Overview
The KX series fishing bumper sub is a mechanical jarring tool specifically designed for downhole fishing operations. It delivers repeated jarring impacts on stuck drill stem, gradually loosening the stuck point until release is achieved. Unlike pure jarring tools, if lifting and jarring alone cannot free the fish, the bumper sub can still rotate the fishing string, allowing additional recovery techniques. When used in combination with a mechanical internal cutter, the fishing bumper sub provides a preset constant forward force, ensuring stable and consistent cutting of the fish. When working with back off tools, it compensates an up stroke for the connection after backing off, facilitating clean separation. This versatility makes the KX bumper sub an essential component in any fishing tool string.
Key Features
Mechanical Jarring Action – Delivers repeated, controllable upward impacts to loosen stuck drill stem.
Rotational Capability – If jarring alone does not release the fish, the tool can still transmit rotation to the fishing assembly.
Constant Forward Force for Cutting – When used with an internal cutter, provides a preset, steady force for reliable cutting operations.
Up‑Stroke Compensation for Back Off – Works with back off tools to provide the necessary upward stroke after thread separation.
Simple & Rugged – All‑mechanical design with no hydraulic seals to fail; reliable in high‑temperature and dirty environments.
Wide Model Range – Seven models covering OD from 86 mm (3‑3/8″) to 203 mm (8″) to fit most hole sizes and casing.
Working Principle
The KX fishing bumper sub operates on a purely mechanical principle. It consists of a mandrel that can slide axially within an outer housing, with a mechanical latch or spring mechanism that stores energy when the string is lifted. When the preset overpull is reached, the latch releases suddenly, allowing the mandrel to stroke upward and deliver a sharp impact to the stuck fish. The tool can be cycled repeatedly simply by lifting and lowering the drill string.
If jarring fails to free the fish, the bumper sub still transmits full torque through its splined or hex drive mechanism, allowing the operator to rotate the fishing string.
When used with a mechanical internal cutter, the bumper sub is set to deliver a specific constant forward force (by adjusting the spring preload or latch setting). This ensures the cutter maintains steady engagement with the fish, producing a clean, uniform cut.
When used with back off tools, the bumper sub provides a controlled up stroke after the back off operation, compensating for any upward movement of the connection and preventing premature re‑engagement.
Technical Specifications
| Model | OD mm (inch) | ID mm (inch) | Connection | Max Tensile Load KN (lbf) | Tensile Yield KN (lbf) | Limited Torque KNm (lbf·ft) | Torsional Yield KNm (lbf·ft) | Max Stroke mm (inch) | OAL mm (ft) |
|---|---|---|---|---|---|---|---|---|---|
| KX86 | 86 (3-3/8) | 25.4 (1) | NC23 | 340 (76,000) | 610 (137,000) | 3 (2,200) | 5 (3,600) | 500 (19-11/16) | 1510 (5.0) |
| KX105 | 105 (4-1/8) | 31.8 (1-1/4) | NC31 | 700 (160,000) | 1100 (250,000) | 5 (3,800) | 10 (7,400) | 700 (27-9/16) | 1900 (6.2) |
| KX114 | 114 (4-1/2) | 31.8 (1-1/4) | NC31 | 900 (202,000) | 1620 (364,000) | 6 (4,400) | 11 (8,000) | 700 (27-9/16) | 1900 (6.2) |
| KX121 | 121 (4-3/4) | 38 (1-1/2) | NC38 | 1100 (247,000) | 1950 (438,000) | 8 (6,000) | 15 (11,000) | 1000 (39-3/8) | 2102 (6.9) |
| KX165 | 165 (6-1/2) | 50.8 (2) | NC50 | 1400 (315,000) | 2100 (472,000) | 13 (9,000) | 20 (14,000) | 1400 (55-1/8) | 2606 (8.5) |
| KX178 | 178 (7) | 50.8 (2) | NC50 | 1450 (326,000) | 2200 (495,000) | 15 (11,000) | 27 (19,000) | 1400 (55-1/8) | 2606 (8.5) |
| KX203 | 203 (8) | 70 (2-3/4) | 6-5/8 REG | 1500 (337,000) | 2400 (540,000) | 20 (14,000) | 35 (25,000) | 1500 (59-1/16) | 2729 (9.0) |
Note: Custom specifications and other connections are available upon request – refer to the technical agreement for details.
Applications
Fishing operations for stuck drill pipe, drill collars, casing, tubing, and downhole tools
Used with mechanical internal cutters to provide constant forward force for stable cutting
Used with back off tools to compensate up stroke after thread separation
Wells where jarring alone may not release the fish, but rotation is still possible
Both onshore and offshore fishing jobs requiring a versatile, all‑mechanical jarring tool
The KX fishing bumper sub is particularly valuable in complex fishing jobs where multiple techniques (jarring, rotating, cutting, backing off) may be needed in a single run.
Value Proposition
Versatile Fishing Tool – Combines jarring, rotation, constant‑force cutting, and back‑off compensation in one tool.
Reliable Mechanical Design – No hydraulic components; performs consistently in HPHT and abrasive environments.
Repeated Jarring Capability – Can be cycled many times without losing effectiveness.
Preset Constant Force – Ensures clean, stable cutting when used with internal cutters.
Wide Size Range – Seven models from slim hole (86 mm) to large diameter (203 mm) cover most fishing applications.
Cost‑Effective – Reduces the number of tool trips by combining multiple functions.
The KX series fishing bumper sub is a reliable, multi‑functional mechanical jarring tool that enhances fishing success rates by providing jarring, rotation, constant‑force cutting, and back‑off stroke compensation – all in a single, rugged package.
Contact Us
For technical data sheets, model selection guidance, or a quotation, please contact:
Email: info@hyrig.com
KX Fishing Bumper Sub – Jar, rotate, cut, back off – one tool, many solutions.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.