DX Surface Bumper Jar – Complete Product Introduction

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
DX surface bumper jar is a new type mechanical surface jar designed to release stuck downhole tools from the wellhead. It applies to stuck conditions requiring downward jarring such as key slots, shrink neck, fallen blocks, sticking, and suction. It can also relieve stuck fishing tools, testing tools, repair tools, and wash tools – regardless of which part of the drill stem is stuck. The DX jar overcomes former friction type defects like slips easily burning and inaccurate adjustment. It allows jarring release force adjustment at any time, with easy, exact, and stable operation. Model DX178 features 178 mm OD, 48 mm ID, 2000 mm stroke, and NC50 connection.

Conatct For Details
DetailReview(0)Additional

Overview
The DX surface bumper jar is a new type mechanical surface jar specifically designed to release stuck downhole tools from the wellhead (surface). Unlike downhole jars that are placed in the BHA, the surface bumper jar operates at the rig floor, allowing the driller to apply controlled downward jarring impacts directly from the surface. It is applicable to stuck conditions that require downward jarring, including key slots, shrink neck (tight spots), fallen blocks, sticking to the borehole wall, and suction (differential sticking). The tool can also relieve stuck fishing tools, testing tools, well repair tools, and well washing tools. No matter which part of the drill stem is stuck – drill pipe, collars, fishing assembly, or other downhole tools – the DX surface bumper jar can be used to deliver effective downward impacts.

The DX jar overcomes the common defects of previous friction‑type surface jars, such as slips that easily burn out and inaccurate adjustment of jarring force. With the DX design, the operator can adjust the jarring release force at any time, and the adjustment is easy, exact, and stable.

Key Features

  • Surface Operation – Works at the wellhead/rig floor; no need to trip out to change or adjust the jar.

  • Downward Jarring Focus – Ideal for stuck conditions that respond best to downward impacts (keyseats, tight holes, bridges, sand sticks, differential sticking).

  • Wide Application – Releases stuck drill stem, fishing tools, testing tools, repair tools, wash tools – any downhole tool that is stuck.

  • Overcomes Friction Type Defects – No slip burning; precise and repeatable force adjustment.

  • Adjustable Jarring Force Anytime – Field adjustment is easy, exact, and stable, allowing optimization for different stuck conditions.

  • Long Stroke – 2000 mm (78‑3/4 inches) stroke allows substantial energy storage for powerful impacts.

  • High Strength – 2400 KN max tensile load, 18 KNm torque rating, suitable for demanding fishing jobs.

Working Principle
The DX surface bumper jar is a mechanical tool placed between the top drive or swivel and the drill string at the surface. When the drill string is stuck downhole, the operator slacks off weight (compresses the string) to activate the jar. The internal mechanical latching mechanism holds until a preset downward force is reached. At that point, the latch releases suddenly, allowing the mandrel to stroke downward rapidly. The kinetic energy stored in the compressed drill string and the jar’s internal spring is converted into a sharp downward impact that is transmitted through the drill string to the stuck point.

The key improvement of the DX jar over older friction‑type designs is the adjustment mechanism. Older jars used friction slips that wore out quickly and gave inconsistent release forces. The DX jar uses a precision mechanical latch that can be adjusted easily on the rig floor – no special tools required. The operator can dial in the exact release force needed, and the adjustment remains stable over many jarring cycles. If the first jarring force does not free the fish, the operator can increase the force immediately and try again, without pulling the tool out of the string.

Technical Specifications (Model DX178)

ParameterSpecification
ModelDX178
OD mm (inch)178 (7)
ID mm (inch)48 (1-7/8)
Max Stroke mm (inch)2000 (78-3/4)
Max Working Torque (Limited) KNm (lbf·ft)18 (14,000)
Max Tensile Load KN (lbf)2400 (540,000)
Working Temperature-40°C ~ 120°C
Overall Length mm (ft)4150 (13.6)
Connection (API)NC50

Note: Other sizes and custom specifications are available upon request – refer to the technical agreement for details.

Applications

  • Releasing stuck drill pipe, drill collars, casing, or tubing when the stuck point responds to downward jarring

  • Keyseat sticking – where the drill string is wedged into a groove in the borehole wall

  • Shrink neck / tight hole – where formation swelling or creep has reduced hole diameter

  • Fallen blocks / cavings – where formation debris has bridged above the BHA

  • Sticking to suction – differential sticking where the pipe is held against the borehole wall by pressure differential

  • Stuck fishing tools (spears, overshots, magnets, mills, etc.)

  • Stuck testing tools, well repair tools, well washing tools

  • Any downhole stuck situation where surface‑applied downward jarring is preferred over upward jarring

The DX surface bumper jar is particularly valuable in fishing operations where repeated downward jarring with adjustable force is required, and where using a downhole jar would be impractical or impossible.

Value Proposition

  • Immediate Availability – No need to trip out to install a downhole jar; the surface jar is always ready at the rig floor.

  • Adjustable Force Anytime – Unlike friction‑type jars with fixed or hard‑to‑change settings, the DX jar allows easy, exact, stable adjustment on the rig floor.

  • No Slip Burning – Overcomes the most common failure mode of older surface jars – no burned slips, no loss of grip.

  • Long Stroke – 2000 mm stroke stores significant energy for powerful, effective jarring.

  • Versatile – Works for any stuck downhole tool, regardless of the cause or location of the stuck point.

  • Cost‑Effective – Reduces the need for expensive fishing operations or sidetracking by providing a reliable surface jarring solution.

The DX surface bumper jar is a modern, reliable, and easy‑to‑use mechanical jar that brings precision and control to surface jarring operations. Whether the stuck point is a keyseat, tight hole, bridge, or differential sticking, the DX jar delivers adjustable, stable, and powerful downward impacts to free the string quickly and safely.

Contact Us
For technical data sheets, force adjustment procedures, or a quotation, please contact:
Email: info@hyrig.com


DX Surface Bumper Jar – Exact adjustment, stable force, reliable release at the surface.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit