Overview
The Multi‑Cycle Circulating Sub (MCCS) is a downhole tool that provides the ability to open and close the circulation path between the sub’s inside (drill string bore) and outside (annulus) multiple times during a single run. The tool is actuated by dropping balls from the wellhead – each ball dropped will either open or close the sub, allowing the operator to cycle the circulation ports as needed. This eliminates the need to pull out of hole to reset or replace a single‑use circulating sub. The MCCS is particularly suitable for horizontal and extended‑reach wells, where access is limited and multiple circulation events are often required. It is commonly used in cleaning operations (removing debris, cuttings, or cement) and in leakage testing processes (isolating zones, pressure testing).
Key Features
Multiple Open/Close Cycles – Each dropped ball toggles the sub between open and closed positions; can be cycled many times in one run.
Ball‑Actuated – Simple, reliable actuation using standard dropped balls (no complex electronics or hydraulics).
Suitable for Horizontal & Extended Reach Wells – Works in deviated and long lateral sections where conventional circulating subs may fail.
Cleaning & Leak Testing – Ideal for circulating out debris, spotting pills, or performing zone isolation tests.
Three Models – MCCS121 (4‑3/4″ OD), MCCS165 (6‑1/2″ OD), MCCS203 (8″ OD) to fit common hole sizes.
API Connections – NC38, NC50, and 6-5/8 REG for easy BHA integration.
Working Principle
The MCCS is placed in the drill string at the desired location. The sub contains an internal sleeve or sliding mechanism that opens or closes circulation ports (typically radial holes) when a ball lands on a seat. When a ball of a specific size is dropped from surface and pumped down, it lands on a seat inside the sub, applying hydraulic pressure that shifts the sleeve to either the open or closed position. After actuation, the ball can be pumped through (or retained) depending on the design. A subsequent ball of a different size or the same size (with a different seat arrangement) will shift the sleeve back to the opposite position. This allows the operator to repeatedly open and close circulation as many times as needed without tripping the tool. In horizontal and extended‑reach wells, the ball dropping method is reliable because it does not rely on gravity alone – pumping ensures ball delivery.
Technical Specifications
| Model | OD mm (inch) | ID mm (inch) | OAL mm (ft) | Connection |
|---|---|---|---|---|
| MCCS121 | 121 (4-3/4) | 44.5 (1-3/4) | 2705 (8.9) | NC38 B×P |
| MCCS165 | 165 (6-1/2) | 63.5 (2-1/2) | 3525 (11.6) | NC50 B×P |
| MCCS203 | 203 (8) | 76.2 (3) | 3570 (11.7) | 6-5/8 REG B×P |
Note: Custom specifications and other connections are available upon request – refer to the technical agreement for details.
Applications
Horizontal and extended‑reach well cleaning operations (circulating cuttings, debris, or cement residues)
Leakage testing – opening circulation to apply pressure to a specific zone, then closing to isolate
Spotting chemical pills or treating fluids at a precise depth
Multi‑stage wellbore treatments requiring multiple circulation cycles without tripping
Used in both drilling and workover/completion operations
Value Proposition
Reduces Trips – Multiple open/close cycles in one run saves significant rig time.
Simple & Reliable – Ball actuation is field‑proven, insensitive to wellbore deviation.
Versatile – Suitable for cleaning, testing, and treating operations in challenging well profiles.
Three Sizes – Covers common BHA diameters from 4‑3/4″ to 8″.
Cost Effective – Eliminates need for multiple single‑shot circulating subs.
The MCCS Multi‑Cycle Circulating Sub brings efficiency and flexibility to wellbore circulation operations. By allowing the operator to open and close the sub repeatedly by simply dropping balls, it eliminates unnecessary trips and enables complex cleaning and testing sequences in horizontal and extended‑reach wells.
Contact Us
For technical data sheets, ball sizing information, or a quotation, please contact:
Email: info@hyrig.com
Multi‑Cycle Circulating Sub – Open and close circulation on command, as many times as you need.
total 0 Sheet,Only 5 images can be uploaded, each less than 5m.