Overview
The HCJT series top drive floating cushion sub is an essential tool for modern drilling operations, specifically designed to protect the top drive system. It is suitable for oil, gas, and geological exploration drilling. By absorbing axial shock and dampening vibration, it effectively increases the service life of bearings and gears inside the top drive rotary box. The tool is particularly valuable in inclined well drilling, vertical well drilling, and rig vertical drilling operations.
Key Benefits
Extends Top Drive Life – Reduces impact loads on top drive rotary box bearings and gears, minimizing wear and preventing premature failure.
Smooth Drilling Performance – Absorbs axial oscillations caused by bit bounce, formation changes, or weight transfer issues, resulting in more stable drilling.
Robust Construction – Designed for harsh downhole conditions with high seal pressure and torque capacity.
Simple Integration – Standard 6-5/8 REG connections (box × pin) allow easy installation between top drive and drill string.
Working Principle
The floating cushion sub incorporates a precision‑machined internal stroke mechanism. During drilling, axial displacement (up to 76 mm / 3 inches) is allowed while maintaining full hydraulic seal integrity. When the drill string experiences upward or downward impact forces, the sub compresses or extends within its stroke range, absorbing the shock energy before it reaches the top drive rotary box. This cushioning effect significantly reduces peak loads on the top drive’s internal bearings and gears. The seal system rated at 35 MPa (5,000 psi) prevents drilling fluid ingress or pressure loss during the stroking motion.
Technical Specifications
| Model | Lifting Load (Ton) | Stroke mm (in) | Seal Pressure MPa (psi) | Working Torque kN·m (lbf·ft) | Weight (kg) | Connection |
|---|---|---|---|---|---|---|
| HCJT150 | 150 | 76 (3) | 35 (5,000) | 30 (22,000) | 310 | 6-5/8 REG B×P |
| HCJT180 | 180 | 76 (3) | 35 (5,000) | 50 (37,000) | 440 | 6-5/8 REG B×P |
| HCJT250 | 250 | 76 (3) | 35 (5,000) | 50 (37,000) | 380 | 6-5/8 REG B×P |
Note: Custom lifting loads and connection sizes are available upon request – refer to the technical agreement for details.
Applications
Inclined well drilling (directional and horizontal wells)
Vertical well drilling
Rig vertical drilling operations
Any top drive application where axial shock and vibration are present
The HCJT floating cushion sub is especially beneficial when drilling through interbedded formations, hard rock, or when using PDC bits that generate significant torsional and axial vibrations.
Value Proposition
Reduced Maintenance Costs – Protects expensive top drive rotary box components, extending overhaul intervals.
Increased Drilling Efficiency – Minimizes downtime caused by top drive bearing or gear failures.
Improved Drill String Dynamics – Smoother weight transfer reduces stick‑slip and improves rate of penetration (ROP).
Simple, Reliable Design – No complex hydraulics or electronics; purely mechanical cushioning for maximum durability.
The HCJT series top drive floating cushion sub is a cost‑effective, reliable solution for protecting your top drive investment while improving drilling performance in a wide range of well types.
Contact Us
For technical specifications, pricing, or custom manufacturing inquiries, please contact:
Email: info@hyrig.com
HCJT – Protect your top drive, extend its life, drill smoother.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.