm) | Connection size: 3-inch flange |
| 251 | Maximum nominal impeller diameter in mm (x1 = 251mm) | Defines the hydraulic size rating |
| 252 | Actual installed impeller diameter | Indicates trimmed impeller diameter (252mm) |
| U | Motor variant | Standard motor (non-explosion proof unless otherwise specified) |
| C | Material variant | Typically grey cast iron (G) or stainless steel components |
| 2 | Motor number / pole designation | Defines electrical characteristics |
| P | Design feature | Specific pump configuration identifier |
| Parameter | Value / Range |
|---|---|
| Pump type | Submersible centrifugal pump |
| Series | KSB Amarex KRT |
| Configuration | Horizontal or vertical, single-stage, close-coupled |
| Impeller type | K-Type (channel impeller) – non-clog design |
| Discharge flange | DN80 (3 inches) |
| Max. flow rate (series) | Up to 10,080 m³/h (series max) |
| Max. head (series) | Up to 120 m |
| Motor | Submersible, close-coupled, direct drive |
| Motor efficiency | IE3 (energy-saving standard) |
| Enclosure protection | IP68 (submersible, tested to maximum depth) |
| Max. fluid temperature | 60°C (140°F) |
| Max. allowed working pressure | 12 bar |
| Installation types | Wet-well (submerged) or dry-installation (pit) |
| Mounting | Stationary or transportable version available |
| ATEX compliance | Available (explosion-proof version) |
| Cable entries | Resin-sealed, water-tight (remains sealed even with damaged outer sheath) |
Note: For exact duty-specific parameters (Q-H curve, power consumption, NPSHr), please refer to the KSB selection program or contact our engineering team.
The motor and pump are directly flanged without intermediate couplings or long shafts. This compact design minimises space requirements, reduces maintenance complexity, and ensures perfect alignment between the motor and hydraulic end. The KRTK is fully floodable and designed for continuous submerged operation.-7
The K-type channel impeller is specifically developed for challenging wastewater applications. With a single, smoothly curved flow passage, the impeller allows solids and long-fibrous materials to pass through without clogging. The non-clog design significantly reduces downtime caused by blockages – a common issue in conventional centrifugal pumps handling untreated sewage.
Independent of the fluid being handled, the closed jacket cooling system ensures optimal heat dissipation in all operating modes – whether the pump is fully submerged, operating in dry-installation mode, or running partially flooded. This unique cooling design prevents motor overheating even during extended dry-running periods.
The motor is rated IP68, certified for continuous operation at maximum submergence depths. All cable entries are absolutely water‑tight with a resin-sealed design. Even if the external cable sheath is accidentally damaged, the resin encapsulation prevents any moisture ingress into the motor – a critical safety and reliability feature unique to KSB.
The pump is equipped with:
Leakage sensors – Detect any moisture ingress into the motor chamber and trigger alarms before damage occurs
Temperature monitoring sensors – Protect the motor windings from overheating during abnormal operation
Thermal class F or H insulation – For extended motor life at elevated temperatures
The KRTK 80-251/252UC2-P submersible centrifugal pump is suitable for a wide range of demanding pumping duties:
| Application Area | Specific Duties |
|---|---|
| Municipal wastewater | Sewage pumping stations, lift stations, wastewater treatment plants |
| Industrial wastewater | Factory effluent, chemical plant wastewater, food processing waste |
| Sludge handling | Raw sludge, activated sludge, digested sludge (primary and secondary) |
| Stormwater drainage | Flood control, rainwater pumping, combined sewer overflows |
| Seawater intake/outfall | Desalination plant feed, cooling water systems |
| Mining and quarry dewatering | Pit dewatering, mine water transfer |
| Agricultural waste | Livestock waste, biogas plant feed |
The pump handles:
Untreated sewage with long fibres
Fluids containing air or gas pockets
Raw, activated and digested sludge
Abrasive or aggressive waste waters
Solids-laden liquids
The pump is installed directly into a wet well or sump, fully submerged in the pumped liquid. This is the most common configuration for sewage and wastewater pumping stations. The pump can be mounted on a guide rail system for easy removal and maintenance without entering the wet well.
The pump can also be installed in a dry pit or pump room, with suction line connected to the wet well. In this configuration, the motor is cooled by the integrated jacket cooling system – independent of the fluid being handled.
Stationary version – Permanently installed with fixed piping and electrical connections.
Transportable version – Equipped with a base frame and quick-connect couplings for temporary or mobile pumping applications (e.g., emergency bypass pumping, construction site dewatering).
| Feature | Available Option |
|---|---|
| Explosion protection | ATEX II 2G Ex d IIB T3 / ATEX II 2G Ex h IIB T4 |
| Motor efficiency | IE3 (as standard), IE4 (high efficiency, on request) |
| Impeller type | K (channel), E (vortex), D (multi-vane), F (free-flow) |
| Materials | Grey cast iron (G), stainless steel (C2/HC), duplex |
| Frequency | 50 Hz or 60 Hz |
| Voltage variants | Multiple voltages: 400V, 460V, 690V or higher on request |
The KRTK Series sets industry benchmarks:
Maximum flow rate for the series: 10,080 m³/h
Maximum head: 120 m
Maximum motor power available: up to 850 kW
Pump efficiency: up to 83% (larger sizes with optimised hydraulics)
Designed for continuous operation (S1 duty)
Proven KSB quality – Over 30 years of Amarex KRT design evolution with thousands of installations worldwide
Low lifecycle cost – Energy-efficient IE3 motor, non-clog design, and long service intervals
High reliability – IP68 enclosure, resin-sealed cables, jacket cooling, and comprehensive sensors ensure trouble-free operation
Flexible installation – Wet or dry, stationary or transportable, vertical or horizontal
Global support – KSB service network with spare parts availability worldwide
ATEX ready – Versions available for potentially explosive atmospheres (gas groups IIB and IIC)
Modular construction – Major components (hydraulic end, motor, seal chamber) can be serviced or replaced independently
Accessible seals – Double mechanical seal arrangement in an oil-filled chamber, easily inspectable and replaceable
Spare parts availability – Comprehensive stock of wear parts, seal kits, and motor components
Service centres – KSB-certified service centres in all major industrial regions
For a detailed selection of the correct pump model for your specific duty – including flow rate, head, fluid characteristics, and installation type – please contact us with your project requirements.
Email: info@hyrig.com
Our engineers provide complete technical support for KSB Amarex KRT submersible centrifugal pumps – from initial selection to installation and ongoing service.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.