Special Bypass Valve – TPF Series – Complete Product Introduction

QR code
share
WeChat
Sina Weibo
QQ
QQ space
Douban
Baidu Post Bar
copy Link
Facebook
X
LinkedIn
Pinterest
Line
Tumblr
Special bypass valve is a downhole tool that provides circulation through pressure difference. When the differential pressure between the inside and outside of the tool reaches a preset value, the valve opens, allowing fluid to bypass from the drill string bore to the annulus (or vice versa). It is an ideal tool for use in high angle and horizontal wells where conventional circulating subs may be less reliable. The tool requires no dropped balls or mechanical intervention – it responds automatically to pressure changes. Available in two models: TPF121 (OD 121 mm, ID 25.4 mm, NC38 upper, 3-1/2 REG lower) and TPF159 (OD 159 mm, ID 38.1 mm, NC50 upper, 4-1/2 REG lower). Both have an overall length of 1270 mm (4.2 ft).

Conatct For Details
DetailReview(0)Additional

Overview
The special bypass valve is a downhole tool that provides circulation between the drill string bore and the annulus based on pressure difference (differential pressure). When the pressure inside the tool exceeds the outside pressure (or vice versa) by a preset threshold, the valve automatically opens, allowing fluid to bypass. This simple, reliable actuation method requires no dropped balls, electronic signals, or mechanical manipulation – it responds purely to hydraulic conditions. The special bypass valve is an ideal tool for use in high angle of inclination and horizontal wells, where gravity‑dependent tools may fail and where controlled circulation is critical for cleaning, spotting fluids, or equalizing pressure.

Key Features

  • Pressure Difference Actuation – Opens automatically when differential pressure reaches set point; no dropped balls or intervention required.

  • Ideal for High Angle & Horizontal Wells – Not reliant on gravity; works in any deviation.

  • Automatic Bypass Circulation – Provides a flow path between the bore and annulus when needed.

  • Simple & Reliable – No moving electronic or complex hydraulic components.

  • Two Models – TPF121 (4‑3/4″ OD) and TPF159 (6‑1/4″ OD) for common hole sizes.

  • Compact Length – 1270 mm (4.2 ft) for easy BHA integration.

Working Principle
The TPF bypass valve contains a piston or sleeve held in the closed position by a spring or shear mechanism. Under normal circulation, the pressure differential across the tool remains below the actuation threshold, and the valve remains closed – all fluid passes through the bore. When the operator increases pump pressure or when downhole conditions create a higher pressure inside the string (e.g., when tagging a bridge plug or when a washpipe is restricted), the differential pressure across the valve increases. Once the preset differential is exceeded, the piston shifts, opening ports that allow fluid to bypass from the inside to the outside (or outside to inside, depending on configuration). This bypass circulation can be used to clean the annulus, spot chemicals, equalize pressure across a packer, or prevent stuck pipe. When the differential pressure drops below the threshold, the valve may automatically close (if spring‑return) or remain open until manually reset (depending on design). The tool is particularly valuable in high‑angle and horizontal wells because its actuation does not depend on ball dropping or gravity.

Technical Specifications

ModelOD mm (inch)ID mm (inch)OAL mm (ft)Upper ConnectionLower Connection
TPF121121 (4-3/4)25.4 (1)1270 (4.2)NC383-1/2 REG
TPF159159 (6-1/4)38.1 (1-1/2)1270 (4.2)NC504-1/2 REG

Note: Custom specifications, pressure setting thresholds, and other connections are available upon request – refer to the technical agreement for details.

Applications

  • High angle and horizontal wells where conventional circulating subs may be unreliable

  • Wellbore cleaning operations requiring selective bypass circulation

  • Spotting chemical pills or treating fluids at a specific depth

  • Equalizing pressure across a packer or downhole tool

  • Preventing stuck pipe by enabling circulation when the string becomes packed off

  • Both drilling and workover/completion operations

Value Proposition

  • Automatic Operation – No need for dropped balls or complex surface sequences; responds to pressure changes.

  • Gravity‑Independent – Works perfectly in deviated, horizontal, and high‑angle wells.

  • Compact & Simple – Short length and rugged design fit easily into any BHA.

  • Two Sizes – Covers common BHA diameters from 4‑3/4″ to 6‑1/4″.

  • Reliable – No electronics; purely hydraulic/mechanical actuation.

The TPF series special bypass valve is a versatile and reliable tool for establishing circulation on demand in challenging well profiles. By opening automatically in response to pressure difference, it eliminates the need for ball drops or complex intervention, making it an ideal choice for high‑angle and horizontal wells.

Contact Us
For technical data sheets, pressure setting specifications, or a quotation, please contact:
Email: info@hyrig.com


Special Bypass Valve – Automatic circulation through pressure difference – ideal for high angle and horizontal wells.


Comment

comment
Name
Praise degree
Message:
Upload pictures:
    total 0 Sheet,Only 5 images can be uploaded, each less than 5m.
    Verification code
    Submit