Overview
The incremental circulating valve is a type of bypass valve used in drilling operations. It is connected close to the drill bit before drilling into oil and gas layers. During well killing operations, if the drill bit becomes blocked (e.g., by formation cuttings, barite settling, or hydrate formation), the primary circulation path is lost. The incremental circulating valve provides a critical backup: it can establish a new circulation channel, allowing the killing operation to continue without interruption. The valve is actuated by dropping a ball from the surface, which opens the bypass ports and restores fluid circulation.
Key Features
Bypass Valve Design – Provides an alternative circulation path when the bit is blocked.
Installed Close to Bit – Positioned just above the drill bit for immediate bypass activation.
Ball‑Actuated – Simple and reliable drop‑ball mechanism; no complex electronics.
Ensures Continuous Well Killing – Prevents abandonment of killing operation due to bit blockage.
Five Models – JZX105, JZX121, JZX160, JZX178, JZX203 covering 105 mm to 203 mm OD.
API Connections – NC31, NC38, NC46, 5-1/2 FH, 6-5/8 REG for easy BHA integration.
Working Principle
The incremental circulating valve is normally closed, allowing fluid to pass only through the bit. It is run in the drill string just above the drill bit before drilling into the reservoir section. During a well killing operation, if the bit becomes blocked and circulation stops, the operator drops a ball of specified diameter from the surface. The ball lands on a seat inside the valve. Pump pressure is then increased, shifting an internal sleeve or shearing a pin, which opens bypass ports. Drilling fluid can now exit the valve directly into the annulus, bypassing the blocked bit. This restores circulation, allowing the killing operation to continue. The valve is “incremental” because it can be designed to activate only when a specific ball size is dropped, preventing accidental opening.
Technical Specifications
| Model | OD mm (inch) | ID mm (inch) | Ball Diameter mm (inch) | Connection |
|---|---|---|---|---|
| JZX105 | 105 (4-1/8) | 38 (1-1/2) | 38 (1-1/2) | NC31 B×P |
| JZX121 | 121 (4-3/4) | 50.8 (2) | 48 (1-7/8) | NC38 B×P |
| JZX160 | 160 (6-5/16) | 50.8 (2) | 65 (2-9/16) | NC46 B×P |
| JZX178 | 178 (7) | 57.2 (2-1/4) | 65 (2-9/16) | 5-1/2 FH B×P |
| JZX203 | 203 (8) | 57.2 (2-1/4) | 70 (2-3/4) | 6-5/8 REG B×P |
Note: Custom specifications and other connections are available upon request – refer to the technical agreement for details.
Applications
Well killing operations where drill bit blockage is a risk (e.g., high‑pressure gas wells, wells with reactive formations)
Placed close to the bit before drilling into oil and gas layers
Provides emergency circulation path when primary bit nozzles or flow paths are obstructed
Suitable for onshore and offshore drilling, including HPHT wells
Value Proposition
Prevents Abandoned Killing Jobs – Ensures circulation can be re‑established even if bit is blocked.
Simple Ball‑Drop Activation – Reliable, field‑proven technology with no surface intervention complexity.
Compact Design – Short length fits easily into BHA.
Multiple Sizes – Five models cover most common BHA diameters from 4‑1/8″ to 8″.
Cost Saving – Avoids lost time and potential well control escalation from blocked bit.
The JZX series incremental circulating valve is an essential safety and contingency tool for drilling operations in oil and gas layers. By providing a reliable bypass circulation channel when the bit becomes blocked during well killing, it ensures that killing operations can continue uninterrupted, protecting well control and saving rig time.
Contact Us
For technical data sheets, ball selection, or a quotation, please contact:
Email: info@hyrig.com
Incremental Circulating Valve – Bypass the blockage, continue the kill.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.