Overview
The BX lubricated fishing bumper sub is a specialized mechanical jarring tool designed for downhole fishing operations. Unlike conventional bumper subs, its working chamber is filled with hard wearing hydraulic oil, which provides continuous internal lubrication during operation. This lubrication significantly prolongs the service life of the tool’s internal components, reducing wear and maintenance requirements. The BX bumper sub is characterized by a long stroke and large jarring force, making it highly effective for loosening and releasing stuck fish. According to specific downhole conditions, the releasing force for downward jarring can be adjusted differently for various occasions, giving the operator flexibility to match the tool’s performance to the fish type and sticking mechanism.
Key Features
Hydraulic Oil Lubricated Chamber – Filled with hard wearing hydraulic oil for internal lubrication, reducing friction and extending tool life.
Long Stroke – Extended stroke length (up to 470 mm) allows greater energy storage and more effective jarring.
Large Jarring Force – Delivers powerful downward impacts to break loose stubborn stuck fish.
Adjustable Downward Jarring Release – Jarring force can be tuned for different occasions and stuck pipe scenarios.
Robust Construction – High tensile and torsional ratings ensure reliability under extreme fishing loads.
Four Models Available – Covers OD from 121 mm (4-3/4″) to 203 mm (8″) for a wide range of hole sizes.
Working Principle
The BX bumper sub operates on a mechanical jarring principle with the added benefit of hydraulic oil lubrication. The tool consists of a mandrel that slides within an oil‑filled outer housing. A mechanical latching mechanism holds the mandrel in place until a preset downward force (slack‑off weight) is applied. When the preset force is reached, the latch releases, allowing the mandrel to stroke rapidly downward. The kinetic energy stored during the slack‑off is converted into a powerful impact at the end of the stroke, which is transmitted to the stuck fish.
The hydraulic oil filling serves two purposes: first, it lubricates the sliding surfaces and latch mechanism with every stroke, dramatically reducing wear and ensuring consistent performance over many cycles. Second, the oil provides a degree of damping, preventing metal‑to‑metal impact damage within the tool. The long stroke (up to 470 mm) allows a greater amount of energy to be stored, resulting in larger jarring force than shorter‑stroke tools. The downward jarring release force can be adjusted on site or at the maintenance shop by changing spring preload or latch settings, allowing the operator to optimize the tool for different fish types (e.g., sand‑stuck, differentially stuck, or mechanically stuck pipe).
Technical Specifications
| Model | BX121 | BX165 | BX178 | BX203 |
|---|---|---|---|---|
| OD mm (inch) | 121 (4-3/4) | 165 (6-1/2) | 178 (7) | 203 (8) |
| ID mm (inch) | 38.1 (1-1/2) | 50.8 (2) | 63 (2-1/2) | 70 (2-3/4) |
| Connection (API) | NC38 | NC50 | NC50 | 6-5/8 REG |
| Max Tensile Load KN (lbf) | 1100 (247,000) | 1400 (315,000) | 1450 (326,000) | 1500 (337,000) |
| Tensile Yield KN (lbf) | 1950 (438,000) | 2100 (472,000) | 2200 (495,000) | 2400 (540,000) |
| Limited Torque KNm (lbf·ft) | 8 (6,000) | 13 (9,000) | 15 (11,000) | 20 (14,000) |
| Torsional Yield KNm (lbf·ft) | 15 (11,000) | 20 (14,000) | 27 (19,000) | 35 (25,000) |
| Max Stroke mm (inch) | 405 (15-15/16) | 466 (18-11/32) | 470 (18-1/2) | 462 (18-3/16) |
| Overall Length mm (ft) | 2700 (8.9) | 3200 (10.5) | 3450 (11.3) | 3464 (11.4) |
Note: Custom specifications and other connections are available upon request – refer to the technical agreement for details.
Applications
Fishing operations where downward jarring is the primary release mechanism
Stuck drill pipe, drill collars, casing, tubing, or downhole tools that respond best to downward impacts
Wells with sand bridges, cuttings beds, or pack‑offs that require a sharp downward blow to clear
Deep wells, deviated wells, and horizontal wells where long stroke and large jarring force are beneficial
Both onshore and offshore fishing jobs requiring a durable, lubricated bumper sub for extended cycling
The BX bumper sub is particularly recommended for applications where repeated downward jarring is needed, and where internal lubrication will significantly extend tool life compared to non‑lubricated designs.
Value Proposition
Extended Service Life – Hydraulic oil lubrication dramatically reduces internal wear, allowing more jarring cycles before maintenance.
Large Jarring Force – Long stroke combined with robust construction delivers powerful impacts for stubborn stuck fish.
Adjustable Downward Release – Field‑adjustable force settings optimize performance for different downhole conditions.
High Strength – Generous tensile and torsional ratings ensure the tool can withstand the most demanding fishing operations.
Versatile Sizing – Four models cover common BHA diameters from 4‑3/4″ to 8″.
The BX lubricated fishing bumper sub is a durable, high‑performance downward jarring tool that combines long stroke, large impact force, and internal hydraulic oil lubrication to deliver reliable stuck pipe release with extended service life.
Contact Us
For technical data sheets, force adjustment guidance, or a quotation, please contact:
Email: info@hyrig.com
BX – Lubricated for longer life, built for larger impact.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.